The application of protective coating systems is the major measure against the corrosion of steel for tower sections of wind turbines. The inspection, condition monitoring and maintenance of protective coating system is a demanding and time-consuming procedure and requires high human effort. The paper introduces for the first time a Digital Twin concept for the condition monitoring and prescriptive maintenance planning for surface protection systems on wind turbine towers. The initial point of the concept is an in-situ Virtual Twin for the generation of reference areas for condition monitoring. The paper describes the integration of an online image annotation and processing tool, a maintenance model, corrosive resistance parameters, structural load parameters, and sensor data into the Digital Twin concept. The prospects of the concept and its practical relevance are shown for tower structures of large onshore wind turbines.
BenarieMLipfertFL (1986) A general corrosion function in terms of atmospheric pollutant concentrations and rain pH. Atmospheric Environment20(10): 1947–1958.
2.
BontempiFLiHPetriniF, et al. (2008) Basis of design of offshore wind turbines by system decomposition. In: The 4th international conference on advantages in structural engineering and mechanics (ASEM’08), Jeju, Korea, 26–28 May 2008, pp.3199–3218.
3.
BotzMEmirogluAOsterminskiK, et al. (2020) Überwachung und Modellierung der Tragstruktur von Windenergieanlagen. Beton- und Stahlbetonbau115(5): 342–354.
4.
ChicoBde la FuenteDDíazI, et al. (2017) Annual atmospheric corrosion of carbon steel worldwide: An integration of ISOCORRAG, ICP/UNECE and MICAT databases. Materials10(6): 1–26.
5.
CorvoFPérezTMartinY, et al. (2008) Corrosion research frontiers – Atmospheric corrosion in tropical climate – On the concept of time of wetness and its interaction with contaminants deposition. In: SmitheGM (ed.) Electroanalytical Chemistry: New Research. Chapter 2. Hauppauge, NY: Nova Science Publishers, Inc. pp. 61–91.
6.
DNVGL (2018) Support Structures for Wind Turbines. DNVGL-ST-0126. Norway: DNV GL AS.
7.
ErrandoneaIBeltránSArrizabalagaS (2020) Digital twin for maintenance: A literature review. Computers in Industry123: 103316.
8.
FeliuSMorcilloMFeliuS (1993) The prediction of atmospheric corrosion from meteorological and pollution parameters—II. Long-term forecasts. Corrosion Science34(3): 415–422.
9.
GaoJLiCLvZ, et al. (2019) The establishment of correlation model between the surface aging of organic protective coatings and environmental factors. In: Eurocorr 2019 congress, Seville, Spain, 9–13 September 2019.
10.
GrosseCU (2019) Monitoring and inspection techniques supporting a Digital Twin concept in civil engineering. In: Proceedings of the 5th international conference on sustainable construction materials technology, Coventry University, London, 14–17 July 2019.
11.
ISO 12944-2 (2018) Paints and Varnishes - Corrosion Protection of Steel Structures by Protective Paint Systems - Part 1: Classification of Environment. Geneva, Switzerland: International Standard Organization, p.2018.
12.
ISO 9223 (2012) Corrosion of Metals and Alloys – Corrosivity of Atmospheres - Classification. Determination and Estimation. Geneva, Switzerland: International Standard Organization, p.2012.
13.
JeffreyRMelchersRE (2008) Three years observations of corrosion losses for steels at a severe marine atmospheric site. In: Proceedings Australasian corrosion congress, Wellington, New Zealand, November 2008, Paper 039.
14.
JonesDSniderCNassehiA, et al. (2020) Characterising the Digital Twin: A systematic literature review. CIRP Journal of Manufacturing Science and Technology29: 36–52.
15.
KihiraHSenumaTTanakaM, et al. (2005) A corrosion prediction method for weathering steels. Corrosion Science47: 2377–2390.
16.
KlassenRDRobergePRLenardDR, et al. (2002) Corrosivity patterns near sources of salt aerosols. In: TownsendHE (ed.) Outdoor Atmospheric Corrosion. West Conshohocken, PA: ASTM, pp.19–33.
17.
KritzlerMFunkMMichahellesF, et al. (2017) The Virtual Twin: Controlling smart factories using a spatially-correct augmented reality representation. In: Proceedings seventh international conference on the Internet of Things (IoT’17), Linz, Austria, 22–25 October 2017, Paper 38.
18.
KühneU (2015) Umwelteinflüsse auf Offshore-Windenergieanlagen. Abschlussbericht Projekt 0325255A, Institut für Windenergie. Bremerhaven: Hochschule Bremerhaven.
19.
LangenkämperDZurowietzMSchoeningT, et al. (2017) BIIGLE 2.0 – Browsing and annotating large marine image collections. Frontiers in Marine Science4(83): 1–10.
20.
MadniAMadniCLuceroS (2019) Leveraging digital twin technology in model-based systems engineering. Systems7(1): 7–13.
21.
MartinJWSaundersSCFloydFL, et al. (1994) Methodologies for Predicting the Service Lives of Coating Systems. NIST Building Science Series No. 172. Gaithersburg, MD: The National Institute of Standards and Technology.
22.
MeiraGRAndradeCAlonsoC, et al. (2008) Modelling sea-salt transport and deposition in marine atmosphere zone – A tool for corrosion studies. Corrosion Science50: 2724–2731.
23.
MikhailovAA (2001) Dose-response functions as estimates of the effect of acid precipitates on materials. Protection of Metals37(4): 357–366.
24.
Minos-StensrudMHaakstadOHSakseidO, et al. (2018) Towards automated 3D reconstruction in SME factories and digital twin model generation. In: Proceedings of 18th international conference on control, automation and systems (ICCAS), PyeongChang, GangWon, Korea, 17–20 October 2018, pp.1777–1781. New York, NY: IEEE.
25.
MoghadamFKNejadAR (2022) Online condition monitoring of floating wind turbines drivetrain by means of digital twin. Mechanical Systems and Signal162: 108087.
26.
MöllerTBrünDLangenkämperD, et al. (2020) 3D reconstruction of on-/offshore wind turbines for manual and computational visual inspection. The International Archives of the Photogrammetry, Remote Sensing and Spatial Information Sciences XLIII-B2-2020: 1121–1127.
27.
MomberANattkemperTLangenkämperD, et al. (2021) Digitalisierung und Verarbeitung von Sensordaten für die Zustandsbewertung von Oberflächenschutzsystemen stählerner Türme von Onshore-Windenergieanlagen. Stahlbau90(7): 528–541.
28.
MomberAW (2016) Quantitative performance assessment of corrosion protection systems for offshore wind power transmission platforms. Renewable Energy94: 314–327.
29.
MomberAWBrünD (2021) The use of sensor data for the monitoring of corrosion processes on offshore wind power structures. In: WESC 2021 – Wind energy science conference, Hannover, Germany, 25–28 May 2021.
30.
MomberAWMarquardtT (2018) Protective coatings for offshore wind energy devices (OWEAs): A review. Journal of Coatings Technology and Research15(1): 13–40.
31.
MühlbergK (2010) Corrosion protection of offshore wind turbines – A challenge for the steel builder and paint applicator. Journal of Protective Coatings and Linings27(3): 20–32.
32.
PanchenkoYMarshakovANikolaevaL, et al. (2020) Development of models for the prediction of first-year corrosion losses of standard metals for territories with a coastal atmosphere in various climatic regions of the world. Corrosion Engineering Science and Technology55(8): 655–669.
33.
PanchenkoYMStrekalovPVZhilikovVP, et al. (2012) Corrosion resistance of D16 alloy depending on the salinity and meteorological parameters of coastal atmosphere. Protection of Metals and Physical Chemistry of Surfaces48(7): 740–750.
34.
PerattaCAdeyPBaynhamJ, et al. (2021) Supporting integrity management with a CP Digital Twin. NACE Corrosion, paper NACE-2021-16401, 2021. Houston, TX: NACE International.
35.
SahooAKMajumderUNielsenMW, et al. (2017) Strength of shear web with circular hole in wind turbine blades and using digital twining concept to reduce material testing. In: Proceedings of the ASME 2017 gas turbine India conference, Bangalore, India, 7–8 December 2017, Paper GTINDIA2017-4603.
36.
SantagatiCInzerilloLDi PaolaF (2013) Image-based modeling techniques for architectural heritage 3D digitalization: Limits and potentialities. International Archives of the Photogrammetry, Remote Sensing and Spatial Information Science XL-5/W2(2): 555–560.
37.
SantanaJJCanoVVasconcelosHC, et al. (2020) The influence of test-panel orientation and exposure angle on the corrosion rate of carbon steel. Mathematical modelling. Metals10(2): 196–213.
38.
SchoeningTOsterloffJNattkemperTW (2016) RecoMIA—Recommendations for marine image annotation: Lessons learned and future directions. Frontiers in Marine Science3(59): 1–11.
39.
ShinoharaTMotodaSOshikawaW (2005) Evaluation of corrosivity in atmospheric environment by ACM (atmospheric corrosion monitor) type corrosion sensor. Materials Science Forum475–479: 61–64.
40.
SivalingamKSpringMSepulvedaM, et al. (2018) A review and methodology development for remaining useful life prediction of offshore fixed and floating wind turbine power converter with Digital Twin technology perspective. In: Proceedings of the 2nd international conference on green energy and environmental technology, Rome, Italy, 16 July 2018, pp.197–204.
41.
SlamovaKGlaserRSchillC, et al. (2012) Mapping atmospheric corrosion in coastal regions: Methods and results. Journal of Photonics for Energy2: 022003-1/11.
42.
StarkRDamerauT (2019) Digital Twin. In: ChattiSTolioT (eds) CIRP Encyclopedia of Production Engineering. Berlin, Heidelberg: Springer. DOI: 10.1007/978-3-642-3590-7-16870-1.
43.
TaylerMLBlantonMKoneckiC, et al. (2015) Scribe creep and underpaint corrosion on ultra-high molecular weight epoxy resin coated 1018 steel part 2: Scribe creep model as a function of environmental severity factors. Corrosion71(3): 326–342.
44.
TchakouaPWamkeueROuhroucheM, et al. (2014) Wind turbine condition monitoring: State-of-the-art review, new trends, and future challenges. Energies7: 2595–2630.
45.
Tellez-SchmillRVicentE (2020) Mitigating corrosion with a digital twin. PTQ Q4: 39–45.
46.
VeraRArayaRGarínC, et al. (2019) Study on the effect of atmospheric corrosion on mechanical properties with impact test: Carbon steel and galvanized steel. Materials and Corrosion70(7): 1151–1161.
47.
WangMWangCHnydiuk-StefanA, et al. (2021b) Recent progress on reliability analysis of offshore wind turbine support structures considering digital twin solutions. Ocean Engineering232: 109168.
48.
WangZWangYSobayA (2021a) Development of a global corrosion map towards digital twin applications for marine structures. In: 8th international conference on marine structures (MARSTRUCT 2021), Trondheim, Norway, 7–9 June 2021.
49.
WuBYuBWuQ, et al. (2017) A graph-based approach for 3D building model reconstruction from airborne lidar point clouds. Remote Sensing9(1): 92.
