Effect of Mould Temperature and Injection Speed on Selected Properties of Polyethylene Mouldings

Bociaga E. : Polimery, 1999, 44, p. 198

Sikora R. , Processing of Polymers. WE, Warsaw 1993, p. 528

Smorawinski A. , Injection moulding technology. WNT, Warsaw 1989, p. 460

Kowalska E. , Investigations of the amount of processing shrinkage of Tarnoform in relation to the parameters of injection moulding. Proc. of conference ‘Injection moulding and extrusion technology’, Czestochowa 1988, p. 61

C-MOLD Design Guide. A resource for plastics engineers. C-MOLD Ithaca, New York, USA 1998, p. 336

Debski W. and Przylecka M. , Polimery, 21, 1976, p. 326

Jansen K.M.B. , Int. Polym. Processing, 13, No. 3, 1998, p. 309

Zawistowski H. and Zieba S. , ‘Setting-up of the injection moulding process’, Plastech, Warsaw 1995, p. 140

Rakowski T. , ‘Effect of process variables of injection moulding on the quality of precision mouldings’. Proc. of conference ‘Progress in plastics’, Czestochowa 1985, p. 56

Jansen K.M.B. , Int. Polym. Processing, 13, No. 4, 1998, p. 417

Hawrylecka U. and Sikora R. , Polimery, 39,1994, p. 34

Barbaroux M. , Evaluation of the influence of the process parameters on the crosslink density of an injection moulded silicone network. The Polymer Processing Society, Europe/Africa Region Meeting, Gothenburg, Sweden 1997, p. 3:1

Poppe E.A. , TS Raport, 11, 1999, p. 34

Jansen K.M.B. , Int. Polym. Processing, 13, No. 1, 1998, p. 99

Koszkul J. , ‘Influence of the parameters of injection moulding and machining on selected properties of the outer layer of polypropylene’. Proc. of conference ‘Application and processing of polymeric materials’, Czestochowa 1998, p. 129

Jansen K.M.B. and van Dijk D.J. , Shrinkage of injection moulded fibre composites. The Polymer Processing Society, Europe/Africa Region Meeting, Gothenburg, Sweden 1997, p. 3:4

Jansen K.M.B. , Shrinkage anisotropy in semi-crystalline materials. The Polymer Processing Society, Europe/Africa Region Meeting, Gothenburg, Sweden 1997, p. 3:5

Pantani R. and Titomanlio G. , ‘Analysis of shrinkage development of injection moulded samples’. The Polymer Processing Society, Europe/Africa Region Meeting, Gothenburg, Sweden 1997, p. 3:13

Sikora R. , Principles of polymer processing. Wydawnictwo Uczelniane Politechniki Lubelskiej, Lublin, 1992, p. 501

Stranc W. , ‘Investigations of the effect of selected processing parameters on the dimensions and mass of articles injection moulded from polyester-glass fibre moulding compounds’. Proc. of conference: ‘Thermo-setting plastics: properties, processing and uses’, Czestochowa 1989, p. 140

Poppe E.A. , TS Raport, 10, 1999, p. 40

Bociaga E. , Polimery, 45, 2000, p. 89

Szlezyngier W. , Plastics, Politechnika Rzeszowska (Rzeszów Polytechnic), Rzeszów, 1996, p. 771