In 1971, Edward Keller proposed the velocity-reversal hypothesis to describe observations where near-bed velocities in pools increased at a faster rate than in riffles. The reversal in conditions was used to explain the maintenance of pool-riffle sequences. The hypothesis continues to draw interest, and research shows that velocity reversals occur in limited conditions, but average cross-sectional velocities in pools do not universally exceed those in riffles at near-bankfull flows. A consensus is now beginning to form that flow convergence in pools is common at high flow and helps to form an isolated region of jet flow with high velocities that maintains the characteristics of the pool-riffle sequence.
Andrews ED ( 1979) Scour and fill in a stream channel, East Fork River, Western Wyoming. US Geological Survey Professional Paper 1117. Washington, DC: US Government Printing Office.
2.
Andrews ED ( 1982) Bank stability and channel width adjustments, East Fork River, Wyoming. Water Resources Research18: 1184-1192.
3.
Bhowmik NG, Demissie M. ( 1982) Bed material sorting in pools and riffles. Journal of the Hydraulic Division, ASCE108: 1227-1231.
4.
Booker DJ, Sear DA, and Payne AJ ( 2001) Modelling three-dimensional flow structures and patterns of boundary shear stress in a natural pool-riffle sequence. Earth Surface Processes and Landforms26: 553-576.
5.
Buffington JM, Lisle TE, Woodsmith RD, et al. (2002) Controls on the size and occurrence of pools in coarse-grained forest rivers. River Research and Applications18: 507-531.
6.
Caamaño D., Goodwin P., Buffington JM, et al. (2009) Unifying criterion for the velocity reversal hypothesis in gravel-bed rivers. Journal of Hydraulic Engineering135: 66-70.
7.
Cao Z., Carling PA, and Oakley R. ( 2003) Flow reversal over a natural pool-riffle sequence: A computational study. Earth Surface Processes and Landforms28: 689-705.
8.
Carling PA ( 1991) An appraisal of the velocity-reversal hypothesis for stable pool-riffle sequences in the River Severn, England. Earth Surface Processes and Landforms16: 19-31.
9.
Carling PA, Wood N. ( 1994) Simulation of flow over pool-riffle topography: A consideration of the velocity-reversal hypothesis. Earth Surface Processes and Landforms19: 319-332.
10.
Carling PA, Orr HG, and Glaister MS ( 1994) Preliminary observations and significance of dead zone flow structures for solute and fine particle dynamics. In: Beven KJ, Chatwin PC , and Millbank JH (eds) Mixing and Transport in the Environment. London: Wiley, 139-157.
11.
Cherkauer DS ( 1973) Minimization of power expenditure in a riffle-pool alluvial channel. Water Resources Research9: 1613-1628.
12.
Clifford NJ ( 1993) Differential bed sedimentology and the maintenance of a riffle-pool sequence. Catena20: 447-468.
13.
Clifford NJ, Richards KS ( 1992) The reversal hypothesis and the maintenance of riffle-pool sequences. In: Carling PA, Petts GE (eds) Lowland Floodplain Rivers: Geomorphological Perspectives. Chichester: Wiley, 43-70.
14.
Dietrich WE, Smith JD, and Dunne T. ( 1979) Flow and sediment transport in a sand bedded meander . Journal of Geology87: 305-315.
15.
Dolling RK ( 1968) Occurrence of pools and riffles: An element in the quasi-equilibrium state of river channels. Ontario Geographer2: 3-11.
16.
Emmett WW, Leopold LB, and Myrick RM ( 1983) Some characteristics of fluvial processes in rivers . In: Proceedings of the Second International Symposium on River Sedimentation, Nanjing, China, 730-754.
17.
Gilbert GK ( 1914) Transportation of debris by running water. US Geological Survey Professional Paper 86. Washington, DC: US Government Printing Office.
18.
Harrison LR, Keller EA ( 2007) Modeling forced pool-riffle hydraulics in a boulder-bed stream, southern California. Geomorphology83: 232-248.
19.
Heritage GL, Milan DL ( 2004) A conceptual model of the role of excess energy in the maintenance of a riffle-pool sequence. Catena58: 235-257.
20.
Jackson WL, Beschta RL ( 1982) A model of two-phase bedload transport in an Oregon coast range stream. Earth Surface Processes and Landforms7: 517-27.
21.
Jansen JD, Brierley GJ ( 2004) Pool-fills: a window to palaeoflood history and response in bedrock-confined rivers. Sedimentology51: 901-925.
22.
Keller EA ( 1971) Areal sorting of bed-load material: The hypothesis of velocity reversal. Geological Society of America Bulletin82: 753-56.
23.
Keller EA ( 1999) The transportation of debris by running water, by Grove Karl Gilbert. In: Moorer EM, Sloan D, and Stout DL (eds) Classic Cordilleran Concepts: A View From California. Special Paper 338. Boulder, CO: Geological Society of America, 253-256.
24.
Keller EA, Florsheim JL ( 1993) Velocity-reversal hypothesis: A model approach . Earth Surface Processes and Landforms18: 733-740.
25.
Kieffer SW ( 1989) Geologic nozzles. Reviews of Geophysics27: 3-38.
26.
Lisle TE ( 1979) A sorting mechanism for a riffle-pool sequence: Summary . Geological Society of America Bulletin90: 616-617.
27.
Lisle TE ( 1986) Stabilization of a gravel channel by large streamside obstructions and bedrock bends, Jacoby Creek, northwest California. Geological Society of America Bulletin97: 999-1011.
28.
Lisle TE, Hilton S. ( 1992) The volume of fine sediment in pools: An index of sediment supply in gravel-bed streams. Water Resources Bulletin28: 371-383.
29.
MacVicar BJ, Roy AG ( 2007) Hydrodynamics of a forced riffle pool in a gravel bed river: 1. Mean velocity and turbulence intensity. Water Resources Research43: W12401.
30.
MacWilliams ML Jr, Wheaton JM, Pasternack GB, et al. (2006) Flow convergence routing hypothesis for pool-riffle maintenance in alluvial rivers. Water Resources Research42, W10427.
31.
Milan DJ, Heritage GL, Large ARG, et al. (2001) Stage dependent variability in tractive force distribution through a riffle-pool sequence. Catena44(2): 85-109.
32.
Miller AJ ( 1994) Debris-fan constrictions and flood hydraulics in river canyons: Some implications from two-dimensional flow modeling. Earth Surface Processes and Landforms19: 681-697.
33.
Montgomery DR, Buffington JM, Smith RD, et al. (1995) Pool spacing in forest channels. Water Resources Research31: 1097-1105.
34.
O’Connor JE, Webb RH, and Baker VR ( 1986) Paleohydrology of pool-and-riffle pattern development: Boulder Creek, Utah. Geological Society of America Bulletin97: 410-420.
35.
Pasternack GB, Bounrisavong MK, and Parikh KK ( 2008) Backwater control on riffle-pool hydraulics, fish habitat quality, and sediment transport regime in gravel-bed rivers. Journal of Hydrology357: 12-139.
36.
Rathburn S., Wohl EE ( 2003) Predicting fine sediment dynamics along a pool-riffle mountain channel. Geomorphology55: 111-124.
37.
Richards KS ( 1978) Simulation of flow geometry in a riffle-pool stream . Earth Surface Processes and Landforms3: 345-354.
38.
Robert A. ( 1997) Characteristics of velocity profiles along riffle-pool sequences and estimates of bed shear stress. Geomorphology19: 89-98.
39.
Sawyer AM, Pasternack GB, Moir HJ, et al. (2009) Riffle-pool maintenance and flow convergence routing on a large gravel-bed river. Geomorphology114: 143-160.
40.
Sear DA ( 1996) Sediment transport processes in pool-riffle sequences . Earth Surface Processes and Landforms21: 241-262.
41.
Schmidt JC ( 1990) Recirculating flow and sedimentation in the Colorado River in Grand Canyon, Arizona. Journal of Geology98: 709-724.
42.
Schmidt JC, Rubin DM, and Ikeda H. ( 1993) Flume simulation of recirculating flow and sedimentation . Water Resources Research29: 2925-2939.
43.
Teleki NG ( 1972) Areal sorting of bed-load material: The hypothesis of velocity reversal: Discussion. Geological Society of America Bulletin83: 911-914.
44.
Thompson DM ( 2001) Random controls on semi-rhythmic spacing of pools and riffles in constriction-dominated rivers. Earth Surface Processes and Landforms26: 1195-1212.
45.
Thompson DM, Wohl EE (2009) The linkage between velocity patterns and sediment entrainment in a pool-riffle unit. Earth Surface Processes and Landforms34: 177- 192.
46.
Thompson DM, Nelson JM, and Wohl EE ( 1998) Interactions between pool geometry and hydraulics . Water Resources Research34: 3673-3681.
47.
Thompson DM, Wohl EE, and Jarrett RD ( 1996) A revised velocity-reversal and sediment-sorting model for a high-gradient, pool-riffle stream. Physical Geography17: 142-156.
48.
Thompson DM, Wohl EE, and Jarrett RD ( 1999) Velocity reversals and sediment sorting in pools and riffles controlled by channel constrictions. Geomorphology27: 229-241.
49.
Wilkinson SN, Keller RJ, and Rutherfurd ID ( 2004) Phase-shifts in shear stress as an explanation for the maintenance of pool-riffle sequences. Earth Surface Processes and Landforms29: 737-753.
50.
Wohl EE ( 2007) Channel-unit hydraulics on a pool-riffle channel . Physical Geography28: 233-248.
51.
Yang CT ( 1971) Formation of riffles and pools. Water Resource Research7: 1567-74.
