An analysis has been made of the effect of different additives on the properties of starch-based polymer composites. The authors describe the principal stages of the technology for producing such materials, which can be used for creating new ecologically safe biodegradable materials for the manufacture of films, packaging, and different products of short-time use. Their main trade names and manufacturers are given.
Get full access to this article
View all access options for this article.
References
1.
VlasovaG., and MakarevichA., Biodegradable plastics in the packaging industry. Tekhnol. Pererab. Upakovki, (8) (2001).
2.
JanssenL., and MoscickiL., Thermoplastic Starch. A Green Material for Various Industries.Wiley-VCH, Weinheim, Germany, 242 pp. (2009).
3.
ShahA.A., Biological degradation of plastics: a comprehensive review. Biotechnol. Adv., (26): 246–265 (2009).
4.
SwiftG., in Biodegradable Plastics and Polymers, ed. by DoiY., and FukudaK.Elsevier, Amsterdam, The Netherlands, p. 228 (1994).
5.
The Production of Biopolymers as a Way to Solve Problems of the Ecology and the Agroindustrial Complex: Analytical Review.NTsNTI, Almaty, Kazakhstan, 200 pp. (2009).
6.
BoikoV., and KobrinaL., Renewable raw material – polymers of the future. Polimery – Den'gi, 25(5): 58–63 (2007).
7.
SmirnovV.F., Biodegradation of chitosan under the influence of microscopic fungi. Proc. 5th Int. Conf. on New Prospects in the Investigation of Chitin and Chitosan, Moscow, pp. 282–283 (1999).
8.
SlivkinA.I., Chitosan as a polymer matrix for the immobilisation of drugs with antitubercular activity. Voprosy Biologicheskoi, Meditsinskoi i Farmatsevticheskoi Khimii, (5): 36–39 (2009).
9.
KnunyantsN.N. (ed.), Chemical Encyclopaedia. Vol. 1.Sovetskaya Entsiklopediya, Moscow, 623 pp. (1988).
10.
VlasovaG., and MakarevichA., Ecological polymer. Pakkograff, (4): 12–14 (2002).
11.
GulyukN.G., Starch and Starch Products, ed. by GulyukN.G.Agropromizdat, Moscow, 240 pp. (1985).
12.
OblezovaT.P., The processing of byproducts of potato starch production.AgroNIITEIPP, Moscow, No. 7, 24 pp. (1991).
13.
DulinaL., Course on the Zero Waste! principle. Biopolymers: a clean solution to dirty problems. Polimery – Den'gi, (2): 10–13 (2005).
14.
RybkinaS.P., Principal trends in the field of creating biodegradable thermoplastics. Plast. Massy, (10): 47–54 (2008).
15.
KrochtaJ.M., and De Mulder-JohnstonL.C., Biodegradable polymers from agricultural products. Agricultural Materials as Renewable Resources: Nonfood and Industrial Applications, ed. by FullerG.American Chemical Society, Washington, D.C., pp. 120–140 (1996).
16.
VromanI., and TighzertL., Biodegradable polymers. Materials, (2): 307–344 (2009).
17.
ShahA.A., Biological degradation of plastics: a comprehensive review. Biotechnol. Adv., (26): 246–265 (2009).
18.
FullerG. (eds), Agricultural Materials as Renewable Resources: Nonfood and Industrial Applications.American Chemical Society, Washington, D.C., 268 pp. (1996).
19.
ShogrenR.I.Starch: properties and materials applications. Biopolymers from Renewable Resources, ed. by KaplanD.L.Springer, Berlin, Germany, 417 pp. (1998).
20.
BeachE.D., Biopolymers: an engineering and economic assessment of an emerging industry. Adv. Sol. Energy, (9): 383–457 (1994).
21.
ZhushmanA.I., Innovations in the production of modified starches.AgroNIITEIPP, Moscow, No. 1, 32 pp. (1990).
22.
TyurevE.P., and ZverevS.V., Methods for producing modified starches and their application.AgroNIITEIPP, Moscow, No. 1, 24 pp. (1993).
WeberC.J. (ed.), Biobased Packaging for the Food Industry: Status and Perspectives.Department of Dairy and Food Science, Royal Veterinary and Agricultural University (KVL), Frederiksberg, Denmark (2000).
31.
SvegmarkK., Potato starch dispersions: structure and rheology.Chalmers Biblioteks ReproService, Gothenburg, Sweden, 45 pp. (1992).
32.
MyllarinenP., The crystallinity of amylose and amylpectin films. Carbohydr. Polym., (48): 41–48 (2002).
33.
Van SoestJ.J.G., Crystallinity in starch bioplastics. Ind. Crops Prod., (5): 11–22 (1996).
34.
Van SoestJ.J.G., The influence of starch molecular mass on the properties of extruded thermoplastic starch. Polymer, (37): 3543–3552 (1996).
35.
TabiT., and KovacsJ.G., Examination of injection moulded thermoplastic maize starch. eXPRESS Polym. Lett., 1(12): 804–809 (2007).
36.
Van SoestJ.J.G., Mechanical properties of thermoplastic waxy maize starch. J. Appl. Polym. Sci., 61(11): 1927–1937 (1996).
37.
ShiR., Ageing of soft thermoplastic starch with high glycerol content. J. Appl. Polym. Sci., 103: 574–586 (2007).
38.
TaljaR.A., Preparation and characterisation of potato starch films plasticised with polyols. Academic Dissertation, University of Helsinki, Helsinki, Finland, 57 pp. (2007).
39.
TaljaR.A., Effect of various polyols and polyol contents on physical properties of potato starch-based films. Carbohydr. Polym., (3): 288–295 (2007).
40.
TaljaR.A., Effects of type and content of binary polyol mixtures on physical and mechanical properties of starch-based edible films. Carbohydr. Polym., (2): 269–276 (2008).
41.
Formamide as a plasticiser for thermoplastic starch. Khim. Vys. Soed., (4) (2006).
42.
MaX., and YuJ., Formamide as the plasticizer for thermoplastic starch. J. Appl. Polym. Sci., (7): 1769–1773 (2004).
43.
HuiJ., A novel plasticizer for the preparation of thermoplastic starch. Chin. Chem. Lett., 1(1): 133–136 (2006).
44.
FominV.A., and GuzeevV.V., Biodegradable polymers. Khim. Zhizn', (7): 8–11 (2005).
45.
JangW.Y., Thermal properties and morphology of biodegradable PLA/starch compatibilized blends. J. Ind. Eng. Chem., 13(3): 457–464 (2007).
46.
JacobsenS., and FritzH.G., Polym. Eng. Sci., 36: 2799 (1996).
47.
ParkJ.W., and ImS.S., Polym. Eng. Sci., 40: 2539 (2000).
48.
DuboisP., and NarayanR., Macromol. Symp., 198: 233 (2003).
49.
NarayanR., US Patent 7153354, MPK 08 L 3/06, 08 B 31/04, Chemically modified plasticized starch compositions by extrusion processing. Board of Trustees of Michigan State University, No. 10993309, appl. 19.11.2004, publ. 28.12.2006.
50.
WangN., Preparation and characterization of compatible thermoplastic dry starch/poly(lactic acid). Polym. Compos., (29): 551–559 (2008).
51.
ChielliniE. (ed.), Biomedical Polymers: Sustainable Polymer Science and Technology.Kluwer Academic/Plenum Publ., New York, NY, 407 pp. (2001).
52.
CheongK.S., Development of biodegradable plastic composite blends based on sago derived starch and natural rubber. Pertanika J. Sci. Technol., 18(2): 411–420 (2010).
53.
ZouG.-X., Extruded starch/PVA composites: water resistance, thermal properties, and morphology. J. Elast. Plast., 40: 303–316 (2008).
54.
GuohuaZ., Water resistance, mechanical properties and biodegradability of methylated cornstarch/poly(vinyl alcohol) blend film. Polym. Degrad. Stab., (4): 703–711 (2006).
55.
MaoL., Extruded cornstarch–glycerol–polyvinyl alcohol blends: mechanical properties, morphology, and biodegradability. J. Polym. Environ., 8(4): 205–211 (2000).
56.
ChungY.C., and Tzyy-LungY., Dynamic light scattering of poly(vinyl alcohol)–borax aqueous solution near overlap concentration. Polymer, 38(9): 2019–2025 (1997).
57.
BabaevskiiP.G. (ed.), Fillers for Polymer Composite Materials: Reference Book.Khimiya, Moscow, 736 pp. (1981).
58.
DongG.J., Microbiological deterioration and degradation of synthetic polymeric materials: recent research advances. Int. Biodeter. Biodegr., (2): 69–91 (2004).
59.
KumarA.P., and SinghR.P., Biocomposites of cellulose reinforced starch: improvement of properties by photo-induced crosslinking. Bioresour. Technol., (99): 8803–8809 (2008).
60.
FollainaN., Properties of starch based blends. Part 2. Influence of polyvinyl alcohol addition and photocrosslinking on starch based materials mechanical properties. Carbohydr. Polym., (60): 185–192 (2005).
