Wind turbine selection and optimal hub height positioning are crucial elements of wind power projects. However, in higher class wind speeds especially, over-exposure of wind turbines can lead to a reduction in power generation capacity. In this study, wind measurements from a met mast were validated according to specifications issued by IRENA and NREL. As a first step, it is shown that commercial WTGs from a database may be matched to the wind class and turbulence intensity. Secondly, a wind turbine selection algorithm, based on maximisation of capacity factor, was implemented across the range of WTGs. The selected WTGs were further exposed to an iterative algorithm using pointwise air density and wind shear coefficients. It is shown that a unique maximum capacity factor, and hence wind power generation, exists for a wind turbine, premised on its eventual over-exposure to the wind resource above a certain hub height.
AkdağSAGlerO (2011) A comparison of wind turbine power curve models. Energy Sources, Part A33(24): 2257–2263.
2.
AlamMMRehmanSMeyerJP, et al. (2011) Review of 600–2500 kW sized wind turbines and optimization of hub height for maximum wind energy yield realization. Renewable and Sustainable Energy Reviews15(8): 3839–3849.
3.
AlbadiMHEl-SaadanyEF (2010) New method for estimating CF of pitch-regulated wind turbines. Electric Power Systems Research80(9): 1182–1188.
4.
Bañuelos-RuedasFAngeles-CamachoCRios-MarcuelloS (2011) Methodologies used in the extrapolation of wind speed data at different heights and its impact in the wind energy resource assessment in a region. In: SuvireG.O. (ed.) Wind Farm: Technical Regulations, Potential Estimation and Siting Assessment. InTechOpen, pp.97–114.
5.
CarrilloCMontañoAOCidrásJ, et al. (2013) Review of power curve modelling for wind turbines. Renewable and Sustainable Energy Reviews21: 572–581.
6.
ChangT-PLiuF-JKoH-H, et al. (2014) Comparative analysis on power curve models of wind turbine generator in estimating capacity factor. Energy73: 88–95.
7.
IEC (2005) IEC 61400-12-1 Standard: Power performance measurements of electricity producing wind turbines. International Electrotechnical Commission.
LeeJChoWLeeK-S (2014) Optimization of the hub height of a wind turbine. Journal of Industrial and Intelligent Information2(4): 275–279.
10.
LeeJKimDRLeeK-S (2015) Optimum hub height of a wind turbine for maximizing annual net profit. Energy Conversion and Management100: 90–96.
11.
LubitzW (2009) Effects of tower shadowing on anemometer data. In: Proceedings: 11th Americas conference on wind engineering, San Juan, Puerto Rico, 22–26 June.
12.
ManwellJFMcGowanJGRogersAL (2010) Wind Energy Explained: Theory, Design and Application, 2nd edn. Chichester: John Wiley & Sons.
NREL (1997) Wind resource assessment handbook: Fundamentals for conducting a successful monitoring program. Available at: https://www.nrel.gov/docs/legosti/fy97/22223.pdf (accessed 22 July 2019).
15.
PallabazzerR (1995) Evaluation of wind-generator potentiality. Solar Energy55(1): 49–59.
RajMMAlexanderMLydiaM (2011) Modeling of wind turbine power curve. In: ISGT2011-India, Kollam, India, 1–3December2011, pp.144–148. New York: IEEE.
18.
RehmanSAl-HadhramiLMAlamMM, et al. (2013) Empirical correlation between hub height and local wind shear exponent for different sizes of wind turbines. Sustainable Energy Technologies and Assessments4(1): 45–51.
19.
RenGLiuJWanJ, et al. (2018) The analysis of turbulence intensity based on wind speed data in onshore wind farms. Renewable Energy123: 756–766.
RodriguezRN (1977) A guide to the Burr type XII distributions. Biometrika64(1): 129–134.
22.
Taslimi-RenaniEModiri-DelshadMEliasMFM, et al. (2016) Development of an enhanced parametric model for wind turbine power curve. Applied Energy177: 544–552.
23.
TongW (2010) Wind power generation and wind turbine design. Southampton: WIT Press.
