Abstract
To make a walking machine more active and practical, reducing its weight without reducing its working ability is the key issue of design. A robot with many actuators that produce a function of a real animal's joint-base kinematics tends to be too heavy for a light-step animal-like walking. In this paper we propose the concept of reducing the number of actuators, which is extremely effective for reducing the weight of a walker. Considering the essence of walking locomotion, absolutely indispensable functions are an arbitrary movement of a swinging leg and some translation of the center of gravity to maintain balance. Seven actuators for a biped, four for a quadruped, six for a hexapod are the minimum numbers for essential functions. A six-actuator hexapod is realized by trial manufacturing. Furthermore, as a practical solution, more reduction is available by restricting walking functions. A five-actuator biped and a three-actuator quadruped are introduced in the experiments.
Get full access to this article
View all access options for this article.
References
Supplementary Material
Please find the following supplemental material available below.
For Open Access articles published under a Creative Commons License, all supplemental material carries the same license as the article it is associated with.
For non-Open Access articles published, all supplemental material carries a non-exclusive license, and permission requests for re-use of supplemental material or any part of supplemental material shall be sent directly to the copyright owner as specified in the copyright notice associated with the article.
