This paper assesses the effect of an inter-turn short circuit fault in stator windings of a Permanent Magnet Synchronous generator (PMSG)-based variable speed wind energy conversion system (WECS) connected to the grid by a power converters interface. The objective is to assess the impact of the fault on the WECS performances. This study has two tasks. The first one details a dynamic modeling of different subsystems of the WECS. The mathematical model of the defective PMSG is also set up. The second one presents an appropriate control strategy for the power converters interface. The control of the PMSG-side converter aims to ensure the operation in maximum power point tracking. The grid-side control was also established by controlling the active and reactive powers to ensure the operation in unity power factor and keeping the DC bus voltage stable. The performance of the control design was tested under healthy and faulty conditions.
AmiratYBenbouzidMEAl-AhmarE, et al. (2009) A brief status on condition monitoring and fault diagnosis in wind energy conversion systems. Renewable and Sustainable Energy Reviews13: 2629–2636.
2.
AubertBRegnierJCauxS, et al. (2013) On-line inter-turn short circuit detection in permanent magnet synchronous generators. In: 9th IEEE international symposium on diagnostics for electric machines, power electronics and drives (SDEMPED), Valencia, Spain, 27–30 August, pp.329–335. New York, NY: IEEE.
3.
BerzoyAMohamedAASMohammedO (2017) Impact of inter-turn short-circuit location on induction machines parameters through FE computations. IEEE Transactions on Magnetics53: 1–4.
4.
BoukettayaGNaifarO (2015) Improving grid connected hybrid generation system supervision with sensorless Control. Journal of Renewable and Sustainable Energy7: 043115.
5.
BouzidMBKChampenoisG (2017) An efficient simplified physical faulty model of a permanent magnet synchronous generator dedicated to stator fault diagnosis part II: Automatic stator fault diagnosis. IEEE Transactions on Industry Applications53(3): 2762–2771.
6.
CabanasMFNorniellaJGMeleroMG, et al. (2013) Detection of stator winding insulation failures: On-line and off-line tests. In: Proceedings of the 2013 IEEE workshop on electrical machines design control and diagnosis (WEMDCD), Paris, France, pp.210–219. New York, NY: IEEE.
7.
ChengSZhangPHabetlerTG (2011) An impedance identification approach to sensitive detection and location of stator turn-to-turn faults in a closed-loop multiple-motor drive. IEEE Transactions on Industrial Electronics58: 1545–1554.
8.
ExnowskiS (2012) Excitability of different modes of vibration of stator end windings. In: IECON 2012 – 38th Annual Conference on IEEE Industrial Electronics Society, Montreal, QC, Canada, 25–28 October, pp.1781–1785. New York, NY: IEEE.
9.
FaizJMoosaviSM (2016) Eccentricity fault detection – From induction machines to DFIG—a review. Renewable and Sustainable Energy Reviews55: 169–179.
10.
FaizJMoosaviSMM (2017) Detection of mixed eccentricity fault in doubly-fed induction generator based on reactive power spectrum. IET Electric Power Applications11(6): 1076–1084.
11.
FangJSunYWangY, et al. (2019) Improved ZSVC-based fault detection technique for incipient stage inter-turn fault in PMSM. IET Electric Power Applications13(12): 2015–2026.
12.
FreireNMACardosoAJM (2014) A fault-tolerant direct controlled PMSG drive for wind energy conversion systems. IEEE Transactions on Industrial Electronics61(2): 821–834.
13.
HongweiFYuzhuFRunanS, et al. (2018) Diagnosis of inter-turn short circuit and rotor eccentricity for PMSG used in wave energy conversion. In: IEEE applied power electronics conference and exposition (APEC), San Antonio, TX, 4–8 March, pp.3346–3352. New York, NY: IEEE.
14.
IbrahimRKWatsonSJDjurovicS, et al. (2018) An effective approach for rotor electrical asymmetry detection in wind turbine DFIGs. IEEE Transactions on Industrial Electronics65: 8872–8881.
15.
IslamMRGuoYZhuJ (2014) A review of offshore wind turbine nacelle: Technical challenges, and research and developmental trends. Renewable and Sustainable Energy Reviews33: 161–176.
16.
JeongHMoonSKimSW (2017) An early stage inter-turn fault diagnosis of PMSMs by using negative-sequence components. IEEE Transactions on Industrial Electronics64: 5701–5708.
17.
KrimYAbbesDKrimS, et al. (2019a) A flexible control strategy of a renewable active generator to participate in system services under grid faults. International Transactions on Electrical Energy Systems29(1): e2687.
18.
KrimYAbbesDKrimS, et al. (2019b) A second-order sliding-mode control for a real time emulator of a wind power system synchronized with electrical network. International Transactions on Electrical Energy Systems29(9): e12051.
19.
KrimYAbbesDKrimS, et al. (2018) Classical vector, first-order sliding-mode and high-order sliding-mode control for a grid-connected variable-speed wind energy conversion system: A comparative study. Wind Engineering42(1): 16–37.
20.
KrimYKrimSMimouniMF (2016) Control of a wind farm connected to the grid at a frequency and variable voltage. International Journal of Renewable Energy Research 6(v6i3): 747–758.
21.
Lamim FilhoPCPederivaRBritoJN (2014) Detection of stator winding faults in induction machines using flux and vibration analysis. Mechanical Systems and Signal Processing42: 377–387.
22.
MoosaviSMFaizJAbadiMB, et al. (2019) Comparison of rotor electrical fault indices owing to inter-turn short circuit and unbalanced resistance in doubly-fed induction generator. IET Electric Power Applications13(2): 235–242.
23.
NajafiPRajaeiAMohamadianM, et al. (2013) Vienna rectifier and B4 inverter as PMWECS grid interface. In: IEEE conference on electrical engineering (ICEE), Mashhad, Iran, 14–16 May, pp.1–5. Piscataway, NJ: IEEE.
24.
QiaoWLuD (2015) A survey on wind turbine condition monitoring and fault diagnosis—part I: Components and subsystems. IEEE Transactions on Industrial Electronics62(10): 6536–6545.
25.
RekikMAbdelkafiAKrichenL (2013) A novel control strategy of a distributed generator operating in seven modes for ancillary services under grid faults. International Journal of Electrical Power & Energy Systems47: 100–108.
26.
RoshanfekrRJalilianA (2015) Analysis of rotor and stator winding inter-turn faults in WRIM using simulated MEC model and experimental results. Electric Power Systems Research119: 418–424.
27.
SellamiTBerririHJelassiS, et al. (2017) Short-circuit fault tolerant control of a wind turbine driven induction generator based on sliding mode observers. Energies10: 1611.
28.
StojcicGPasanbegovicKWolbankTM (2014) Detecting faults in doubly fed induction generator by rotor side transient current measurement. IEEE Transactions on Industry Applications50(5): 3494–3502.
29.
TetreaultAZhengpingZ (2013) End-winding vibration monitoring: Pivotal in preventing major damage on a large turbogenerator. In: IEEE electrical insulation conference (EIC), Ottawa, ON, 2–5 June, pp.1–6. New York, NY: IEEE.
30.
WolkiewiczMTarchalaGOrlowska-KowalskaT, et al. (2016) Online stator interturn short circuits monitoring in the DFOC induction-motor drive. IEEE Transactions on Industrial Electronics63: 2517–2528.
31.
YangWCourtRJiangJ (2013) Wind turbine condition monitoring by the approach of SCADA data analysis. Renewable Energy53: 365–376.
32.
YaramasuVWuBRiveraM, et al. (2014) A new power conversion system for megawatt PMSG wind turbines using four-level converters and a simple control scheme based on two-step model predictive strategy—Part II: Simulation and experimental analysis. IEEE Journal of Emerging and Selected Topics in Power Electronics2: 14–25.
