In this study, the I-beam structure of a utility-scale blade is used as the basis for the design of a small-scale subcomponent emulating the same type of structural element of a utility-scale wind turbine blade. Governing equations for the bending of a shear deformable thin-walled composite I-beam are considered. Similitude theory is applied to derive the corresponding scaling laws. Accuracy of the derived scaling laws in predicting the strain and displacement fields of the full-scale I-beam is considered as a design criterion for small-scale I-beams. Both complete and partial similarity cases are discussed. A novel approach is proposed to design partially similar scaled I-beams with totally different layups from those of the full-scale I-beam. Using the proposed technique, scaled-down composite I-beams are designed that predict the strain and displacement fields of their full-scale parent I-beam with very good accuracy.
AslMENiezreckiCSherwoodJet al. (2014) Application of structural similitude theory in subcomponent testing of wind turbine blades. In: Proceedings of the American society for composites, La Jolla, CA, 8–10 September.
2.
AslMENiezreckiCSherwoodJet al. (2015) Predicting the vibration response in subcomponent testing of wind turbine blades. In: AllemangR (ed.) Special Topics in Structural Dynamics, vol. 6. Cham: Springer, pp. 115–123.
3.
AslMENiezreckiCSherwoodJet al. (2016a) Similitude analysis of composite I-beams with application to subcomponent testing of wind turbine blades. In: SciammarellaCConsidineJGloecknerP (eds) Experimental and Applied Mechanics, vol. 4. Cham: Springer, pp. 115–126.
4.
AslMENiezreckiCSherwoodJet al . (2016b) Similitude analysis of the strain field for loaded composite I-beams emulating wind turbine blades. In: Proceedings of the American Society for Composites: Thirty-First Technical Conference.
5.
AslMENiezreckiCSherwoodJet al. (2016c) Design of scaled-down composite I-beams for dynamic characterization in subcomponent testing of a wind turbine blade. In: Shock & Vibration, Aircraft/Aerospace, Energy Harvesting, Acoustics & Optics, vol. 9.Springer International Publishing, pp. 197–209.
6.
AslMENiezreckiCSherwoodJet al. (2017) Vibration prediction of thin-walled composite I-beams using scaled models. Thin-Walled Structures113: 151–161.
7.
CairnsDSSkramstadJDMandellJF (1999) Evaluation of hand lay-up and resin transfer molding in composite wind turbine blade structures. In: Proceedings of the international SAMPE symposium and exhibition (SAMPE), SAMPE, Chicago, IL, 26–30 October, pp. 967–980.
8.
CamponeschiETJr (1994) The effects of specimen scale on the compression strength of composite materials. In: Proceedings of the scaling effects in composite materials and structures, NASA Langley Research Center, July 1994.
9.
FrostigYSimitsesG (2004) Similitude of sandwich panels with a “soft” core in buckling. Composites Part B: Engineering35: 599–608.
10.
GriffithDTAshwillTD (2011) The Sandia 100-meter all-glass baseline wind turbine blade: SNL100-00. Report no. SAND2011-3779. Albuquerque, NM: Sandia National Laboratories.
11.
GrimesGC (1994) Experimental observations of scale effects on bonded and bolted joints in composite structures. In: Proceedings of the scaling effects in composite materials and structures, NASA Langley Research Center, July 1994.
12.
IlbeigiSChelidzeD (2016a) Model order reduction of nonlinear Euler-Bernoulli beam. In: Nonlinear Dynamics, vol. 1.Springer International Publishing, pp. 377–385.
13.
IlbeigiSChelidzeD (2016b) Reduced order models for systems with disparate spatial and temporal scales. In: Rotating Machinery, Hybrid Test Methods, Vibro-Acoustics & Laser Vibrometry, vol. 8.Springer International Publishing, pp. 447–455.
14.
JacksonKE (1990) Scaling effects in the static and dynamic response of graphite-epoxy beam-columns. PhD Thesis, Virginia Tech, Blacksburg, VA.
15.
JensenFMFalzonBGAnkersenJet al. (2006) Structural testing and numerical simulation of a 34 m composite wind turbine blade. Composite Structures76: 52–61.
16.
JohnsonDMortonJKellasSet al. (1994) Scaling Effects in the Tensile and Flexure Response of Laminated Composite Coupons. Washington, DC: NASA, p. 265.
17.
LaustsenSLundEKühlmeierLet al. (2014) Development of a high-fidelity experimental substructure test rig for grid-scored sandwich panels in wind turbine blades. Strain50: 111–131.
18.
LeeJ (2005) Flexural analysis of thin-walled composite beams using shear-deformable beam theory. Composite Structures70: 212–222.
19.
LuoZZhaoXZhuYet al. (2014) Determination method of the structure size interval of dynamic similar models for predicting vibration characteristics of the isotropic sandwich plates. Journal of Vibroengineering16: 608–622.
20.
LuoZZhuYPZhaoXYet al. (2015) High-order vibrations’ dynamic scaling laws of distorted scaled models of thin-walled short cylindrical shells. Mechanics Based Design of Structures and Machines43: 514–534.
21.
MandellJFCombsDESamborskyDD (1995) Fatigue of fiberglass beam substructures. Wind Energy16: 99.
22.
MandellJFCreedRJJrPanQet al. (1994) Fatigue of fiberglass generic materials and substructures. Wind Energy15: 207–213.
23.
MeruaneVDe RosaSFrancoF (2015a) Investigations into the use of exact and distorted structural similitudes for the frequency response of plates. In: Proceedings of the noise and vibration-emerging technologies, Dubrovnik, 13–15 April, paper no. 48487.
24.
MeruaneVDe RosaSFrancoF (2015b) Numerical and experimental results for the frequency response of plates in similitude. Proceedings of the Institution of Mechanical Engineers, Part C: Journal of Mechanical Engineering Science230; 3212–3221.
25.
ObrienTK (1994) Damage and strength of composite materials: Trends, predictions, and challenges. In: Proceedings of the scaling effects in composite materials and structures, NASA Langley Research Center, July 1994.
26.
ReddyJN (2004) Mechanics of Laminated Composite Plates and Shells: Theory and Analysis. Boca Raton, FL: CRC Press.
27.
RezaeepazhandJSimitsesGJ (1995) Use of scaled-down models for predicting vibration response of laminated plates. Composite Structures30: 419–426.
28.
RezaeepazhandJSimitsesGJ (1997) Structural similitude for vibration response of laminated cylindrical shells with double curvature. Composites Part B: Engineering28: 195–200.
29.
RezaeepazhandJYazdiAA (2011) Similitude requirements and scaling laws for flutter prediction of angle-ply composite plates. Composites Part B: Engineering42: 51–56.
30.
RezaeepazhandJSimitsesGJStarnesJHJr (1995) Design of scaled down models for stability of laminated plates. AIAA Journal33: 515–519.
31.
RezaeepazhandJSimitsesGJStarnesJHJr (1996) Design of scaled down models for predicting shell vibration response. Journal of Sound and Vibration195: 301–311.
32.
SayerFAntoniouAVan WingerdeA (2012) Investigation of structural bond lines in wind turbine blades by sub-component tests. International Journal of Adhesion and Adhesives37: 129–135.
33.
SayerFPostNVan WingerdeAet al. (2009) Testing of adhesive joints in the wind industry. In: Proceedings of the European wind energy conference and exhibition (EWEC), Marseille, 16–19 March, pp. 288–315. Available at: http://publica.fraunhofer.de/documents/N-139652.html
34.
SimitsesGJRezaeepazhandJ (1993) Structural similitude for laminated structures. Composites Engineering3: 751–765.
35.
SimitsesGJRezaeepazhandJ (1995) Structural similitude and scaling laws for buckling of cross-ply laminated plates. Journal of Thermoplastic Composite Materials8: 240–251.
36.
WhiteDMusialWDEngbergS; Embry-Riddle Aeronautical University; National Renewable Energy Laboratory (2005) Evaluation of the New B-REX Fatigue Testing System for Multi-Megawatt Wind Turbine Blades. Golden, CO: National Renewable Energy Laboratory.
37.
YazdiAA (2012) Prediction flutter boundaries of laminated cylindrical shells using scaling laws. Journal of Aerospace Engineering27: 86–92.
38.
YazdiAA (2014) Study nonlinear vibration of cross-ply laminated plates using scale models. Polymer Composites35: 752–758.
39.
ZarouchasDSMakrisAASayerFet al. (2012) Investigations on the mechanical behavior of a wind rotor blade subcomponent. Composites Part B: Engineering43: 647–654.
