The Fractal Dimensions of Carbon-Black-Filled Polymers and Elastomers. Part 1. Materials and Methods of Investigation,and Morphology

Abstract

Methods for preparing specimens and for processing the results obtained are described. Carbon black of grades T1 and KhS-72, monodispersed polystyrene (molecular weight 200 kDa), polyethylene, polybutadiene rubber, polyisoprene rubber, styrene butadiene elastomer, and butyl rubber were investigated. Two methods were used to prepare filled specimens. In the first case (model systems), the filler and polymer were mixed via a 1–5% solution of polystyrene in toluene. The carbon black content in the suspensions was varied in the range 1–60 wt%. After mixing, the specimens were subjected to ultrasound treatment on a UZDM-2T disperser (44 kHz) for ~10 min. In the second case, sulphur vulcanisates were obtained by the standard procedure. The morphology was studied by transmission electron microscopy (EM-301 electron microscope, Japan) using thin films or etching in high-frequency oxygen discharge plasma on a vacuum reactor (Edwards, UK). A procedure for processing electron micrographs with the aim of obtaining information about local and global fractal dimensions of particle aggregates is described.

Keywords

filled polymers dispersions ultrasound treatment structure electron microscopy fractal dimensions

Get full access to this article

View all access options for this article.

References

Babaevskii

P.G.

(ed.), Fillers for Composite Materials. Khimiya, Moscow, 736 pp. (1981).

Kraus

, The Reinforcement of Elastomers. Mir, Moscow, 218 pp. (1968).

Rabenyuk

E.V.

, The effect of small concentrations of carbon nanotubes on electric dipole relaxation in a polyurethane elastomer. Zh. Fiz. Khim., 88(3): 433 (2015).

Khozin

V.G.

, The Reinforcement of Epoxy Polymers. PIK Dom Pechati, Kazan, 446 pp. (2004).

Shpak

A.P.

, The diagnostics of nanosystems, in Colloid Chemical Principles of Nanoscience. Akademperiodika, Kiev, 311 pp. (2005).

Lipatov

Yu.S.

, The Physical Chemistry of Filled Polymers. Khimiya, Moscow, 304 pp. (1977).

Shtakel'berg

D.I.

, and Sychev

M.M.

, Self-Organisation in Dispersed Systems. Zinatne, Riga, 175 pp. (1990).

Kirpatrik

, The Theory and Properties of Disordered Materials. Mir, Moscow, 296 pp. (1977).

Chalykh

A.E.

, The structure and fractal dimensions of aggregates of filler particles in polymers, in The Structure and Dynamics of Molecular Systems, Collection No. 23, p. 23 (2016).

10.

Chalykh

A.E.

, Methods for determining the fractal dimensions of dispersed polymer systems. Vestn. Kazansk. Tekhnol. Univ., 18: 18 (2016).

11.

Gorshkova

O.V.

, A quantitative description of the structure of heterogeneous polymer systems with the use of fractal analysis. Cand. Chem. Sci. Dissertation, Institute of Physical Chemistry and Electrochemistry, Russian Acad. Sci. (IFKhE, RAN), Moscow, 204 pp. (2010).

12.

Jurgens

, The language of fractals. V Mire Nauki, (10): 36 (1990).

13.

Potapov

A.A.

, The Latest Methods for Image Processing. Fizmatinlit, Moscow, 496 pp. (2008).

14.

Ivanova

V.S.

, Synergy and Fractals in Materials Science. Nauka, Moscow, 243 pp. (1994).

15.

Dogadkin

B.A.

, Elastomer Chemistry. Khimiya, Moscow, 376 pp. (1981).

16.

Marikhin

V.A.

, and Myasnikova

L.P.

, The Supermolecular Structure of Polymers. Khimiya, Leningrad, 240 pp. (1977).

17.

Zhuravlev

V.F.

, The Fundamentals of Theoretical Mechanics. Nauka, Moscow, 154 pp. (2001).