A kinetic model of ladle furnace (LF) process is developed in C++ format using the FactSage database and ChemApp subroutines. The model considers all the process parameters such as ferroalloy and slag dissolution, wire additions, electrical arcing, steel/slag reactions, reoxidation due to slag eye opening, heat exchange between metal/slag, and refractory dissolution. Further, a correlation for inclusion removal rate was developed as a function of argon flow rate, using discrete phase method (DPM) in Computational Fluid dynamics (CFD). Lollypop samples from steel bath and slag samples were collected from the plant for API steel grade for chemical analysis and inclusion characterisation. At LF_in, the inclusions found were mostly alumina spinel with very low amount of Mg (∼3%), followed by spinel at intermediate stage having ∼15 wt. % of Mg and after Ca treatment, inclusions transformed into CaS and Calcium Aluminate type of inclusions. Overall inclusion weight fraction varied from 136 ppm at LF_in to 93 ppm at LF_out. The model calculations were found to give very good prediction for steel and slag chemistry, and inclusion global composition as compared to the plant results. Predicted temperature was found with an accuracy of ± 5 oC, while the calculated inclusion weight fraction was having an accuracy of ±12 ppm.
KothariAKRanjanRSinghRS, et al.A real-time ferroalloy model for the optimum ladle furnace treatment during the secondary steelmaking. Ironmaking Steelmaking2019; 46: 211–220.
2.
NathNMandalKSinghA, et al.Ladle furnace on-line reckoner for prediction and control of steel temperature and composition. Ironmaking Steelmaking2006; 33: 140–150.
3.
PeranandhanthanMMazumdarD. Modeling of slag eye area in argon stirred ladles. ISIJ Int2010; 50: 1622–1631.
4.
LiuZLiBVakhrushevA, et al.Physical and numerical modeling of exposed slag eye in continuous casting mold using Euler–Euler approach. Steel Res Int2019; 90: 1800117.
5.
KrishnapisharodyKIronsGA. An extended model for slag eye size in ladle metallurgy. ISIJ Int2008; 48: 1807–1809.
6.
YoonB-HHeoK-HKimJ-S, et al.Improvement of steel cleanliness by controlling slag composition. Ironmaking Steelmaking2002; 29: 214–217.
7.
RobertsonDDeoBOhguchiS. Multicomponent mixed-transport-control theory for kinetics of coupled slag/metal and slag/metal/gas reactions: application to desulphurization of molten iron. 1984.
8.
OkuyamaGYamaguchiKTakeuchiS, et al.Effect of slag composition on the kinetics of formation of Al2O3–MgO inclusions in aluminum killed ferritic stainless steel. ISIJ Int2000; 40: 121–128.
TabatabaeiYColeyKSIronsGA, et al.A multilayer model for alumina inclusion transformation by calcium in the ladle furnace. Metall Mater Trans B2018; 49: 375–387.
11.
TabatabaeiYColeyKSIronsGA, et al.Tracking inclusions during ladle refining using a kinetic model for the compositions of metal, slag, and inclusions. Steel Res Int2019; 90: 1900155.
12.
HaradaAMaruokaNShibataH, et al.Kinetic analysis of compositional changes in inclusions during ladle refining. Isij Int2014; 54: 2569–2577.
13.
HaradaAMaruokaNShibataH, et al.A kinetic model to predict the compositions of metal, slag and inclusions during ladle refining: part 1. Basic concept and application. ISIJ Int2013; 53: 2110–2117.
14.
ZhuLJiaYLiuZ, et al.Mass-transfer model for steel, slag, and inclusions during ladle-furnace refining. High Temp Mater Processes2018; 37: 665–674.
15.
ConejoALaraFMacias-HernándezM, et al.Kinetic model of steel refining in a ladle furnace. Steel Res Int2007; 78: 141–150.
16.
ChenY-nBaoY-pWangM, et al.A mathematical model for the dynamic desulfurization process of ultra-low-sulfur steel in the LF refining process. Metall Res Technol2014; 111: 37–43.
17.
SchellerPRShuQ. Inclusion development in steel during ladle metallurgical treatment-A process simulation model–part: industrial validation. Steel Res Int2014; 85: 1310–1316.
18.
PanGWangFShangC, et al.Advances in machine learning-and artificial intelligence-assisted material design of steels. Int J Miner Metall Mater2023; 30: 1003–1024.
19.
XuZ-jZhengZGaoX-q. Operation optimization of the steel manufacturing process: a brief review. Int J Miner Metall Mater2021; 28: 1274–1287.
20.
XuTSongGYangY, et al.Visualization and simulation of steel metallurgy processes. Int J Miner Metall Mater2021; 28: 1387–1396.
21.
TianHWangAMaoZ. A new soft sensor modeling method based on modified AdaBoost with incremental learning. In: Proceedings of the 48 h IEEE Conference on Decision and Control (CDC) held jointly with 2009 28th Chinese Control Conference, 2009, pp.8375–8380: IEEE.
22.
HeFXuAWangH, et al.End temperature prediction of molten steel in LF based on CBR. Steel Res Int2012; 83: 1079–1086.
23.
WangX. Ladle furnace temperature prediction model based on large-scale data with random forest. IEEE/CAA J Autom Sin2016; 4: 770–774.
24.
XinZ-cZhangJ-sZhengJ, et al.A hybrid modeling method based on expert control and deep neural network for temperature prediction of molten steel in LF. ISIJ Int2022; 62: 532–541.
25.
YangQZhangJYiZ. Predicting molten steel endpoint temperature using a feature-weighted model optimized by mutual learning cuckoo search. Appl Soft Comput2019; 83: 105675.
26.
XinZZhangJJinY, et al.Predicting the alloying element yield in a ladle furnace using principal component analysis and deep neural network. Int J Miner Metall Mater2023; 30: 335–344.
27.
JinBXuX. Carbon emission allowance price forecasting for China Guangdong carbon emission exchange via the neural network. Global Finance Rev2024; 6: 3491–3491.
28.
JinBXuX. Forecasting wholesale prices of yellow corn through the Gaussian process regression. Neural Comput Appl2024; 36: 8693–8710.
29.
JinBXuX. Machine learning predictions of regional steel price indices for east China. Ironmaking Steelmaking 2024: 03019233241254891.
30.
JinBXuX. Price forecasting through neural networks for crude oil, heating oil, and natural gas. Meas: Energy2024; 1: 100001.
AsaiSSzekelyJ. Decarburization of stainless steel: part I. A mathematical model for laboratory scale results. Metall Mater Trans B1974; 5: 651–657.
33.
Van EndeM-AJungI-H. Development of a thermodynamic database for mold flux and application to the continuous casting process. ISIJ Int2014; 54: 489–495.
34.
Van EndeM-AJungI-H. A kinetic ladle furnace process simulation model: effective equilibrium reaction zone model using FactSage macro processing. Metall Mater Trans B2017; 48: 28–36.
35.
JungI-HVan EndeM-A. Computational thermodynamic calculations: factSage from CALPHAD thermodynamic database to virtual process simulation. Metall Mater Trans B2020; 51: 1851–1874. https://doi.org/10.1007/s11663-020-01908-7
36.
Van EndeM-AJungI-H. Applications of thermodynamic database to the kinetic steelmaking process simulations. Comput Mater Syst Des2018: 47–66.
37.
Van EndeM-AKimY-MChoM-K, et al.A kinetic model for the Ruhrstahl Heraeus (RH) degassing process. Metall Mater Trans B2011; 42: 477–489.
38.
ShinJHChungYParkJH. Refractory–slag–metal–inclusion multiphase reactions modeling using computational thermodynamics: kinetic model for prediction of inclusion evolution in molten steel. Metall Mater Trans B2017; 48: 46–59.
39.
PivaSPKumarDPistoriusPC. Modeling manganese silicate inclusion composition changes during ladle treatment using factsage macros. Metall Mater Trans B2017; 48: 37–45.
40.
KumarDAhlborgKCPistoriusPC. Development of a reliable kinetic model for ladle refining. Metall Mater Trans B2019; 50: 2163–2174.
41.
YouDMichelicSKBernhardC. Modeling of ladle refining process considering mixing and chemical reaction. Steel Res Int2020; 91: 2000045.
42.
Al-GahtaniMPillaiSAl-RaddadiA. Characterization of non-metallic inclusions in API steel grades using automated energy dispersive X-ray. In: Materials science forum. Stafa-Zurich, Switzerland: Trans Tech Publ, 2018, pp.217–220.
43.
RenYZhangYZhangL. A kinetic model for Ca treatment of Al-killed steels using FactSage macro processing. Ironmaking Steelmaking2017; 44: 497–504.
44.
KaiTOkohiraKHiguchiM, et al.Cold model study of characteristics in LD converter with bottom blowing. Tetsu-to-Hagane1983; 69: 228–237.
45.
KitamuraSYItoKPahlevaniF, et al.Development of simulation model for hot metal dephosphorization process. Tetsu-To-Hagane2014; 100: 491–499.
46.
PeterJPeasleeKDRobertsonDG, et al.Experimental study of kinetic processes during the steel treatment at two LMFs. In: AISTECH-CONFERENCE PROCEEDINGS, 2005, p.959. Citeseer.
47.
WuLValentinPSichenD. Study of open eye formation in an argon stirred ladle. Steel Res Int2010; 81: 508–515.
48.
ChildsPGreenwoodJLongC. Heat flux measurement techniques. Proc Inst Mech Eng Part C1999; 213: 655–677.
49.
ChenGHeS. Application of inhomogeneous discrete method to the simulation of transport, agglomeration, and removal of oxide inclusions in a gas-stirred ladle. JOM2019; 71: 4206–4214.
50.
WangLTZhangQYPengSH, et al.Mathematical model for growth and removal of inclusion in a multi-tuyere ladle during gas-stirring. ISIJ Int2005; 45: 331–337.
