In the last two decades in particular, climbing and walking robots have been the subject of important research activity worldwide. However, the practical use of these robots is still limited and only a few are in actual use in live situations. In the general framework of the CLAWAR Thematic Network, several working groups have been established to formulate requirements, to define specifications and to investigate those aspects of climbing and walking robot technology that are more relevant with respect to selected application domains. The aim of this paper is to present an overview of the investigations carried out by the CLAWAR network, and to show various realizations that could offer a good picture of how to rise above the barriers to exploit this innovative class of robotic systems.
Get full access to this article
View all access options for this article.
References
1.
Abarinov, A. V.et al. 1989. A robotic system for moving over vertical surfaces . Soviet Journal of Systems Science27(3): 130-142 .
2.
Angle, C. M., and Brooks, R. A. 1990. Small planetary rovers . In Proc. IEEE/RSJ Int. Workshop on Intelligent Robots and Systems, Ikabara, Japan, pp. 383-388 .
3.
Arikawa, K., and Hirose, S. 1996. Development of quadruped walking robot TITAN VIII . In Proc. Int. Conf. on Intelligent Robots and Systems, Vol. 1, pp. 208-214 .
4.
Armada, M., González de Santos, P., Nieto, J., and Araujo, D. 1990. On the design and control of a self-propelling robot for hazardous environments . In Proc. 21st Int. Symposium on Industrial Robots, IFS, pp. 159-166 .
5.
Armada, M. 1991. Telepresence and intelligent control for a legged locomotion robot. In Expert Systems and Robotics, Springer Verlag, Berlin , pp. 377-396.
6.
Armada, M., and González de Santos, P. 1997. Climbing, walking and intervention robots . Industrial Robot24(2): 158-163 .
7.
Armada, M., González de Santos, P., and Jiménez, M. A. 1999. Evolution and perspectives of climbing and walking robots at the Industrial Automation Institute . In Proc. 2nd Int. Conf. on Climbing and Walking Robots and the Support Technologies for Mobile Machines, Portsmouth, UK, Professional Engineering Publishing, pp. 533-544 .
8.
Armada, M., González de Santos, P., Jiménez, M. A., and Prieto, M. 2000. From remotely controlled manipulators to tele-operation of advanced climbing and walking robots. In Tele-Robotic Applications, Professional Engineering Publishing , pp. 131-146.
9.
Armada, M., and González de Santos, P. 2001. Perspectives of climbing and walking robots for the construction industry In Proc. 3rd Int. Conf. on Climbing and Walking Robots and the Support Technologies for Mobile Machines, Karlsruhe, Germany, Professional Engineering Publishing, pp. 929-936 .
10.
Balaguer, C., Padrón, V., Giménez, A., Pastor, J., and Abderrahim, M. 1999. Path planning strategy of autonomous climbing robot for inspection applications in construction . In Proc. 16th IAARC/IFAC/IEEE Int. Symp. on Automation and Robotics in Construction, Madrid, Spain.
11.
Baudoin, Y., and Colon, E. 1999. Humanitarian deming and robotics—A difficult challenge . In Proc. 2nd Int. Conf. on Climbing and Walking Robots and the Support Technologies for Mobile Machines, Portsmouth, UK, Professional Engineering Publishing, pp. 911-921 .
12.
Berns, K., Albiez, J., Kepplin, V., and Hillenbrand, C. 2001. Airbug—insect-like machine actuated by fluidic muscle . In Proc. 3rd Int. Conf. on Climbing and Walking Robots and the Support Technologies for Mobile Machines, Karlsruhe, Germany, Professional Engineering Publishing, pp. 237-244 .
13.
Caldwell, D. G., and Warren, H. A. 2001. Is there a future for climbing and walking robotic systems in military operations? In Proc. 4th Int. Conf. on Climbing and Walking Robots and the Support Technologies for Mobile Machines, Karlsruhe, Germany, Professional Engineering Publishing, pp. 969-977 .
14.
Collie, A. 1992. Unusual robots . Industrial Robot19(4): 13-16 .
15.
Estremera, J., and González de Santos, P. 2003. Free gaits for quadruped robots over irregular terrain . International Journal of Robotics Research22(2): 115-130 .
16.
Fujita, M. 2001. AIBO: Toward the era of digital creatures . International Journal of Robotics Research20(10): 781-794 .
17.
Gálvez, J. A., Estremera, J., and González de Santos, P. 2000. SILO4—A versatile quadruped robot for research in force distribution . In Proc. 3rd Int. Conf. on Climbing and Walking Robots and the Support Technologies for Mobile Machines, Madrid, Spain, Professional Engineering Publishing, pp. 371-383 .
18.
García, E., Gálvez, J.A., and González de Santos, P. 2000. A mathematical model for real-time control of the SILO4 leg . In Proc. 3rd Int. Conf. on Climbing and Walking Robots and the Support Technologies for Mobile Machines, Madrid, Spain, Professional Engineering Publishing, pp. 447-459 .
19.
García, E., and González de Santos, P. 2001. Using soft computing techniques for improving foot trajectories in walking machines . Journal of Robotic Systems18(7): 343-356 .
20.
García, E. 2002. Stability and velocity optimization in walking machines. Ph.D. Thesis, Polytechnic University of Madrid.
21.
Giménez, A., Abderrahim, M., and Balaguer, C. 2001. Lessons from the ROMA I inspection robot . In Proc. 4th Int. Conf. on Climbing and Walking Robots and the Support Technologies for Mobile Machines, Karlsruhe, Germany, Professional Engineering Publishing, pp. 913-920 .
22.
González de Santos, P., Armada, M., Martin, A., and De Peuter, W. 1994. A survey of locomotion concepts for planetary exploration rovers . In Proc. 3rd ESA Workshop on Advance Space Technologies for Robot Applications, Noordwjck, The Netherlands.
23.
González de Santos, P.Armada, M., and Jiménez, M. A. 1997a. An industrial walking machine for naval construction . In IEEE Int. Conf. on Robotics and Automation, Albuquerque, NM.
24.
González de Santos, P., Armada, M., and Jiménez, M. A. 1997b. Walking machines. Initial testbeds, first industrial applications and new researches . Computing and Control Engineering Journal8(5): 345-353
25.
González de Santos, P., Armada, M., Estremera, J., and Jiménez, M. A. 1999. Walking machines for humanitarian demining . European Journal of Mechanical and Environmental Engineering44(2): 91-95 .
26.
González de Santos, P., Armada, M., and Jiménez, M. A. 2000. Ship building with ROWER . IEEE Robotics and Automation Magazine7(4): 35-43 .
27.
Hirose, S. 1986. Wall climbing vehicle using internally balanced magnetic unit . In Proc. 6th CISM-IFToMM Symposium—Romansy'86, Krakow, Poland, pp. 420-427 .
28.
Hirose, S., and Kawabe, K. 1998. Ceiling walk of quadruped wall climbing robot NINJA-II . In Proc. 1st Int. Symp. on Climbing and Walking Robots, Brussels, Belgium, pp. 143-147 .
29.
Howard, D., Zhang, S. J., Sanger, D. J., and Miao, S. 1997. Multi-legged walker design—The joint torque versus workspace compromise . Proc. ImechE211 (C).
30.
Ikeda, K. 1988. Basic study on a wall climbing robot (I) . Japanese Mechanical Engineering Laboratories Journal42(2): 117-128 .
31.
Ikeda, K. 1989. Basic study on a wall climbing robot (II) . Japanese Mechanical Engineering Laboratories Journal43(4): 183-194 .
32.
Kagami, S., Kabasawa, M., Okada, K., Matsuki, T., Matsumoto, Y., Konno, A., Inaba, M., and Inoue, H. 1998. Design and development of a legged robots research platform JROB-1 . In Proc. IEEE Int. Conf. on Robotics and Automation, Leuven, Belgium, pp. 146-151 .
33.
Kitano, H., Fujita, M., Zrehen, S., and Kageyama, K. 1998. Sony legged robot for robocup challenge . In Proc. IEEE Int. Conf. on Robotics and Automation, Leuven, Belgium, pp. 2605-2612 .
34.
Maza, M., Fontaine, J. G., Armada, M. A., González de Santos, P., Papantoniou, V., Mas, M. 1997. Wheel and legs—a new solution for traction enhancement without additive soil compaction . IEEE Robotics and Automation Magazine4(4): 26-33 .
35.
Nishi, A. 1996. Development of wall-climbing robots . Computers and Electrical Engineering22(2): 123-149 .
36.
Virk, G.S. 2001. Functionality modules—Specifications and details . In Proc. 4th Int. Conf. on Climbing and Walking Robots and the Support Technologies for Mobile Machines, Karlsruhe, Germany, Professional Engineering Publishing, pp. 275-282 .
37.
Virk, G. S. 2002. Consolidated CLAWAR State of the Art Report. Brite-EuRam BET2-546 Thematic Network CLAWAR: Climbing and Walking Robots and the Support Technologies for Mobile Machines .
38.
Warren, H. A. 2000. Technologies for transition from remote tele-operation to semi-autonomous control of unmanned ground vehicles . In Proc. 3rd Int. Conf. on Climbing and Walking Robots and the Support Technologies for Mobile Machines, Madrid, Spain, Professional Engineering Publishing, pp. 741-750 .
39.
Warren, H. A. 2002. CLAWAR Task 19—Barriers to commercial exploitation of mobile robotics . In Proc. 5th Int. Conf. on Climbing and Walking Robots and the Support Technologies for Mobile Machines, Paris, France, Professional Engineering Publishing, pp. 917-930 .
40.
Waterman, R. 1999. The use of walking and climbing machines in industry—A CLAWAR perspective . In Proc. 2nd Int. Symp. on Walking and Climbing Robots, Portsmouth, UK, Professional Engineering Publishing, pp. 749-761 .
41.
Xu, D., Liu, S., Zhau, D., and Wang, Y. 1999. Design of a wall cleaning robot with a single suction cup . In Proc. 2nd Int. Conf. on Climbing and Walking Robots and the Support Technologies for Mobile Machines, Portsmouth, UK, Professional Engineering Publishing, pp. 405-411 .
