An endoreversible heat engine is an internally reversible and externally irreversible cyclic device which exchanges heat and power with its surroundings. Classical engineering thermodynamics is based on the concept of equilibrium. Time is not considered in the energy interactions between the heat engine and its environment. On the other hand, although rate of energy transfer is taught in heat transfer, the course does not cover heat engines. The finite-time thermodynamics is a newly developing field to fill in the gap between thermodynamics and heat transfer. Two types of engines are modelled in this paper—a reciprocating and a steady flow—with results obtained for maximum power output and efficiency at maximum power. It is shown that the latter is the same for both types of engines but that the maximum value of power production is different.
Get full access to this article
View all access options for this article.
References
1.
CarnotS., Reflections on the Motive Power of Fire, Dover, New York, 1960.
2.
ClausiusR., The Mechanical Theory of Heal with its Applications to the Steam-Engine and to the Physical Properties of Bodies, ed. HirstT. Archer, London, J. Van Voorst, 1867.
3.
KelvinL., The Free Expansion of Gasses, ed. AmesJ. S., Harper & Brothers, New York, 1898.
4.
GibbsJ. W., Collected Works, Longmans, Green, New York, 1931.
5.
BejanA., Entropy Generation Through Ileal and Fluid Flow, John Wiley, New York, 1982.
6.
CurzonF. L.AhlbornB., ‘Efficiency of a Carnot engine at maximum power output’, Amer. J. Phys., 43, 22–24 (1975).
7.
El-WakilM. M., Nuclear Power Engineering, McGraw-Hill, New York, 1962, pp. 162–165.
8.
RubinM. H., ‘Optical configuration of a class of irreversible engine I’, Phys. RVW, A19, 1272–1276 (1979).
9.
AndresenB.SalamonP.BerryR. S., ‘Thermodynamics in finite time: Extremals for imperfect heat engines’, J Chem. Phys., 66, 1571–1577 (1977).
10.
AndresenB.SalamonP.NitzanA.BerryR. S., ‘Thermodynamics in finite time, I. The step Carnot cycle’, Phys. RVW, A15, 2086–2093 (1977).
11.
SalamonP.AndresenB.BerryR. S., ‘Thermodynamics in finite time, II. Potentials for finite-time processes’, Phys. RVW, A15, 2094–2102 (1977).
MozurkewichM.BerryR. S., ‘Optimization of a heat engine based on a dissipative system’, J. Appl. Phys., 54, 3651–3661 (1983).
14.
BandY. B.KafriO.SalamonP., ‘Finite time thermodynamics: Optimal expansion of a heated working fluid’, J. Appl. Phys., 53, 8–28 (1982).
15.
RubinM. H., ‘Figure of merit for energy conversion process’, Am. J. Phys., 46, 637–639 (1978).
16.
RubinM. H.AndresenB., ‘Optimal staging of endoreversible heal engine’, J. Appl. Phys., 53, 1–7 (1982).
17.
RubinM. H., ‘Optimum configuration of a class of irreversible heat engine, II’, Phys. RVW, A19, 1277–1289(1979).
18.
Gustkowicz-KrusinD.ProcacciaI.RossJ., ‘On the efficiency of rate processes. Power and efficiency of heat engines’, J Chem. Phys., 69, 3898–3906 (1978).
19.
SpenceR. D.HarrisonM. J., ‘Speed dependence of efficiency of heat engines’, Am. J. Phys., 53, 890–893 (1985).
20.
TruesdallC., ‘Irreversible heat engines and the second law of thermodynamics’, Letters in Heal and Mass Transfer, 3, 267–290 (1976).
21.
HuilgolR. R., ‘Improved bounds for the work done by irreversible heat engines’, Letters in Heat and Mass Transfer, 5, 41–45 (1978).
22.
DeVosA., ‘Efficiency of some heat engines at maximum-power conditions’, American Journal of Physics, 53, 570–573 (1985).
23.
LeffH. S., “Thermal efficiency at maximum work output new results for old heat engine’, American Journal of Physics, 55, 602–610 (1987).
24.
AhlbornB.BarnardA. J., ‘Efficiency reduction of heat engines due to power extraction’, American Journal of Physics, 58, 498–499 (1990).
25.
BejanA., ‘Theory of heat transfer-irreversible power plants’, International Journal of Heat and Mass Transfer, 311211–1219 (1988).
26.
BejanA., “Theory of heat transfer-irreversible refrigeration plants’, International Journal of Heat and Mass Transfer, 32, 1631–1639.
27.
GordonJ. M., ‘Maximum power point characteristics of heat engines as a thermodynamic problem’, American Journal of Physics, 57, 1136–1142 (1989).
28.
GordonJ. M., ‘Observations on efficiency of heat engines operating at maximum power’, American Journal of Physics, 58, 370–375 (1990).
29.
WuC., ‘A performance bound for real OTEC heat engines’, Journal of Ocean Engineering, 14, 349–354 (1987).
30.
WuC., ‘Output power evaluation of a dry geothermal field plant’, International Journal of Ambient Energy, 9, 119–124 (1988).
31.
WuC., ‘Power optimization of an indirect gas-cooled nuclear reactor plant’, Nuclear Technology, 84, 123–127 (1989).
32.
WuC., ‘Power optimization of a finite-time Rankine heat engine’, International Journal of Heal and Fluid Flow, 10, 134–138 (1989).
33.
WuC., ‘Optimization of a finite-time solar radiant heat engine’, International Journal of Ambient Energy, 10, 145–150 (1989).
34.
WuC., ‘Power performance of a cascade endoreversible cycle’, Journal of Energy Conversion and Management, 30, 261–266 (1990).
35.
WuC.KiangR. L., ‘Power performance of a non-isentropic Brayton cycle’, Journal of Engineering for Gas Turbines and Power, 113, 501–504 (1991).
36.
SwansonI. W., ‘Thermodynamic optimization of irreversible power cycles with constant external reservoir temperatures’, Journal of Engineering for Gas Turbines and Power, 113, 505–510 (1991).
37.
IbrahimO. M.KleinS. A.MitchellJ. W., ‘Optimum heat power cycles for specified boundary conditions’, Journal of Engineering for Gas Turbines and Power, 113, 514–521 (1991).
38.
BejanA., Advanced Engineering Thermodynamics, John Wiley, New York, 1988.
