Modeling Gimbal Axis Misalignments and Mirror Center Offset in a Single-Beam Laser Tracking Measurement System

Abstract

The calibration of robots and machine tools normally requires external pose measuring devices to provide precision cal ibration measurement data. Among the various coordinate measuring techniques, laser tracking systems based on in terferometry offer the potential for continuously producing noninvasive and highly accurate measurements over a large work volume. This article addresses the error modeling is sue for laser tracking coordinate measuring systems, which is crucial in the accuracy enhancement of such systems.

Relative distance measurements provided by laser interfer ometers have an extremely high resolution. However, accuracy errors of a coordinate measuring machine based on laser tracking are dominated by geometric errors in the tracking mir ror system. Major geometric error sources include gimbal axis misalignments and mirror center offset. In this article a kine matic model for the single-beam tracker is developed in which a necessary and sufficient number of kinematic parameters are used to represent these two types of error sources for ar bitrary target positions. This model, together with its error model, which is also presented in this article, can be used for design, calibration, and control of single-beam laser tracking measurement systems.

Get full access to this article

View all access options for this article.

References

Aerotech Inc. 1992. AOM360D Series—Two Axis Direct Drive Positioning Mounts for Mirrors, Video/Cameras, Telescopes, and Lasers, product catalog, Pittsburgh, PA.

Borm, J.H. , and Menq, C.H. 1991. Determination of optimal measurement configurations for robot calibration based on observability measure. Int. J. Rohot. Res. 10(1):51-63.

Brown, L.B. , Merry, J.B. , and Wells, D.N. 1986. Coordinate measurement with a tracking laser interferometer . Lasers & Applications, October:69-71.

Driels, M.R. , and Pathre, U.S. 1990. Significance of observation strategy on the design of robot calibration experiments. J. Robot. Sys. 7(2):197-223.

Everett, L.J. , Driels, M. , and Mooring, B.W. 1987. Kinematic modeling for robot calibration. Proc. IEEE Int. Conf. Robotics Automation, pp. 183-189.

Khalil, W. , Gautier, M. , and Enguehard, C. 1991. Identifiable parameters and optimum configurations for robot calibrations. Robotica 9:63-70.

Lau, K. , Hocken, R. , and Haynes, L. 1985. Robot performance measurements using automatic laser tracking techniques. Robot Computer-Integrated Manufact. 2(3):227-236.

Levi, L. 1968. Applied Optics—A Guide to Optical System Design . Vol. 1. New York: John Wiley & Sons.

Marquardt, D.W. 1963. An algorithm for least-squares estimation of nonlinear parameters. J. Soc. Indust. Appl. Math. 11(2):431-441.

10.

Mooring, B.W. 1991. Calibration of a laser projection system. Presented at the ASME Winter Annual Meeting, DSC-Vol. 29, Atlanta, pp. 33-41.

11.

Mooring, B.W. , Roth, Z.S. , and Driels, M.R. 1991. Fundamentals of Manipulator Calibration. New York: John Wiley.

12.

Xie, X. , Li, B. , Zhuang, H. , and Roth, Z.S. 1991 (May). Mirror center offset elimination of a multi-beam laser tracking system. Proceedings of the 4th Conference on Recent Advances in Robotics, Florida Atlantic University , Boca Raton, FL, pp. 117-126.

13.

Zhuang, H. , Li, B. , Roth, Z.S. , and Xie, X. 1992a. Self-calibration and mirror center offset elimination of a multi-beam laser tracking system. J. Robot. Autonomous Sys. 9:255-269.

14.

Zhuang, H. , Roth, Z.S. , and Hamano, F. 1992b. A complete and parametrically continuous kinematic model . IEEE Trans. Robot. Automation 8(4):451-463.