Rotor imbalance detection and quantification in wind turbines via vibration analysis

Abstract

Rotor imbalance is a common fault in wind turbines, which may enhance radial loads that induce faults on the main bearing and gearbox. It usually results from the asymmetry of the air dynamics caused by blade crack, icing, etc. A simple and effective method on rotor imbalance detection and quantification is presented using the vibration signal collected from the accelerometer monitoring the wind turbine drive train. A vibration model describing the rotor imbalance under blade crack is proposed. The complex morlet wavelet transform is applied to the detection of the rotational frequency of rotor hub which represents the rotor hub. A health indicator that can quantify the degree of the rotor imbalance is designed. The proposed methods have successfully detected and quantified the rotor imbalance caused by blade crack in an on-site wind turbine.

Keywords

Wind turbine blades rotor imbalance complex wavelet transform fault detection and quantification

Get full access to this article

View all access options for this article.

References

Amenabar

Mendikute

Lopez-Arraiza

, et al. (2011) Comparison and analysis of non-destructive testing techniques suitable for delamination inspection in wind turbine blades. Composites Part B 42(5): 1298–1305.

Fitzgerald

Arrigan

Basu

(2010) Damage detection in wind turbine blades using time-frequency analysis of vibration signals. In: IEEE international joint conference on neural networks, Barcelona, Spain, 18–23 July, pp.1–5.

Freebury

Musial

(2000) Determining equivalent damage loading for full-scale wind turbine blade fatigue tests. In: The 19th American Society of Mechanical Engineers (ASME) wind energy symposium, Reno, NV, USA, 10–13 January.

Ghoshal

Sundaresan

Schulz

, et al. (2000) Structural health monitoring techniques for wind turbine blades. Journal of Wind Engineering and Industrial Aerodynamics 85(3): 309–324.

Igba

Alemzadeh

Henningsen

, et al. (2015) Effect of preventive maintenance intervals on reliability and maintenance costs of wind turbine gearboxes. Wind Energy 18(11): 2013–2024.

Joosse

Blanch

Dultton

, et al. (2002) Acoustic emission monitoring of small wind turbine blades In: ASME wind energy symposium, aerospace sciences meetings, Reno, NV, USA, 14–17 January, pp.400–406.

Liu

Wang

Zhang

(2020) Fault diagnosis of industrial wind turbine blade bearing using acoustic emission analysis. IEEE Transactions on Instrumentation and Measurement 69(9): 6630–6639.

Ribrant

Bertling

(2007) Survey of failures in wind power systems with focus on Swedish wind power plants during 1997-2005. IEEE Transactions on Energy Conversion 22: 167–173.

Tang

Soua

Mares

, et al. (2016) An experimental study of acoustic emission methodology for in service condition monitoring of wind turbine blades. Renewable Energy 99(12): 170–179.

10.

Tsai

Hsieh

Lew

(2009) Detection of wind turbine blades damage by spectrum-recognition using Gaussian wavelet-entropy. In: International conference on anti-counterfeiting, Hong Kong, China, 20–22 August, pp.108–113. New York, NY: IEEE Press.

11.

Wang

Zhang

(2017) Automatic detection of wind turbine blade surface cracks based on UAV-taken images. IEEE Transactions on Industrial Electronics 64(9): 7293–7303.

12.

Yan

Smith

Clayton

, et al. (2004) Infrared thermography for non-destructive testing of wind turbine blades. In: The 3rd world wind energy conference and renewable energy, Beijing, China, 1 October–4 November.

13.

Zhang

Jackman

(2013) A feasibility study of wind turbine blade surface crack detection using an optical inspection method. In: IEEE international conference on renewable energy research & applications, Madrid, Spain, 20–23 October, pp.20–23.

14.

Zhao

Shao

, et al. (2015) Damage detection of wind turbine blade based on wavelet analysis. In: 2015 8th International Congress on Image and Signal Processing (CISP), Shenyang, China, 14–16 October, pp.1406–1410. New York, NY: IEEE.