The technologies that are needed for the atomically precise fabrication of diamondoid nanorobots in macroscale quantities at low cost require the development of a new nanoscale manufacturing technology called positional diamondoid molecular manufacturing, enabling diamondoid nanofactories that can build nanorobots. Achieving this new technology will require the significant further development of four closely related technical capabilities: (1) diamond mechanosynthesis1 (2) programmable positional assembly1 (3) massively parallel positional assembly1 and (4) nanomechanical design. The Nanofactory Collaboration is coordinating a combined experimental and theoretical effort involving direct collaboration among dozens of researchers at multiple institutions in four countries to explore the feasibility of positionally controlled mechanosynthesis of diamondoid structures using simple molecular feedstocks, which is the first step along a direct pathway to developing working nanofactories that can fabricate diamondoid medical nanorobots.
Allis, D.G. and Drexler, K.E. (2005). Design and analysis of a molecular tool for carbon transfer in mechanosynthesis. J Comput Theor Nanosci., 2: 45-55, http://e-drexler.com/d/05/00/DC10C-mechanosynthesis.pdf .
2.
Chrusch, D.D., Podaima, B.W. and Gordon, R. (2002). Cytobots: intracellular robotic micromanipulators . Proceedings of the 2002 IEEE Canadian Conference on Electrical and Computer Engineering, Kinsner, W. and Sebak, A. (eds), 12-15 May. IEEE, Winnipeg, http://www.umanitoba.ca/faculties/medicine/radiology/Dick_Gordon_papers/Chrusch,Podaima,Gordon2002.
3.
Cohen, J.D., Sadowski, J.P. and Dervan, P.B. (2007). Addressing single molecules on DNA nanostructures . Angew Chem. Int. Ed., 46: 7956-7959.
4.
Committee to Review the NNI (National Nanotechnology Initiative). (2006). National Materials Advisory Board (NMAB), National Research Council (NRC), A Matter of Size: Triennial Review of the National Nanotechnology Initiative. Washington DC , The National Academies Press, http://www.nap.edu/catalog/11752.html#toc.
5.
Drexler, K.E. (1992). Nanosystems: Molecular Machinery, Manufacturing, and Computation. New York, John Wiley & Sons.
6.
Freitas, R.A., Jr. (1998). Exploratory design in medical nanotechnology: a mechanical artificial red cell. Artif. Cells Blood Subst. Immobil. Biotech., 26: 411-430, http://www.foresight.org/Nanomedicine/Respirocytes.html.
7.
Freitas RA Jr. (1999). Nanomedicine, Volume I: Basic Capabilities. Georgetown, TX, Landes Bioscience, http://www.nanomedicine.com/NMI.htm
8.
Freitas, R.A., Jr. (2000a). Nanodentistry. J. Amer. Dent. Assoc., 131: 1559-1566, http://www.rfreitas.com/Nano/Nanodentistry.htm.
9.
Freitas, R.A., Jr. (2000b). Clottocytes: artificial mechanical platelets . IMM Report No. 18, Foresight Update No. 41, pp. 9-11, http://www.imm.org/Reports/Rep018.html.
Freitas, R.A., Jr. (2005a). Microbivores: artificial mechanical phagocytes using digest and discharge protocol. J. Evol. Technol., 14: 1-52, http://jetpress.org/volume14/Microbivores.pdf .
12.
Freitas, R.A., Jr. (2005b). Nanotechnology, Nanomedicine and Nanosurgery . Int. J. Surgery, 3: 1-4, http://www.nanomedicine.com/Papers/IntlJSurgDec05.pdf.
13.
Freitas, R.A., Jr. (2005c). Current status of nanomedicine and medical nanorobotics . J. Comput. Theor. Nanosci., 2: 1-25, http://www.nanomedicine.com/Papers/NMRevMar05.pdf.
14.
Freitas, R.A., Jr. (2005d). A simple tool for positional diamond mechanosynthesis, and its method of manufacture. U.S. Provisional Patent Application No. 60/543,802, filed 11 February 2004, U.S. Patent Pending, 11 February 2005, http://www.MolecularAssembler.com/Papers/DMSToolbuildProvPat.htm .
15.
Freitas, R.A., Jr. (2006). Pharmacytes: an ideal vehicle for targeted drug delivery. J. Nanosci. Nanotechnol., 6: 2,769-2,775, http://www.nanomedicine.com/Papers/JNNPharm06.pdf.
16.
Freitas, R.A., Jr. (2007). The ideal gene delivery vector: chromallocytes, cell repair nanorobots for chromosome replacement therapy. J. Evol. Technol., 16: 1-97, http://jetpress.org/v16/freitas.pdf.
17.
Freitas, R.A., Jr. (2008). Comprehensive nanorobotic control of human morbidity and aging. The Future of Aging: Pathways to Human Life Extension , Fahy, G. M., West, M. D., Coles, L. S. and Harris, S. B. (eds). New York, Springer, ch. 15.
18.
Freitas, R.A., Jr., Allis, D.G. and Merkle, R.C. (2007). Horizontal Ge-substituted polymantane-based C2 dimer placement tooltip motifs for diamond mechanosynthesis. J. Comput. Theor. Nanosci., 4: 433-442, http://www.Molecular-Assembler.com/Papers/DPTMotifs.pdf
19.
Freitas, R.A., Jr. and Merkle, R.C. (2004). Kinematic Self-Replicating Machines. Georgetown, TX, Landes Bioscience, http://www.MolecularAssembler.com/KSRM.htm.
20.
Freitas, R.A., Jr. and Merkle, R.C. (2007). Remaining technical challenges for achieving positional diamondoid molecular manufacturing and diamondoid nanofactories. Nanofactory Collaboration website, http://www.Molecular-Assembler.com/Nanofactory/Challenges.htm .
21.
Freitas, R.A., Jr. and Merkle, R.C. (2008). A minimal toolset for positional diamond mechanosynthesis . J. Comput. Theor. Nanosci., 5: 760-861.
22.
Freitas, R.A., Jr. and Phoenix, C.J. (2002). Vasculoid: a personal nanomedical appliance to replace human blood. J. Evol. Technol., 11: 1-139, http://www.jetpress.org/volume11/vasculoid.pdf.
23.
Ishiyama, K., Sendoh, M. and Arai, K.I. (2002). Magnetic micromachines for medical applications . J. Magnetism Magnetic. Mater., 242-245: 1163-1165.
Lee, H.J. and Ho, W. (1999). Single bond formation and characterization with a scanning tunneling microscope. Science, 286: 1719-1722, http://www.physics.uci. edu/%7Ewilsonho/stm-iets.html.
26.
Lee, J.H. et al. (2007). Site-specific control of distances between gold nanoparticles using phosphorothioate anchors on DNA and a short bifunctional molecular fastener. Angew Chem. Int. Ed. Engl., 46: 9,006-9,010.
27.
Mann, D.J. et al. (2004). Theoretical analysis of diamond mechanosynthesis. Part II. C2 mediated growth of diamond C(110) surface via Si/Ge-triadamantane dimer placement tools. J Comput. Theor. Nanosci., 1: 71-80, http://www.MolecularAssembler.com/JCTNMannMar04.pdf .
28.
Mathieu, J.B. et al. (2005). MRI systems as a mean of propulsion for a microdevice in blood vessels. Biomed. Mater. Eng., 15: 367.
29.
Merkle, R.C. (1997). A proposed "metabolism" for a hydrocarbon assembler . Nanotechnology, 8: 149-162, http://www.zyvex.com/nanotech/hydroCarbonMetabolism.html.
30.
Merkle, R.C. and Freitas, R.A., Jr. (2003). Theoretical analysis of a carbon-carbon dimer placement tool for diamond mechanosynthesis. J. Nanosci. Nanotechnol., 3: 319-324, http://www.rfreitas.com/Nano/JNNDimerTool.pdf .
31.
Monash University. (2006). Micro-robots take off as ARC announces funding. Press release, 11 October 2006, http://www.monash.edu.au/news/newsline/story/1038.
Nist. (2004). Autonomous Atom Assembly, http://cnst.nist.gov/epg/Projects/STM/aaa_proj.html .
34.
Oyabu, N. et al. (2003). Mechanical vertical manipulation of selected single atoms by soft nanoindentation using near contact atomic force microscopy . Phys. Rev. Lett., 90: 176,102, http://link.aps.org/abstract/PRL/v90/e176102 .
35.
Peng, J. et al. (2006). Theoretical analysis of diamond mechanosynthesis. Part III. Positional C2 deposition on diamond C(110) surface using Si/Ge/Sn-based dimer placement tools. J. Comput. Theor. Nanosci., 3: 28-41, http://www.MolecularAssembler.com/Papers/JCTNPengFeb06.pdf.
36.
Popa, D.O. and Stephanou, H.E. (2004). Micro- and Meso-Scale Robotic Assembly. SMEJ. Manuf. Proc., 6: 52-71.
37.
Sims, M. (2006). Molecular modeling in CAD. Machine Design, 78: 108-113.
38.
Temelso, B. et al. (2006). High-level ab initio studies of hydrogen abstraction from prototype hydrocarbon systems. J. Phys. Chem. A, 110: 11160-11173, http://www.MolecularAssembler.com/Papers/TemelsoHAbst.pdf.
39.
Temelso, B. et al. (2007). Ab initio thermochemistry of the hydrogenation of hydrocarbon radicals using silicon, germanium, tin and lead substituted methane and isobutane. J. Phys. Chem. A, 111: 8677-8688, http://www.Molecular-Assembler.com/Papers/TemelsoHDon.pdf.
40.
Tsui, K. et al. (2004). Micromachined end-effector and techniques for directed MEMS assembly. J. Micromech. Microeng., 14: 542-549, http://dx.doi.org/10.1088/0960-1317/14/4/015 .
41.
Yesin, K.B. et al. (2005). Biomedical micro-robotic system. Proceedings of the 8th Intl Conference on Medical Image Computing and Computer Assisted Intervention (MICCAI 2005/www.miccai2005.org), Palm Springs, CA, 26-29 October, p. 819.
