A numerical model capable of dealing with progressive degradation of plain woven composites in a computationally efficient manner is presented in this article. A semi-analytical homogenization method is used to derive effective properties of the composite from the material properties of the constituents. The progressive failure is described using nonlocal continuum damage mechanics where the driving internal variable for the damage is the nonlocal strain. The model was implemented into Abaqus/Explicit, where the failure of a longitudinal tension and an open hole tension specimens were simulated in a multi-scale manner and verified experimentally.
FengZNAllenHGMoySSJ. Theoretical and experimental investigation of progressive failure of woven composite panels. J Compos Mater1999; 33(11): 1030.
5.
KwonYRoachK. Unit-Cell model of 2/2-twill woven fabric composites for multi-scale analysis. CMES: Comput Model Engng Sci2004; 5(1): 63–72.
6.
Rudov-ClarkSMouritzA. Tensile fatigue properties of a 3D orthogonal woven composite. Comp Part A: Appl Sci Mfg2008; 39(6): 1018–1024.
7.
ChungPWTammaKK. Woven fabric composites-developments in engineering bounds, homogenization and applications. Int J Numer Methods Engng1999; 45(12): 1757–1790.
8.
TabieiAAminjikaraiSB. A strain-rate dependent micro-mechanical model with progressive post-failure behavior for predicting impact response of unidirectional composite laminates. Comp Struct2009; 88(1): 65–82.
9.
WenPHAliabadiMH. Mesh-free micromechanical model for woven fabric composite elastic moduli. J Multiscale Modelling2009; 1(2): 303–319.
10.
WenPHAliabadiMH. Damage mechanics analysis of plain woven fabric composite micro-mechanical model for mesh-free simulations. J Comp Materin press.
11.
LiLWenPHAliabadiMH. Meshfree modeling and homogenization of 3D orthogonal woven composites. Comp Sci Technol2011; 71: 1777–1788.
12.
BogdanovichA. Multi-scale modeling, stress and failure analyses of 3-D woven composites. J Mater Sci2006; 41(20): 6547–6590.
PaleyMAboudiJ. Micromechanical analysis of composites by the generalized cells model. Mech Mater1992; 14(2): 127–139.
15.
TabieiAJiangY. Woven fabric composite material model with material nonlinearity for nonlinear finite element simulation. Int J Solids Struct1999; 36(18): 2757–2772.
16.
BednarcykBA. Discussion of’ Woven fabric composite material model with material non-linearity for non-linear finite element simulation’ by Tabiei and Jiang (Int J Solids Struct 1999; 36: 2757–2771). Int J Solids Struct2001; 38(46): 8585–8588.
17.
BarberoELonettiPSikkilK. Finite element continuum damage modeling of plain weave reinforced composites. Composites Part B2006; 37(2-3): 137–147.
18.
TabieiA.IvanovI. Materially and geometrically non-linear woven composite micro-mechanical model with failure for finite element simulations. Int J Nonlinear Mech2004; 39(2): 175–188.
19.
HashinZ. Failure criteria for unidirectional fiber composites. ASME Trans J Appl Mech1980; 47: 329–334.
20.
JirasekMRolshovenSGrasslP. Size effect on fracture energy induced by non-locality. Int J Numer Analyt Methods Geomech2004; 28(7–8): 653–670.
LittellJDRuggeriCRGoldbergRK. Measurement of epoxy resin tension, compression, and shear stress–strain curves over a wide range of strain rates using small test specimens. J Aerospace Engng2008; 21: 162.
23.
MazarsJ. A description of micro-and macroscale damage of concrete structures. Engng Fract Mech1986; 25(5/6): 729–737.
