We consider the state of stress created by the presence of an edge dislocation at an arbitrary position, in a wedge of arbitrary internal angle. A method for determining the state of stress in the wedge is demonstrarted and verified against finite element method simulations. Furthermore, a Mellin transform is employed to ensure that the free surfaces of the wedge remain traction free along their length.
JohnsonKL.Contact mechanics. Cambridge: Cambridge University Press, 1987.
4.
HeckerMRomanovA.The stress fields of an edge dislocation near a wedge-s haped boundary. Phys Stat Sol (a)1992; 130(1): 91–101.
5.
HeckerMRomanovA. The stress fields of edge dislocations near wedge-shaped boundaries and bonded wedges. In: Fundamental aspects of dislocation interactions. Elsevier, 1993, pp. 411–414.
6.
ChurchmanCKorsunskyAHillsD.The edge dislocation in a three-quarter plane. Part I: influence functions. Eur J Mech A/Solids2006; 25(1): 42–50.
7.
ChurchmanCHillsD.The edge dislocation in a three-quarter plane. Part II: application to an edge crack. Eur J Mech A/Solids2006; 25(3): 389–396.
8.
ChurchmanCHillsD.Slip zone length at the edge of a complete contact. Int J Solids Struct2006; 43(7–8): 2037–2049.
9.
WilliamsM.Stress singularities resulting from various boundary conditions in angular corners of plates in extension. J Appl Mech1952; 19(4): 526–528.
10.
HillsDAKellyPADaiDN, et al. Solution of crack problems: the distributed dislocation technique, vol. 44. Springer Science & Business Media, 2013.
11.
YingzhiLHillsD.Stress intensity factor solutions for kinked surface cracks. J Strain Anal Eng Des1990; 25(1): 21–27.
12.
ErdoganFGuptaGDCookT. Numerical solution of singular integral equations. In: Methods of analysis and solutions of crack problems. Springer, 1973, pp.368–425.
13.
PhilippsAKaruppananSChurchmanC, et al. Crack tip stress intensity factors for a crack emanating from a sharp notch. Eng Fract Mech2008; 75(18): 5134–5139.
