Kinematics of an n-Degree- of-Freedom Multi-Link Robotic System

Abstract

A kinematic model is developed for n-degree-of-freedom multi-link manipulator systems. An essential step in the de velopment is the formulation of modified Eulerian angles, to allow maximum flexibility in positioning each link. Using the modified Eulerian angle method the kinematics of a system can be solved by multiplying fewer transformation matrices than is required by existing methods, thus reducing the complexity of computation. By allowing for a maximum number of kinematic variables (three for position and three for orientation) for each link, the analysis can be pursued in a general form without preimposed constraints on the system. The resulting formulation can be used as a basis for off-line analysis and design of a multi-link system. The inverse kine matics problem is solved by minimizing an objectivefunction that quantifies the joint displacements. A 16-degree-of- freedom redundant system is presented as an illustrative problem. Our algorithm provides highly accurate numerical solutions. Also, using our method a PUMA 560 robot arm is analyzed, and theformulation is compared with that ob tained by the Denavit-Hartenberg method.

Get full access to this article

View all access options for this article.

References

Abadie, J. , and Carpentier, J. 1969. Generalized reduced gradient method to the case of nonlinear constraints In R. Fletcher (ed.): Optimization . London: Academic Press Inc.

Craig, J.J. 1987. Introduction to Robotics. Reading, Mass.: Addison-Wesley Publishing Co.

Denavit, J. , and Hartenberg, R.S. 1955. A kinematic notation for lower-pair mechanisms based on matrices. J. Appl. Mech. 77(2):215-221.

Fletcher, R. , and Powell, M. 1963. A rapidly convergent descent method for minimization Comp. J. 6(2):163-168.

LaFrance, L. , Hamilton, J. , and Ragsdell, K. 1977. On the performance of combined generalized reduced gradient and Davidon-Fletcher-Powell algorithm: GRGDFF. Eng. Optimization , 2:269-278.

Stone, H.W. 1987. Kinematic Modeling, Identification, and Control of Robotic Manipulators Norwell, Mass.: Kluwer Academic Publishers.

Whitney, D.E. , and Lozinski, C.A. 1984 (August). Industrial robot calibration methods and results . Proc. Int. Comp. Eng. Conf. New York : ASME, pp. 92-100.