Sage Journals: Discover world-class research

Abstract

We design, optimize and demonstrate the behavior of a tendon-driven robotic gripper performing parallel, enveloping and fingertip grasps. The gripper consists of two fingers, each with two links, and is actuated using a single active tendon. During unobstructed closing, the distal links remain parallel, for parallel grasps. If the proximal links are stopped by contact with an object, the distal links start flexing, creating a stable enveloping grasp. We optimize the route of the active flexor tendon and the route and stiffness of a passive extensor tendon in order to achieve this behavior. We show how the resulting gripper can also execute fingertip grasps for picking up small objects off a flat surface, using contact with the surface to its advantage through passive adaptation. Finally, we introduce a method for optimizing the dimensions of the links in order to achieve enveloping grasps of a large range of objects, and apply it to a set of common household objects.

Keywords

Robot grasping robotic hands underactuation mechanical compliance mechanism synthesis

Get full access to this article

View all access options for this article.

References

Balasubramanian

Dollar

(2011) Performance of serial underactuated mechanisms: Number of degrees of freedom and actuators. In: IEEE/RSJ International conference on intelligent robots and systems, San Francisco, CA, 25–30 September 2011, pp. 1823–1829.

Bicchi

Prattichizzo

(2000) Analysis and optimization of tendinous actuation for biomorphically designed robotic systems. Robotica 18: 23–31.

Birglen

Laliberte

Gosselin

(2008) Underactuated Robotic Hands (Springer Tracts in Advanced Robotics). Berlin: Springer.

Borst

Fischer

Hirzinger

(2002) Calculating hand configurations for precision and pinch grasps. In: IEEE International conference on intelligent robots and systems, Lausanne, Switzerland, 30 September–4 October 2002, Vol. 2, pp. 1554–1559.

Brown

Asada

(2007) Inter-finger coordination and postural synergies in robot hands via mechanical implementation of principal components analysis. In: IEEE/RSJ International conference on intelligent robots and systems, San Diego, CA, 29 October–2 November 2007, pp. 2877–2882.

Buss

Hashimoto

Moore

(1996) Dextrous hand grasping force optimization. IEEE Transactions on Robotics and Automation 12(3): 406–418.

Carrozza

Cappiello

Micera

. (2006) Design of a cybernetic hand for perception and action. Biological Cybernetics 95(6): 629–644.

Ciocarlie

Allen

(2011) A constrained optimization framework for compliant underactuated grasping. International Journal of Mechanical Sciences 2(1): 17–26.

Dollar

Howe

(2006) Joint coupling design of underactuated grippers. In: 30th annual ASME mechanisms and robotics conference, Philadelphia, PA, USA, September 2006.

10.

Dollar

Howe

(2007) Simple, robust autonomous grasping in unstructured environments. In: IEEE International conference on robotics and automation, Rome, 10–14 April 2007, pp. 4693–4700.

11.

Ferrari

Canny

(1992) Planning optimal grasps. In: IEEE International conference on robotics and automation, Nice, France, 12–14 May 1992, pp. 2290–2295.

12.

Pollard

(2006) On the importance of asymmetries in grasp quality metrics for tendon driven hands. In: IEEE/RJS International conference on intelligent robots and systems, Beijing, 9–15 October 2006, pp. 1068–1075.

13.

Gosselin

Laliberte

Degoulange

(1998) Underactuated robotic hand. In: Video proceedings of the IEEE International conference on robotics and automation, Leuven, Belgium, 16–20 May 1998.

14.

Gosselin

Pelletier

Laliberte

(2008) An anthropomorphic underactuated robotic hand with 15 DOFs and a single actuator. IEEE International conference on robotics and automation, Pasadena, CA, 19–23 May 2008, pp. 749–754.

15.

Han

Trinkle

(2000) Grasp analysis as linear matrix inequality problems. IEEE Transactions on Robotics and Automation 16(6): 663–674.

16.

Hirose

Umetani

(1978) The development of soft gripper for the versatile robot hand. Mechanism and Machine Theory 13(3): 351–359.

17.

Khan

Angeles

(2005) The kinetostatic optimization of robotic manipulators: The inverse and the direct problems. ASME Journal of Mechanical Design 128(1): 168–178.

18.

Kragten

Bosch

Van Dam

. (2009) On the effect of contact friction and contact compliance on the grasp performance of underactuated hands. In: ASME International design engineering technical conference and computers and information in engineering conference.

19.

Krovi

Ananthasuresh

Kumar

(2002) Kinematic and kinetostatic synthesis of planar coupled serial chain mechanisms. ASME Journal of Mechanical Design 124(2): 301–312.

20.

Kurtz

Hayward

(1991) Dexterity measure for tendon actuated parallel mechanisms. In: IEEE International conference on advanced robotics, Pisa, Italy, 19–22 June 1991, Vol 2., pp. 1141–1146.

21.

Kwak

Blankevoort

Ateshian

(2000) A mathematical formulation for 3D quasi-static multibody models of diarthroidal joints. Computer Methods in Biomechanics and Biomedical Engineering 3: 41–64.

22.

Laliberte

Birglen

Gosselin

(2002) Underactuation in robotic grasping hands. Machine Intelligence and Robotic Control 4(3): 1–11.

23.

Mason

Salisbury

(1985) Robot Hands and the Mechanics of Manipulation. Cambridge, MA: MIT Press.

24.

Odhner

Dollar

(2012) Precision grasping and manipulation of small objects from flat surfaces using underactuated fingers. In: IEEE/RSJ International conference on robotics and automation, Saint Paul, MN, 14–18 May 2012, pp. 2830–2835.

25.

Pollard

Gilbert

(2002) Tendon arrangement and muscle force requirements for humanlike force capabilities in a robotic finger. IEEE International conference on robotics and automation, Washington DC, 11–15 May, Vol. 4, pp. 3755–3762.

26.

Spanjer

Balasubramanian

Dollar

. (2012) Underactuated gripper that is able to convert from precision to power grasp by a variable transmission ratio. In: IEEE International conference on reconfigurable mechanisms and robotics, Tianjin, China, July 2012.

27.

Tsai

(1999) Robot Analysis. New York: John Wiley & Sons.

28.

Ulrich

Paul

Bajcsy

(1988) A medium-complexity compliant end effector. In: IEEE International conference on robotics and automation, Philadelphia, PA, 24–29 April 1988, Vol. 1, pp. 434–436.

Supplementary Material

Please find the following supplemental material available below.

For Open Access articles published under a Creative Commons License, all supplemental material carries the same license as the article it is associated with.

For non-Open Access articles published, all supplemental material carries a non-exclusive license, and permission requests for re-use of supplemental material or any part of supplemental material shall be sent directly to the copyright owner as specified in the copyright notice associated with the article.

0.00 MB

The Velo gripper: A versatile single-actuator design for enveloping,parallel and fingertip grasps

Abstract

Keywords

Get full access to this article

References

Supplementary Material