KaminskyW.Recycling of polymeric materials by pyrolysis. Makromol. Chem. Macromol. Symp., 48(1): 381 (1991).
2.
KaminskyW., and MennerichC.Pyrolysis of synthetic tire rubber in a fluidised-bed reactor to yield 1,3-butadiene, styrene and carbon black. J. Anal. Appl. Phys., 58: 803 (2001).
3.
KaminskyW.Feedstock recycling of synthetic and natural rubber by pyrolysis in a fluidized bed. J. Anal. Appl. Phys., 85(1–2): 334 (2009).
4.
Fernandez-BerridiM.Bernicot pyrolysis – FTIR and TGA techniques as tools in the characterization of blends of natural rubber and SBR. Thermochim. Acta, 444(1): 65 (2006).
5.
BeckW.H.Pyrolysis studies of polymeric materials used as binders in composite propellants: a review. Combust. Flame, 70(2): 171 (1987).
6.
MartinezJ.D.Waste tyre pyrolysis: a review. Renew. Sustain. Energy Rev., 23: 179 (2013).
7.
BowleyB.The determination of the composition of polymeric composites using TG-FTIR. Thermochim. Acta, 200: 309 (1992).
8.
AntoniouN., and ZabaniotouA.Features of an efficient and environmentally attractive used tyres pyrolysis with energy and material recovery. Renew. Sustain. Energy Rev., 20: 539 (2013).
9.
LouJ.C.Incineration of styrene–butadiene rubber: the influence of heating rate and oxygen content on gas products formation. J. Hazard. Mater., 58(1–3): 165 (1998).
10.
ChoiS.-S.Characteristics of the pyrolysis patterns of styrene–butadiene rubbers with differing microstructures. J. Anal. Appl. Pyrol., 62(2): 319 (2002).
11.
WilliamsP.T., and BeslerS.Pyrolysis– thermogravimetric analysis of tyres and tyre components. Fuel, 74(9): 1277 (1995).
LahB.Pyrolysis of natural, butadiene, styrene–butadiene rubber and tyre components: modelling kinetics and transport phenomena at different heating rates and formulations. Chem. Eng. Sci., 87: 1 (2013).
14.
KwonE., and CastaldiM.J.Investigation of mechanisms of polycyclic aromatic hydrocarbons (PAHs) initiated from the thermal degradation of styrene butadiene rubber (SBR) in N2 atmosphere. Environ. Sci. Technol., 42(6): 2175 (2008).
15.
ChoiS.-S.Correlation of crosslink density with pyrolysis pattern of natural rubber vulcanizates with efficient vulcanizing cure system. J. Anal. Appl. Pyrol., 52(1): 105 (1999).
16.
ChoiS.-S.Characterization of bound rubber of filled styrene–butadiene rubber compounds using pyrolysis–gas chromatography. J. Anal. Appl. Pyrol., 55(2): 161 (2000).
17.
ChoiS.-S.Total utilization of waste tire rubber through pyrolysis to obtain oils and (CO2) activation of pyrolysis char. Fuel Process. Technol., 123: 57 (2014).
18.
ZabaniotouA.A., and StavropoulosG.Pyrolysis of used automobile tires and residual char utilization. J. Anal. Appl. Pyrol., 70(2): 711 (2003).
19.
BouvierJ.M., and GelusM.Pyrolysis of rubber wastes in heavy oils and use of the products. Resour. Conserv., 12(2): 77 (1986).
20.
ChenK.S.Kinetics of thermal decomposition of styrene–butadiene rubber at low heating rates in nitrogen and oxygen. Combust. Flame, 108(4): 408 (1997).
21.
ThomasT.H., and KendrickT.C.Thermal analysis of polydimethylsiloxnaes. I. Thermal degradation in controlled atmospheres. J. Polym. Sci. Part A-2, (7): 537 (1969).
