An examination is made of the latest methods for solving the urgent problem of increasing the solidity of thermoplastics (so-called monolithisation) by filling them with continuous fibres. Data on the reduction in the residual porosity and on the increase in the mechanical properties of these plastics are given.
GolovkinG.S.Technology for the production of parts from thermoplastic composites, in Engineering. Encyclopaedia. Vol. III-6.Moscow, Mashinostroenie, pp. 45–71 (2006).
3.
TrostyanskayaE.B.Trends in the application and development of composite materials in the aircraft industry. Aviatsionnaya Promyshlennost’, (2):18–22 (2002).
4.
GolovkinG.S., and DmitrenkoV.P.Scientific Principles of the Production of Articles from Thermoplastic Composites.Rusaki, Moscow, 472 pp. (2005).
5.
GunyaevG.M.The Construction of High-Modulus Polymer Composites.Mashinostroenie, Moscow, p. 57 (1977).
6.
GolovkinG.S.Fibre Technology for the Processing of Thermoplastic Composites, ed. by GolovkinG.S.MAI, Moscow, 232 pp. (1993).
7.
BunakovV.A.Reinforced Plastics, ed. by GolovkinG.S., and SemenovV.I.MAI, Moscow, 404 pp. (1997).
8.
Vasil'evV.V.Composite materials with thermoplastic matrices. Non-metallic Structural Materials. Vol. II-4. Engineering Encyclopaedia, ed. by Kul'kovA.A.Moscow, Mashinostroenie, p. 119 (2005).
9.
SyagaevaS.I.Pressureless Moulding, ed. by BraginskiiV.A.Khimiya, Moscow, p. 63 (1973).
10.
Moulding of articles by RIM technology.Polim. Mater., (12):1, 4, 5 (2003).
11.
KryzhanovskiiV.K.Production of Articles from Polymeric Materials: Textbook.Professiya, St Petersburg, p. 63 (2004).
