Viscometry and dynamic mechanical analysis were used to investigate the curing of a filled phenol–urethane composite.
Get full access to this article
View all access options for this article.
References
1.
NenakhovS.A., and KorochkinaN.N.Experimental methods for investigating adhesion in polymer–metal systems. Review Information Series Anticorrosion Protection.NIITEKhIM, Moscow, pp. 1–78 (1988).
2.
FreidinA.S.The Strength and Durability of Adhesive Bonds.Khimiya, Moscow, 272 pp. (1981).
3.
NuzhdinaYu. A.Spectroscopic study of the nature of packing of macromolecules in polymer coatings formed on the surface of a solid. Composite Polymeric Materials, Intercollegiate Symp., No. 24, pp. 11–14 (1985).
4.
BraunE.V.The influence of the phase boundary on the strength properties of a metal– polymer system. Plastmassy, (1): 29–30 (1983).
5.
RostiashviliV.G.The Glass Transition of Polymers.Khimiya, Leningrad, 192 pp. (1987).
6.
FreidinA.S.The Strength and Durability of Adhesive Bonds.Khimiya, Moscow, 272 pp. (1981).
7.
MansonJ., and SperlingL.Polymer Adhesives and Composites.Khimiya, Moscow, 440 pp. (1979).
8.
LipatovYu. S.The influence of the solid surface on the process of formation of epoxy adhesive. Dokl. Akad. SSSR, 27(1): 118–121 (1987).
9.
SemenovichG.M.Investigation of the structure of boundary layers in the rubber–epoxy resin–ammonium chloride system. Vys. Soed., A20(10): 2375–2380 (1979).
10.
VeselovskiiR.A.Investigation of the possibility of controlling the properties of boundary layers of cold-curing epoxy polymers. Vys. Soed., A27(3): 497–500 (1985).
11.
LipatovYu. S.The Physical Chemistry of Filled Polymers.Khimiya, Moscow, 312 pp. (1977).
12.
GolovkoL. I., and RumyantsevL. Yu.The influence of the nature of the fillers on the process of polyester urethane formation. Vys. Soed., B28(4): 303 (1986).
13.
ApicellaA.Rheological behaviour of a commercial FGDDM–DDS based epoxy matrix during the isothermal cure. Rheol. Acta, 23(3): 291–296 (1984).
