In this article, the fatigue strength in composite materials of wind turbine blades under dry–wet conditions is predicted using artificial neural networks. Compression–compression constant amplitude fatigue tests were performed on thermoset polymer resins including polyesters and vinyl esters. Coupons were tested under an air temperature of 20°C and 50°C in both “dry” and “wet” conditions. The results show that artificial neural network can provide accurate fatigue strength prediction for different resin matrices under different values of temperature.
Al-AssadiMEl-KadiHDeiabIM (2010) Predicting the fatigue life of different composite materials using artificial neural networks. Applied Composite Materials17(1): 1–14.
2.
Al-AssadiMEl-KadiHDeiabIM (2011) Using artificial neural networks to predict the fatigue life of different composite materials including the stress ratio effect. Applied Composite Materials18(4): 297–309.
3.
Al-AssafYEl-KadiH (2001) Fatigue life prediction of unidirectional glass fiber/epoxy composite laminate using neural networks. Composite Structures53(1): 65–71.
4.
ASTM D5229/D5229M:2004 (2004) Standard test method for moisture absorption properties and equilibrium conditioning of polymer matrix composite materials.
AttafB (2013) Designing composite wind turbine blades from cradle to cradle. In: AttafB (ed.) Recent Advances in Composite Materials for Wind Turbine Blades. Hong Kong: The World Academic Publishing, pp. 2–24.
7.
BortolottiP (2012) Carbon glass hybrid materials for wind turbine rotor blades. MS Thesis, Delft University of Technology, Delft.
8.
EkerAAEkerB (2013) General assessment of fiber-reinforced composites selection in wind turbine blades In: AttafB (ed.) Recent Advances in Composite Materials for Wind Turbine Blades. Hong Kong: The World Academic Publishing, pp. 61–77.
9.
HaugenDJ (1998) Fracture of skin-stiffener intersections in composite wind turbine blade structures. MS Thesis, Montana State University, Bozeman, MT.
10.
LadeanRMCairnsDSMandellJ. (2001) Analysis of a composite blade design for the AOC 15/50 wind turbine using a finite element model. Report, Sandia National Laboratories, Albuquerque, NM, May.
11.
LaunikitisMB (1982) Vinyl ester resins. In: LubnG (ed.) Handbook of Composites. New York: Springer, pp. 38–49.
12.
LeeJAAlmondDPHarrisB (1999) The use of neural networks for the prediction of fatigue lives of composite materials. Composites Part A30(1): 1159–1169.
13.
LiM (2000) Temperature and moisture effects on composite materials for wind turbine blades. MS Thesis. Montana State University, Bozeman, MT.
14.
MandellJSamborskyDD (1997) DOE/MSU composite material fatigue database: Test methods, materials and analysis. Report, Sandia National Laboratories, Albuquerque, NM, December.
15.
MandellJFCairnsDS (2003) Prediction of delamination in wind turbine structural details. Journal of Solar Energy Engineering125(4): 522–530.
16.
MandellJSamborskyDDCairnsDS (2002) Fatigue of composite materials and substructures for wind turbine blades. Report, Sandia National Laboratories, Albuquerque, NM, March.
17.
MandellJSamborskyDDLiM. (2000) Selection of fiberglass matrix resins for increased toughness and environmental resistance in wind turbine blades. AIAA Journal57(1): 354–366.
18.
MathWorks (2014) Neural network toolbox, user’s guide R2014b. Available at: www.mathworks.com (accessed 10 October 2014).
19.
MohantyJRVermaBBParhiDRK. (2009) Application of artificial neural network for predicting fatigue crack propagation life of aluminum alloys. Archive of Computational Material Science and Surface Engineering1(3): 133–134.
20.
NijssenRPL (2006) Fatigue life prediction and strength degradation of wind turbine rotor blade composites. PhD Thesis, Delft University, Delft.
21.
OrozcoR (1999) Effects of toughened matrix resins on composite materials for wind turbine blades. MS Thesis, Montana State University, Bozeman, MT.
22.
PleuneTTChopraOK (2000) Using artificial neural networks to predict the fatigue life of carbon and low-alloys steels. Nuclear Engineering and Design197(1): 1–12.
23.
SamborskyDDMandellJCairnsDS (1999) Selection of reinforcing fabrics for wind turbine blades. AIAA Journal24(6): 32–42.
24.
Sandia National Laboratories (SNL) (2014) SNL/MSU/DOE Composite material fatigue database, mechanical properties of composite materials for wind turbine blades. Available at: http://energy.sandia.gov/ (accessed 20 October 2014).
25.
SvozilDKvasniekaVPospichalJ (1997) Introduction to multi-layer feed-forward neural networks. Chemometrics and Intelligent Laboratory Systems39(1): 43–62.
26.
Van DamJJacobsonELinkH. (2003) Wind turbine generators system duration test report for the Atlantic orient 15/50 wind turbine. Report, National Renewable Energy laboratory (NREL), Golden, CO, June.
27.
VassilopoulosAPGeorgopoulosEFDionysopoulosV (2007) Artificial neural networks in spectrum fatigue life prediction of composite materials. International Journal of Fatigue29(1): 20–29.
28.
VenkateshVRackHJ (1999) A neural network approach to elevated temperature creep-fatigue life prediction. International Journal of Fatigue21(3): 225–234.
