Abstract
Technical aspects on surface coil magnetic resonance imaging of the spine using a superconducting system with a field strength of 1.5 tesla are described. By using a flat surface coil instead of the body coil the image quality was markedly improved and the signal-to-noise ratio (S/N) was increased approximately 2.6 times. Small voxels resulted in low S/N. The best image quality was achieved with a slice thickness of 5 mm, a field of view of 20 to 24 cm and a matrix of 256×256. Interleaved slices provided superior image quality compared with contiguous slices at the expense of acquisition time. For sagittal images the phase encoding gradient should be in the cranio-caudal direction to minimize motion artifacts. To obtain T1 and T2 images of high quality, spin echo pulse sequences with TR 600/TE 20 ms and TR 2000/TE 40 to 80 ms are useful.
Keywords
Get full access to this article
View all access options for this article.