HydeTHWebsterJJFesslerH. Thermal ratchetting of axially loaded tubes operating in the creep range. J Strain Anal Eng1982; 17(4): 243–251.
2.
FesslerHHassellWHydeTH. A model technique for bending strength of tubular joints. J Strain Anal Eng1992; 27(4): 197–210.
3.
HydeTHSunWWilliamsJA. Creep analysis of pressurized circumferential pipe weldments – a review. J Strain Anal Eng2003; 38(1): 1–29.
4.
HydeTHBalhassnASunW. Interpretation of small ring creep tests. J Strain Anal Eng2013; 48(4): 269–278.
5.
YaghiAHHydeTHBeckerAA. Finite Element simulation of welding and residual stresses in a P91 steel pipe incorporating solid-state phase transformation and post-weld heat treatment. J Strain Anal Eng2008; 43(5): 275–293.
6.
LeenSBHydeTRWilliamsEJ. Development of a representative test specimen for frictional contact in spline joint couplings. J Strain Anal Eng2000; 35(6): 521–544.
7.
LeenSBHydeTHRatsimbaCHH. An investigation of the fatigue and fretting performance of a representative aeroengine spline coupling. J Strain Anal Eng2002; 37(6): 565–583.
8.
HydeTHLewisLVFesslerH. Bolting, and loss of contact between cylindrical flat-flanged joints without gaskets. J Strain Anal Eng1988; 23(1): 1–8.
9.
HydeTHSunWWilliamsJA. Creep analysis of pressurised circumferential pipe weldments – a review. J Strain Anal Eng2003; 38(1): 1–29.
10.
HydeTHSunW. A novel, high sensitivity, small specimen creep test. J Strain Anal Eng2009; 44: 171–185.
11.
FesslerHHydeTHSimeAP. The effect of regrinding bearing surfaces on stresses in overlapped crankshafts. J Strain Anal Eng1998; 33(4): 305–315.
