Design,Construction and Testing of a Bench-Top Multipurpose Wind Tunnel

Liu C. Y. Ng K. L. , ‘A low cost mini smoke tunnel with automatic smoke wire fueling mechanism’, Int. J. Mech. Eng. Educ., 18, 85–91 (1990).

Liu C. Y. , ‘A compact mini smoke wind tunnel’, J. Applied Eng. Educ., 7, 120–124 (1991).

Rae W. H. Jr Pope A. , Low Speed Wind Tunnel Testing, John Wiley and Sons, New York, 2nd edn, 1984.

Tsien H. S. , ‘On the design of the contraction cone for a wind tunnel’, J. Aeronautical Sc., 10, 68–70 (1943).

Morel T. , ‘Comprehensive design of axisymmetric wind tunnel contractions’, ASME J. Fluid Eng., 97, 225–233 (1975).

Mikhail M. N. Rainbird W. J. , ‘Optimum design of wind tunnel contractions’, AIAA 10th Aero. Testing Conf., paper 78-819, 376–384 (1978).

Bossel H. H. , ‘Computations of axisymmetric contractions’, AIAA J., 7, 2017–2020 (1969).

Li S. X. , ‘A method of design of contraction ducts’, Acta Mech. Sinica, 4, 367–372 (1979).

Lam K. Pomfret M. J. , ‘Design and performance of a low speed wind tunnel’, Int. J. Mech. Eng. Educ., 13, 161–172 (1984).

Schlichting H. , Boundary-Layer Theory, 7th edn, McGraw-Hill, New York, 1979.

von Karman T. , ‘Turbulence and skin friction’, J. Aero. Sci. (1934).

DeVahl D. G. , The Flow of Air Through Wire Screens, Hydraulics and Fluids Mechanics, Sylvester R. (ed.), Pergamon, New York, 1984, 191–212.

Bernardi R. T. Linehan J. H. Hamilton L. H. , ‘Low Reynolds number loss coefficient for fine mesh screens’, ASME J. Fluid Eng., Dec., 762–764 (1976).

Liu C. Y. Ng K. L. Poo A. N. , ‘Characteristics of the twin wire resistance-probe water manometer’, Trans. Inst. M. C., 8, 279–287 (1986).

Fage A. Falkner V. M. , ‘The flow around a circular cylinder’, Aero. Res. Counc. Lond., Rep. and Mem. No. 1369 (1931).

Cantwell B. J. , ‘A flying hot-wire study of the turbulent near wake of a circular cylinder at a Reynolds number of 140 000. Ph. D. thesis, California Inst. of Tech., 1976.

Song C. S. Yuan M. ‘Simulation of vortex-shedding flow about a circular cylinder at high Reynolds number’, J. Fluids Eng., 122, 155–163 (1990).

Chua L. P. Liu C. Y. , ‘Development of techniques for making hot-wire probes and a portable hot-wire calibration device, NTU Applied Research Project Report ARP-M-41-89, November 1992.