Synthesis of Reactionless Spatial 3-DoF and 6-DoF Mechanisms without Separate Counter-Rotations

Abstract

In this paper we present the synthesis of novel reactionless spatial three-degrees-of-freedom (3-DoF) and 6-DoF mechanisms without any separate counter-rotation, using four-bar linkages. Based on the conditions of dynamic balancing of a single planar four-bar linkage developed elsewhere, the spatial problem is shown to be equivalent to ensuring that the inertia tensor of reactionless four-bar linkage(s), which is(are) attached on the moving link of a reactionless four-bar linkage, remains constant while moving. The reactionless conditions for planar four-bar linkages undergoing spatial motion are first given. Then, reactionless spatial 3-DoF mechanisms using four-bar linkages are synthesized. A numerical example of the reactionless spatial 3-DoF mechanism is given and, with the help of the dynamic simulation software ADAMS, it is shown that the mechanism is reactionless for arbitrary trajectories. Finally, this mechanism is used to synthesize reactionless 6-DoF parallel mechanisms.

Get full access to this article

View all access options for this article.

References

Agrawal, S. K. and Shirumalla, S. 1995. Planning motions of a dual-arm free-floating manipulator keeping the base inertially fixed . Mechanism and Machine Theory 30(1): 59-70 .

Angeles, J., Nahon, M. A., and Thümmel, T. 1992. Active control for the complete dynamic balancing of linkages . Flexible Mechanisms, Dynamics, and Analysis, Proceedings of the 22nd ASME Biennial Mechanisms Conference, Scottsdale, AZ, Vol. DE-47, pp. 305-310 .

Arakelian, V. H. and Smith, M. R. 1999. Complete shaking force and shaking moment balancing of linkages . Mechanism and Machine Theory 34(8): 1141-1153 .

Asada, H. and Youcef-Toumi, K. 1984. Analysis and design of a direct-drive arm with a five-bar-link parallel drive mechanism . Journal of Dynamic Systems, Measurement, and Control 106(3): 225-230 .

Bagci, C. 1982. Complete shaking force and shaking moment balancing of link mechanisms using balancing idler loops . ASME Journal of Mechanical Design 104: 482-493 .

Bagci, C. 1992. Complete balancing of linkages using complete dynamical equivalents of floating links: CDEL method . Flexible Mechanisms, Dynamics, and Analysis, Proceedings of the 22nd Biennial Mechanisms Conference, Scottsdale, AZ, Vol. DE-47, pp. 477-488 .

Bagci, C. 1983. Complete balancing of space mechanisms—shaking force balancing . ASME Journal of Mechanisms, Transmissions, and Automation in Design 105: 609-616 .

Bedford, A. and Fowler, W. 1996. Engineering Mechanics: Dynamics, Addison-Wesley, Reading, MA .

Berkof, R. S. 1973. Complete force and moment balancing of inline four-bar linkages . Mechanism and Machine Theory 8: 397-410 .

10.

Berkof, R. S. and Lowen, G. G. 1969. A new method for completely force balancing simple linkages . ASME Journal of Engineering for Industry 91(1): 21-26 .

11.

Dresig, H. et al. (VDI). 1998. Dynamics of mechanisms—Rigid body mechanisms, Richtlinien 2149 Part 1, Verein Deutscher Ingenieure.

12.

Dubowsky, S. and Torres, M. A. 1991. Path planning for space manipulators to minimize spacecraft attitude disturbances . Proceedings of the IEEE International Conference on Robotics and Automation, Sacramento, CA, pp. 2522-2528 .

13.

Esat, I., and Bahai, H. 1999. A theory of complete force and moment balancing of planer linkage mechanisms . Mechanism and Machine Theory 34(6): 903-922 .

14.

Gao, F. 1989. Complete shaking force and shaking moment balancing of four types of six-bar linkages . Mechanism and Machine Theory 24(4): 275-287 .

15.

Gao, F. 1991. Complete shaking force and shaking moment balancing of 17 types of eight-bar linkages only with revolute pairs . Mechanism and Machine Theory 26(2): 197-206 .

16.

Gosselin, C. M., Vollmer, F., Côté, G., and Wu, Y. 2004. Synthesis and design of reactionless three-degree-of-freedom parallel mechanisms . IEEE Transactions on Robotics and Automation 20(2): in press.

17.

Hunt, K. H. 1978. Kinematic Geometry of Mechanisms, Oxford University Press, Oxford .

18.

Kochev, I. S. 1990a. General method for active balancing of combined shaking moment and torque fluctuations in planar linkages . Mechanism and Machine Theory 25(6): 679-687 .

19.

Kochev, I. S. 1990b. Full shaking moment balancing of planar linkages by a prescribed input speed fluctuation . Mechanism and Machine Theory 25(4): 459-466 .

20.

Kochev, I. S. 1992. Active balancing of the frame shaking moment in high speed planar machines . Mechanism and Machine Theory 27(1): 53-57 .

21.

Kochev, I. S. 2000. General theory of complete shaking moment balancing of planar linkages: a critical review . Mechanism and Machine Theory 35(11): 1501-1514 .

22.

Legnani, G., Zappa, B., Adamini, R., and Casolo, F. 1999. A contribution to the dynamics of free-flying space manipulators . Mechanism and Machine Theory 34(3): 359-372 .

23.

Lowen, G. G., Tepper, F. R., and Berkof, R. S. 1983. Balancing of linkages—an update . Mechanism and Machine Theory 18(3): 213-220 .

24.

Papadopoulos, E. and Abu-Abed, A. 1996. On the design of zero reaction manipulators . ASME Journal of Mechanical Design 118(3): 372-376 .

25.

Papadopoulos, E. and Dubowsky, S. 1991. Coordinated manipulator/spacecraft motion control for space robotic systems . Proceedings of the IEEE International Conference on Robotics and Automation, Sacramento, CA, pp. 1696-1701 .

26.

Ricard, R. and Gosselin, C. M. 2000. On the development of reactionless parallel manipulators . ASME 2000 Design Engineering Technical Conference and Computers and Information in Engineering Conference, Baltimore, MA.

27.

Ye, Z. and Smith, M. R. 1994. Complete balancing of planar linkages by an equivalence method . Mechanism and Machine Theory 29(5): 701-712 .

28.

Youcef-Toumi, K. and Asada, H. 1985. Design of arm linkages with decoupled and configuration-invariant inertia tensors . ASME Winter Annual Meeting, Robotics and Manufacturing Automation, Miami, FL, pp. 145-161 .

29.

Yu, Y.Q. 1987a. Research on complete shaking force and shaking moment balancing of spatial linkages . Mechanism and Machine Theory 22(1): 27-37 .

30.

Yu, Y. Q. 1987b. Optimum shaking force and shaking moment balancing of the RSSR spatial linkage . Mechanism and Machine Theory 22(1): 39-45 .

31.

Yu, Y. Q. 1988. Complete shaking force and shaking moment balancing of spatial irregular force transmission mechanisms using additional links . Mechanism and Machine Theory 23(4): 279-285 .