Design,Analysis and Control of a Wheeled Mobile Robot with a Nonholonomic Spherical CVT

Abstract

This article reports on the design, analysis and control of a new type of wheeled mobile robot based on a nonholonomic spherical continuously variable transmission (S-CVT). Our S-CVT based mobile robot is designed to increase the run time (i.e., the length of time in which the robot can be operated), and to achieve full planar accessibility with the design of a novel pivoting device that takes advantage of the flexibility of the S-CVT. We examine the sources of power loss in the S-CVT, in particular spin loss. For a quantitative analysis of spin loss of the S-CVT, we develop a friction model for the S-CVT, and perform an in-depth contact analysis based on the relative velocity field and normal pressure distribution. We also present a nonlinear shifting controller based on feedback linearization that takes into account the dynamics of the S-CVT. To evaluate the energy efficiency of our mobile robot and the performance of the S-CVT as a machine element, we perform experiments with a hardware prototype. The results are benchmarked numerically with a differential drive type mobile robot equipped with a reduction gear.

Keywords

continuously variable transmission spin loss feedback linearization mobile robot

Get full access to this article

View all access options for this article.

References

Borenstein J. , Everett H.R. , and Feng L. 1996. Where am I? Sensors and Methods for Mobile Robot Positioning , The University of Michigan.

Chang, W.S. , and Toumi, K.Y. 1998. Modeling of an omnidirectional high precision friction drive positioning stage. In Proc. of Inter. Conf. on Robotics and Automation, pp. 175-180, Leuven, Belgium.

Choi, Y. , Yeo, I. , and Kim, J. 1999. Technical Report: Trends of Continuously Variable Transmission , Technical Center, Daewoo Motor Company.

Chung, S. , and Han, D.C. 1996. Standards of Mechanical Design, Dongmyung-Sa , Korea.

Courtney-Pratt, J. , and Eisner, E. 1957. The effect of a tangential force on the contact of metallic bodies. Proc. of the Royal Society, vol. A238, pp. 529-550.

Dahl, P.R. 1977. Measurement of solid friction parameters of ball bearing . Proc. of the 6th Annual Symposium on Incremental Motion, Control Systems and Devices, pp. 49- 60, University of Illinois. 89-0148 B.

Jones, J.L. , and Flynn, A.M. 1993. Mobile Robots: Inspiration to Implementation. Massachusetts: A. K. Peters.

Kassakian, J.G. , Schlecht, M.F. , Verghese, G.C. 1991. Principles of Power Electronics, chap. 1-8. Cambridge, MA: Addison-Wesley.

Kato, K. 1990. Fundamentals and applications of friction drive. In Journal of the Japan Society for Precision Engineering, vol. 9, pp. 1602-1606.

10.

Khalil H.K. 1996. Nonlinear Systems, 2nd Ed., Prentice Hall.

11.

Kim, J. , Park, F.C. , Park, Y. , and Shizou, M. 2002. Design and analysis of a spherical continuously variable transmission. In Journal of Mechanical Design 124(1):21-29. ASME.

12.

Kim, J. , Yeom, H. , Park, F.C. 1999. MOSTS: A mobile robot with a spherical continuously variable transmission. In Proc. IEEE/RSJ Inter. Conf. on Intelligent Robots and Systems, vol. 3, pp. 1751-1756.

13.

Kobayashi, N. , Nonami, K. , and Yasuzumi, I. 1996. Attitude control of free-flying space robot with discrete time sliding mode control algorithm. In Transactions of the Society of Instrument and Control Engineers 32(8):1206-1211.

14.

Kurosawa, M.K. , Takahashi, M. , and Higuchi, T. 1998. Elastic contact conditions to optimize friction drive of surface acoustic wave motor. In Transactions on Ultrasonics, Ferroelectrics, and Frequency Control 45(5):1229-1237.

15.

Lee, H.S. , and Tomizuka, M. 1996. Robust motion controller design for high-accuracy positioning systems. In Transactions on Industrial Electronics 43(1):48-55.

16.

Leonhard, W. 1996. Control of Electrical Drives, chap. 1-9, 2nd ed. Braunschweig, Germany: Springer.

17.

Loewenthal, S.H. et al. 1981. Evaluation of a high performance fixed-ratio traction drive. In Transactions of the ASME, vol. 103.

18.

Moore, C.A. 1997. Continuously Variable Transmission for Serial Link Cobot Architectures, M.Sc. Thesis, Northwestern University.

19.

Moore, C.A. , Peshikin, M.A. , Colgate, J.E. 1999. Design of a 3R cobot using continuously variable transmission . In IEEE International Conference on Robotics and Automation, Detroit, Michigan, pp. 3249-3254.

20.

Moronuki, N. , and Furukawa, Y. 1988. On the design of precise feed mechanism by friction drive . In Journal of the Japan Society for Precision Engineering , vol. 11, 2113- 2118.

21.

Nakamura, Y. , Chung, W. , and Sørdalen, O.J. 2001 Design and control of the nonholonomic manipulator. In IEEE Transactions on Robotics and Automation 17(1):48-59.

22.

Neīmark, N.I. , and Fufaev, N.A. 1972. Dynamics of nonholonomic systems. In Translations of Mathematical Monographs, vol. 33, American Mathematical Society.

23.

Singh, T. , and Nair, S.S. 1992. A mathematical review and comparison of continuously variable transmissions. In Transactions of SAE, No. 922107.

24.

Slotine, J.E. , and Li, W. 1991. Applied Nonlinear Control, Prentice Hall.

25.

Tanaka, H. et al. 1989. Spin moment of a thrust ball bearing in traction fluid. In Journal of JSME.

26.

Timoshenko, S. , and Goodier, J.N. 1951. Theory of Elasticity, 2nd Ed., McGraw-Hill Book Co.

27.

U. S. Department of Energy. 1982. Advanced Automotive Transmission Development Status and Research Needs, DOE/CS/50286-1.

28.

Wang, B.T. , and Fries, R.H. 1989. Determination of creep force, moment, and work distribution in rolling contact with slip. In Transactions of the ASME, vol. 111.

29.

Weast, R.C. , Astle, M.J. , and Beyer, W.H. 1987. CRC Handbook of Chemistry and Physics, 6 8th ed. Boca Raton, Florida: CRC Press, Inc.