Abstract
In this paper we present a complete system for segmenting, matching, tracking, and visual servoing with respect to unknown planar contours. Our system can be used with arbitrary contours of any shape and without any prior knowledge of their models. The system is first shown the target view. A selected contour is automatically extracted and its image shape is stored. The robot and object are then moved and the system automatically identifies the target. The matching step is performed together with the estimation of the homography matrix between the two views of the contour. Then, a 2½D visual servoing technique is used to reposition the end-effector of a robot at the reference position relative to the planar contour. The system has been successfully tested on several contours with very complex shapes such as leaves, keys, and coastal outlines of islands. Experiments using a ship mock-up without any artificial marker proves that the system can be applied to the ship-building industry.
Get full access to this article
View all access options for this article.
References
Supplementary Material
Please find the following supplemental material available below.
For Open Access articles published under a Creative Commons License, all supplemental material carries the same license as the article it is associated with.
For non-Open Access articles published, all supplemental material carries a non-exclusive license, and permission requests for re-use of supplemental material or any part of supplemental material shall be sent directly to the copyright owner as specified in the copyright notice associated with the article.
