Similarity of Polymer Flows in the Channels of Processing Tools

Müller L. : Application of dimensional analysis in model studies. PWN, Warsaw 1983, p. 245.

Ziolkowski Z. : Basic processes of chemical engineering. Transfer of momentum, heat and mass. PWN, Warsaw 1982, p. 674.

Grybos R. : Principles of fluid mechanics. PWN, Warsaw 1989, p. 587.

Gdula S.J. : Principles of thermal engineering. Wyd. Politechniki Slaskiej, Gliwice 1976, p. 492.

Kemblowski Z. : Theoretical principles of chemical and process engineering. WNT, Warsaw 1985, p. 524.

Sikora R. : Principles of processing of high-molecular materials. Wyd. Uczelniane Politechniki Lubelskiej, Lublin 1992, p. 501.

Kemblowski Z. : Rheometry of non-Newtonian fluids. WNT, Warsaw 1973, p. 187.

Ferguson J. and Kemblowski Z. : Applied rheology of fluids. Wyd. Marcus, Lódz 1995, p. 321.

Carreau P.J. : Rheology of polymeric systems. Principles and applications. Hanser Publishers, Munich–Vienna–New York 1997, p. 520.

Pastucha L. and Otwinowski H. : Principles of heat transmission. Wyd. Politechniki Czestochowskiej, Czestochowa 1999, p. 434.

Zawistoski H. and Frenkler D. : Design of injection moulds for thermoplastics. WNT, Warsaw 1984, p. 393.

Bociaga E. : Processes determining the flow of material in an injection mould and its effectiveness. Wyd. Politechniki Czestochowskiej, Czestochowa 2001, p. 153.

Bociaga E. : Polimery 2002, 47, 122.

Kim M.S. : Int. Polym. Proc. 1996, 11, 58.

Lee Ho-S. : Polym. Eng. Sci. 1997, 37, 559.

Brzoskowski R. : Problems of flow of material in the runner system and cavity of a mould, in the collective work “Injection moulding of thermoplastics”, Wyd. PAN-SIMP, Rydzyna 1983, p. 88

Buchmann M. : Polym. Eng. Sci. 1997, 37, 667.

Szydlowski W. and Brzoskowski R. : Polimery 1984, 29, 110.

Smorawinski A. : Injection moulding technology. WNT, Warsaw 1989, p. 460.

Pötsch G. and Michaeli W. : Injection Molding. An Introduction. Hanser Publishers Munich–Vienna–New York, 1995, p. 195.

Sterzy_ski T. : Polimery 1985, 30, 343, 409, 457.

Staniszewski B. : Heat exchange – theoretical principles. PWN, Warsaw 1980, p. 467.

Wisniewski S. and Wisniewski T.S. : Heat exchange. WNT, Warsaw 1997, p. 437.

Sikora R. : Processing of high-molecular materials. WE, Warsaw 1993, p. 528.

Sikora J.W. : Study of the autothermal nature of the extrusion process and of the grooved zone of an extruder. Wyd. Uczelniane Politechniki Lubelskiej, Lublin 2000, p. 191.

Matras Z. and Nowak Z. : Modification of Reynolds number and the Fanning coefficient for rheostable flows of non-Newtonian liquids in pipes. ZN Politechniki Poznanskiej, Chemia i Inzynieria Chemiczna, Poznan 1978, No. 14, p. 5.

Costa F.S. : The effect of inertia on fill pattern in injection molding. ANTEC 2001, p. 454.

Zenkiewicz M. : Adhesion and modification of the outer layer of high-molecular materials. WNT, Warsaw 2000, p. 362.

Orzechowski Z. : Fluid mechanics in environmental engineering. WNT, Warsaw 1997, p. 590.

Sikora R. : Scientific-technical dictionary. Introduction to polymer processing. Wyd. Wadim Plast Sp. J., Warsaw 2002, p. 115.