GorokhovskiiA.V., Composite materials.Saratov State Technical University, Saratov, 73 pp. (2008).
4.
SergeevG.B., Nanochemistry.Moscow State University, Moscow, 345 pp. (2003).
5.
KakhramanovN.T., and KakhramandyYu.N., Nanotechnology in the field of materials science. Uchenye Zapiski. Nats. Aviats. Akad. Azerbaidzhan, 11(3): 7–15 (2009).
6.
IvanchevS.S., and OzerinA.N., Nanostructures in polymer systems. Vys. Soed., 48(8B): 1541–1544(2006).
KodolovV.I., The activity of nanostructures and its appearance in nanoreactors of polymer matrices and in active media. Khim. Fiz. Mezoskopiya, 10(4): 448–460 (2010).
11.
KodolovV.I., The mechanism of the effect of nanostructures on structurally changing media in the formation of ‘smart’ composites. Nanotekhnika, 7(3): 27–35 (2006).
12.
KodolovV.I., Prospects of the use of nanostructures and nanosystems in the creation of composites with predictable behaviour, in Space Challenges in the 21st Century. Vol. 3. Novel Materials and Technologies for Space Rockets and Space Development.Torus Press, Moscow, pp. 201–205(2007).
13.
ZhirikovaZ.M., Predicting the degree of reinforcement for ‘polymer/carbon nanotube’ nanocomposites. Plast. Massy, (7), pp. 29–31 (2013).
14.
MikitaevA.K., Polymer Nanocomposites: a Diversity of Structural Forms and Applications.Nauka, Moscow, 278 pp. (2009).
15.
ShengN., Multiscale micromechanical modeling of polymer/clay nanocomposites and the effective clay particle. Polymer, 45(2): 487–506 (2004).
16.
RakovE.G., The production of fine carbon nanotubes by catalytic pyrolysis on a support. Uspekhi Khim., 76(1): 3–19 (2007).
17.
ShitovD. Yu.,, Composite materials based on polypropylene with carbon nanofillers. Plast. Massy, (3): 29–32 (2013).
18.
HanningR, and HillA., Nanostructured Materials.Tekhnosfera, Moscow, 488 pp. (2009).
19.
Ol'khovA.A., The structural parameters of a polymer composite material based on polyethylene and nanocrystalline silicon. Plast. Massy, (10): 6–8 (2013).
20.
Simonov-Emel'yanovI.D., and KuleznevV.N., The Principles of Creating Composite Materials.MIKhM, Moscow, 85 pp. (1986).
21.
BerlinA.A., The Principles of Creating Polymer Composite Materials.Khimiya, Moscow, 240 pp. (1990).
22.
ProkopovN.I., The production of polymer composite microspheres with zinc oxide nanoparticles on the surface. Plast. Massy, 27–32 (2013).
23.
ShiryakinaYu.M., The synthesis of polystyrene microspheres in the presence of zinc oxide nanoparticles. Plast. Massy, (9): 60–64 (2011).
24.
PomogailoA.D., Metal Nanoparticles in Polymers.Khimiya, Moscow, 672 pp. (2000).
PetryukI.P., The influence of the parameters of the disperse structure on the content of interphase layer in filled polymers. Plast. Massy, (5-6): 7–13 (2014).
30.
Simonov-Emel'yanovI.D., Generalised parameters of the disperse structure of filled polymers. Plast. Massy, (1): 19–22 (1989).
31.
VlasovS.V., The Principles of Plastics Processing Technology.Khimiya, Moscow, 600 pp. (2004).
32.
GaidadinA.N., The formation of the interphase layer in blended thermoplastic elastomers based on olefin polymers. Plast. Massy, (7): 9–12 (2011).
33.
GordienkoV.P., and Sal'nikovV.G., The effect of silicon dioxide of different nature on the structure and properties of linear polyethylene during UV irradiation. Plast. Massy, (5-6): 9–13 (2014).
34.
GordienkoV.P., and Sal'nikovV.G., The effects of UV irradiation on the structure and properties at elevated temperature of a crystallising system: linear polyethylene–nanosized silicon dioxide. Plast. Massy, (6): 5–10 (2013).
35.
AkutinM.S., The mechanism of interaction of structure-forming agents with crystalline polymers. Plast. Massy, (12): 32–33 (1966).
36.
RybalkoV.P., The effect of nanofillers on the physicomechanical properties of organosilicon plastic foams. Plast. Massy, (5): 57–60 (2012).
37.
MikitaevA.K., Polymer Nanocomposites.Nauka, Moscow, 278 pp. (2009).
38.
Simonov-Emel'yanovI.D., The structure formation, compositions, and properties of particulate-filled polymer nanocomposites. Plast. Massy, (6): 7–13 (2012).
39.
Simonov-Emel'yanovI.D., The main characteristics of fillers of plastics, in Fillers of Polymeric Materials.MDNTP, Moscow, pp. 147–157 (1983).
40.
ZorinI.M., The production of composite material based on ultrahigh-molecular-weight polyethylene and modified nanodispersed fine colloidal silica. Plast. Massy, (9): 40–42 (2012).
41.
XanthosM. (ed.), Functional Fillers for Plastics.Wiley, Weinheim, Germany, 451 pp. (2006).
PaninS.V., The influence of mechanical activation of the polymer binder on the friction mechanical properties of ultrahigh-molecular-weight polyethylene. Trenie Iznos, 31(2): 13–20 (2010).
44.
BashorovM.T., Polymers as natural nanocomposites: the mechanism of reinforcement. Plast. Massy, (12): 32–34 (2010).
45.
RybinV.V., Nanomaterials of structural and functional class. Vopr. Materialoved., 45(1): 169–178 (2006).
46.
MalamatovA.Kh., The Mechanism of Strengthening of Polymer Nanocomposites.Russian Chemico-Technological University, Moscow, 240 pp. (2006).
47.
KozlovG.V., and NovikovV.U., A cluster model of the amorphous state of polymers. Uspekhi Fiz. Nauk, 171(7): 717–764 (2001).
48.
KrasnovA.P., Nanofilled polymer systems for biomedical tribology. Plast. Massy, (10): 43–48 (2010).
49.
BriscoeB.J., and SinhaS.K., Tribological applications of polymers and their composites: past, present, and future prospects, in Tribology and Interface Engineering Series, Vol. 55, Tribology of Polymeric Nanocomposites, ed. by FriedrichK., and SchlarbA.K.Elsevier, Amsterdam, The Netherlands, pp. 1–14 (2008).
50.
PesetskiiS.S., Tribotechnical properties of nanocomposites produced by the dispersion of fillers in polymer melts. Trenie Iznos, 28(5): 500–524 (2007).
51.
OkhlopkovaA.A., Plastics Filled with Ultradisperse Inorganic Compounds.IMMS, Belarus Acad. Sci., Gomel, Belarus, 257 pp. (1999).
52.
KrasnovA.P., The systematisation of nanofillers of polymer composites. Trenie Iznos, 31(1): 48–53.
53.
NaumkinA.V., Carbon dioxide in the surface layers of ultrahigh molecular weight polyethylene. Dokl. Fiz. Khim., 419(5): 641–645 (2008).
54.
ZhubanovB.A., Polymeric Materials with Therapeutic Properties.Kompleks, Almaty, Kazakhstan, 217 pp. (2000).
55.
YunusovKh.E., The structure and properties of biodegradable carboxymethyl cellulose films containing silver nanoparticles. Vys. Soed., 56A(3): 276–281 (2014).
56.
BogdanovaL.M., The mechanical properties of epoxy composites based on silver nanoparticles synthesised in situ. Vys. Soed., 56A(3): 289–295 (2014).
57.
NurievM.A., The electret properties of nanostructured films of polytetrafluoroethylene. Plast. Massy, (10): 7–9 (2012).
58.
KuznetsovA.E., and RychkovD.A., The electret effect in non-polar polymers with element-containing nanocomplexes on the surface. VI All-Russian Intercollegiate Conference of Young Scientists, St Petersburg, Russia, Issue 3, pp. 82–87 (2009).
59.
RychkovA.A., The effect of elecret charge stabilisation in tetrafluoroethylene films with a chemically modified surface. Izv. RGPU im. A.I. Gertsena, 26(7): 137–142 (2007).
60.
KakhramanovN.T., and BagirovaSh.R., The properties of nanocomposites based on styrene plastics. Plast. Massy, (1-2) (2015).
61.
AlievaR.V., Metal–polymer nanocomposites based on different polyolefin matrices. Perspekt. Mater., Special Issue, 6(2): 207–212 (2008).
62.
AlievaR.V., Nanocomposites based on polymerisation-filled polyethylene with methylalumoxane products. VII Baku International Mamedaliev Conference on Petroleum Chemistry (marking the 80th Anniversary of the Institute of Petrochemical Processes), Azerbaidzhan Academy of Sciences, Baku, pp. 229–230 (2009).
63.
AlievaR.V., Polymerisation products of ethylene and polymerisation-filled nanocomposites produced in the presence of new titanium phenolate precursors and different cocatalysts. Plast. Massy, (12): 27–32 (2010).
64.
KakhramanovN.T., and AbbasovA.M., The Chemical Modification of Polymers.Elm, Baku, 334 pp. (2005).
65.
LipatovYu.S., The Physical Chemistry of Filled Polymers.304 pp. (1977).
66.
KravchenkoT.P., Scientific and technical problems of producing composite materials based on structural thermoplastics. Plast. Massy, (10): 32–37 (2010).
67.
SergeevG.B., Nanochemistry.Moscow State University, Moscow, 345 pp. (2003).
68.
AlievaR.V., Azerbaidzhan Patent I 2011 0058, from 28.06.2011.
69.
KirichenkoE.A., The properties of filled ABS copolymers. Plast. Massy, (4): 60–64 (1984).
70.
ErmakovS.N., and KravchenkoT.P., Molecular polymer–polymer composites. Certain aspects of production. Plast. Massy, (12): 21–25 (2003).
71.
KakhramanovN.T., and AzizovA.G., The influence of the injection moulding regime on the physicomechanical properties of nanocomposites based on styrene plastics. Plast. Massy, (1-2) (2015).
72.
KoroteevA.S., and RizakhanovR.N., Nanotechnologies in space engineering. Polet, (8): 9–14 (2008).
