The properties of biocompatible orthopaedic polymer developed as an alternative to the metallic materials used in reconstructive bone surgery are discussed. Experiments were conducted to enhance the mechanical characteristics of the polymer by incorporation of various fibres. The result was a super biocompatible orthopaedic polymer which could be a valuable alternative to intramedullary long bone metallic rods, whilst normal biocompatible orthopaedic polymer is currently used for bone filling and reconstructive surgery.
Get full access to this article
View all access options for this article.
References
1.
TaytonK., JohnsonC., McKibbonB.. The use of semi-rigid carbon-fibre reinforced plastic plates for fixation of human fractures.J Bone Joint Surg1982; 64B.
2.
ChristelP., MeunierA., AbolsY.. Callus characteristics following intramedullary nailing with stainless steel or epoxy-carbon nails.Arch Orthop Trauma Surg1984; 103: 131–136.
3.
HalloranW.. The slotted femoral rod.Orthop Rev1980; 9.
4.
WangG.J., RegerS.I., MabieK.N.. Semirigid rod fixation for long-bone fracture.Clin Orthop1985; 192: 291–298.
5.
SkondiaV.: Criteria for clinical development and classification of nootropic drugs.Clin Ther1979; 2: 316–332.
6.
KabesJ., SikoraJ., PisvejcJ.. Effect of piracetam on extrapyramidal side effects induced by neuroleptic drugs.Int Pharmacopsychiatry1982; 17: 185–192.
7.
CholletM.C., SkondiaV., DegraeveN.: Evaluation of the mutagenic potential of a co-polymer of N-vinylpyrrolidone and methylmethacrylate reinforced with polyamide fibres. XVIth Annual Meeting of the European Environment Mutagen Society, Brussels. 1986.
8.
MerendinoJ., SertlG., SkondiaV.: Use of biocompatible orthopaedic polymer for fracture treatment and reconstructive orthopaedic procedures.J Int Med Res1984; 12: 351–355.
