Abstract
One of the important aspects in the development of high-throughput platforms based on a fleet of scientific instruments in the form of miniature wireless robots designed for fast operations at the nanometer-scale, is the conception of an embedded locomotion system capable of fast displacements between two successive locations while being accurate enough to position the robot within the range of the embedded instrument, typically within a few tenths of nanometers. This paper describes not only the fundamental principles of the locomotion method and mechanisms but the main constraints, challenges, and environmental conditions that must be taken into account in the implementation of such a system. Preliminary experimental results show the validity of this approach.
Get full access to this article
View all access options for this article.
References
Supplementary Material
Please find the following supplemental material available below.
For Open Access articles published under a Creative Commons License, all supplemental material carries the same license as the article it is associated with.
For non-Open Access articles published, all supplemental material carries a non-exclusive license, and permission requests for re-use of supplemental material or any part of supplemental material shall be sent directly to the copyright owner as specified in the copyright notice associated with the article.
