Sage Journals: Discover world-class research

Abstract

The objectives of the work described in this paper are to develop and evaluate a method for calculation of interference between objects in a robot welding workstation, to develop a robot trajectory planning technique recognizing interference, inverse kinematics constraints, and welding parameter re quirements, and to demonstrate the trajectory planning tech nique using advanced computer graphics. Workstation mod eling and relevant kinematic relationships are discussed. A method of interference calculation is developed which allows rapid calculation of interference between convex polyhedra using a steepest descent graph search. If desired, exact sepa rating distances and directions can be found. A simple mod ule for automatic selection of welding parameters is de scribed. Interference-free trajectories that do not violate kinematics constraints are found by searching among possi ble inverse kinematic solutions for the desired welding torch trajectory. The above methods have been combined and implemented using interactive graphics in a prototype soft ware package called A UTO WELD.

Get full access to this article

View all access options for this article.

References

Buchal, R. 1987. Determination of robot trajectories satisfying joint limit and interference constraints using an optimization method. Ph.D. thesis, University of British Columbia, Department of Mechanical Engineering.

Denavit, J. , and Hartenberg, R. 1955. A kinematic notation for lower-pair mechanisms based on matrices. J. Appl. Mech. 22(1):215-221.

Gilbert, E. , and Johnson, D. 1985. Distance functions and their application to robot path planning in the presence of obstacles. IEEE J. Robotics Automat. RA-1(1):21-30.

Hornick, M. , and Ravani, B. 1986. Computer-aided off-line planning and programming of robot motion. Int. J. Robotics Res. 4(4):18-31.

Houldcroft, P. 1977. Welding Process Technology. Cambridge : Cambridge University Press.

Latombe, J. , Laugier, C. , Lefebvre, J. , Mazer, E. , and Miribel, J. 1985. The LM robot programming system. In Robotics Research: The Second International Symposium, eds. H. Hanafusa and H. Inoue , pp. 377-391. Cambridge : MIT Press.

Liegeois, A. , Borrel, P. , and Dombre, E. 1985. Programming, simulation and evaluating robot actions. In Robotics Research: The Second International Symposium, eds. H. Hanafusa and H. Inoue , pp. 411-418. Cambridge: MIT Press .

Lindberg, R. , and Braton, N. 1976. Welding and Other Joining Processes. Boston: Allyn and Bacon.

Nemec, B. , and Lenarcic, J. 1985. A robot simulation system based on kinematic analysis . Robotica 3:79-84.

10.

Patton, W. 1967. The Science and Practice of Welding. Englewood Cliffs, N.J.: Prentice Hall.

11.

Paul, R. 1981. Robot Manipulators: Mathematics, Programming and Control . Cambridge: MIT Press.

12.

Paul, R. , Shimano, B. , and Mayer, G. 1981. Kinematic control equations for simple manipulators. IEEE Trans. Systems, Man, Cybernet. SMC-11(6):449-455.

13.

Schmidt, R. 1982. Welding Skills and Technology. Old Tappan, N.J.: Reston.

Simulated Off-Line Programming of Welding Robots

Abstract

Get full access to this article

References