Abstract
This paper addresses the problem of rejecting interference due to secondary specular reflections, cross-talk and other mechanisms in an active light stripe scanner for robotic applications. Conventional scanning methods control the environment to ensure the brightness of the stripe exceeds that of all other features. However, this assumption is likely to be violated for a robot operating in an uncontrolled environment. Robust scanning methods already exist, but suffer from problems including assumed scene structure, acquisition delay, lack of error recovery, and incorrect modeling of measurement noise. We propose a robust technique that overcomes these problems, using two cameras and knowledge of the light plane orientation to disambiguate the primary reflection from spurious measurements. Unlike other robust techniques, our validation and reconstruction algorithms are optimal with respect to sensor noise. Furthermore, we propose a procedure to calibrate the system using measurements of an arbitrary non-planar target, providing robust validation independently of ranging accuracy. Finally, our robust techniques allow the sensor to operate in ambient indoor light, allowing color and range to be implicitly registered. An experimental scanner demonstrates the effectiveness of the proposed techniques. Source code and sample data are provided in the multimedia extensions.
Get full access to this article
View all access options for this article.
References
Supplementary Material
Please find the following supplemental material available below.
For Open Access articles published under a Creative Commons License, all supplemental material carries the same license as the article it is associated with.
For non-Open Access articles published, all supplemental material carries a non-exclusive license, and permission requests for re-use of supplemental material or any part of supplemental material shall be sent directly to the copyright owner as specified in the copyright notice associated with the article.
