Configuration Control of a Mobile Dexterous Robot: Real-Time Implementation and Experimentation

Abstract

This article describes the design and implementation of a real- time control system with multiple modes of operation for a mobile, dexterous manipulator. The manipulator under study is a kinematically redundant seven-degree-of-freedom arm from Robotics Research Corporation, mounted on a one-degree-of- freedom motorized platform. The manipulator-plus-platform system has two degrees-of-redundancy for the basic task of end-effector placement and orientation. The redundancy reso lution is achieved by accomplishing two additional tasks using the configuration-control technique. The system allows a choice of arm-angle control or collision avoidance for the seventh task, and elbow-angle control or platform placement for the eighth task. In addition, joint-limit avoidance tasks are auto matically invoked when any of the manipulator joints approach their limits. The system is robust to singularities, and the user is capable of assigning weighting factors to end-effector mo tion, joint-limit avoidance, and redundancy resolution tasks. The motion-control algorithms are executed at 1.1 ms on two MC68040 processors in a VME-bus environment running the VxWorks real-time operating system. The article describes the hardware and software components of the manipulator- control system. Experimental results on real-time control of the Robotics Research arm are also presented.

Get full access to this article

View all access options for this article.

References

Brady, M. , et al. 1982. Robot Motion: Planning and Control. Cambridge, MA: MIT Press.

Craig, J. 1986. Introduction to Robotics: Mechanics and Control . Reading, MA: Addison-Wesley.

Glass, K. , Colbaugh, R. , Lim, D. , and Seraji, H. 1995. Real-time collision avoidance for redundant manipulators . IEEE Trans. Robot. Automat., 11(3):448-457.

Hayati, S. , Balaram, J. , Seraji, H. , Kim, W.S. , and Tso, K. 1993. Remote surface inspection system. Robot. Autonomous Sys. 11(1):45-49.

Kreutz-Delgado, K. , Long, M. , and Seraji, H. 1992. Kinematic analysis of 7-DOF manipulators. Int. J. Robot. Res. 11(5):469-481.

Nakamura, Y. , and Hanafusa, H. 1986. Inverse kinematic solutions with singularity robustness for robot manipulator control. ASME J. Dyn. Syst. Meas. Control 108:163-171.

Schnurr, R. , O'Brien, M. , and Cofer, S. 1989 (January, Pasadena, CA). The Goddard Space Flight Center robotics technology testbed. In Proceedings of the Second NASA Conference on Space Telerobotics , pp. 491-500.

Seraji, H. 1989. Configuration control of redundant manipulators: theory and implementation. IEEE Trans. Robot Automat. 5(4):472-490.

Seraji, H. 1992. Task-based configuration control of redundant robots . J. Robot. Sys. 9(3):411-451.

10.

Seraji, H. 1993 (May, Atlanta, GA). An on-line approach to coordinated mobility and manipulation. In Proceedings of the IEEE International Conference on Robotics and Automation , pp. 28-33.

11.

Seraji, H. 1995. Reachability analysis for base placement in mobile manipulators . J. Robot. Sys. 12(1):29-43.

12.

Seraji, H. , and Colbaugh, R. 1990. Improved configuration control for redundant robots . J. Robot. Sys. 7(6):897-928.

13.

Seraji, H. , Long, M. , and Lee, T. 1993. Motion control of 7-DOF arms: the configuration control approach. IEEE Trans. Robot. Automat. 9(2):125-139.

14.

Volpe, R. 1993 (May, Atlanta, GA). Task space velocity blending for real-time trajectory generation. In Proceedings of the IEEE International Conference on Robotics and Automation , pp. 680-687.

15.

Wampler, C. , and Leifer, L. 1988. Applications of damped-least-squares methods to resolved-rate and resolved-acceleration control of manipulators. ASME J. Dyn. Sys. Meas. Control 110:31-38.

16.

Yoshikawa, T. 1985 (March, St. Louis, MO). Manipulability and redundancy control of robotics mechanisms. In Proceedings of the IEEE International Conference on Robotics and Automation , pp. 1004-1009.