The German end-of-life vehicle take-back system is described and analyzed in terms of its impact on the environment and the car companies involved. It is concluded that although this system is often cited as an example of a successful take-back scheme, it is not one that maximizes the value recovered from end-of-life vehicles. As a result, corporations do not achieve the potential benefits that can be realized from an alternate value chain based on recovering value from end-of-life products. Neither is society benefiting from the potential reduction in pollution and from making its way of life more sustainable. Without bringing these potential benefits to all stakeholders, the system is not likely to have a future.
ARGE-Altauto. (2000, March 31). Arbeitsgemeinschaft Altauto 1st monitoring report (Reporting period: April 1, 1998, to March 31,2000). Presented to the German federal government.
2.
Bellmann, K., & Khare, A. (1999). European response to issues in recycling car plastics. Technovation, 19, 721-734.
3.
Das, S., & Curlee, T. R. (1999). Recycling of new generation vehicles. Vehicle recycling, regulatory, policy, and labeling issues. Warrendale, PA: Society of Automotive Engineers.
4.
Den Hond, F. (1998). The “similarity” and “heterogeneity” theses in studying innovation: Evidence from the end-of-life vehicle case. Technology Analysis & Strategic Management, 10(4), 529-543.
5.
Duranceau, C., & Lindell, T. (1999). Automotive recycling as reuse: Investigation to establish the contribution of reuse on recyclability. Vehicle recycling, regulatory, policy, and labeling issues. Warrendale, PA: Society of Automotive Engineers.
6.
Furrer, P. (1995). Recycling of aluminum in cars: Today and tomorrow. Proceedings of the 1995 Total Life Cycle Conference, 93-96.
7.
Goldmann, D. (1995). Recycling network for scrap cars: An economical tool to solve an ecological problem. Proceedings of the 1995 Total Life Cycle Conference, 65-69.
8.
Henstock, M. E. (1998). Design for recyclability. London: Brookfield.
9.
Hoock, R. S. (1999). Mechanical recycling of plastics from end-of-life vehicles-scope and limitations: Summary of the PRAVDA 2 Project. Frankfurt, Germany: VDA and VKE.
10.
Lohse, J., Sander, K., & Wulf-Schnabel, J. (n.d.). Anforderungen an das Monitoring im Rahmen der Verwertung langlebiger, technisch komplexer Produkte am Beispiel des Altautos[Requirements for monitoring with respect to recycling of long-lasting, technically complex products using the example of end-of-life vehicles]. Hamburg, Germany: Institut für Ökologie und Politik.
11.
Lucas, R. (2001). End-of-life vehicle regulation in Germany and Europe: Problems and perspectives (Wuppertal Papers No. 113). Discussion paper of the Project “Autoteile per Mausklick” financed by the QUATRO-Programme. Wuppertal Institut für Klima, Umwelt, Energie.
12.
Nakajima, N. (2004). Exploring the potential of preventive approaches to converge business interests with environmental sustainability. Doctoral thesis, Department of Mechanical and Industrial Engineering, University of Toronto, Toronto, Ontario, Canada.
13.
Nakajima, N., & Vanderburg, W. H. (2005). A failing grade for our efforts to make our civilization more environmentally sustainable. Bulletin of Science, Technology & Society, 25(2), 129-144.
14.
Ng, G. K., Miller, J. C., & Tessieri, M. B. (1999). Aluminum usage in the PNGV: Its impact on the recycling infrastructure. Vehicle recycling, regulatory, policy, and labeling issues. Warrendale, PA: Society of Automotive Engineers.
15.
Püchert, W., & Conradt, R. (1994). Economic issues in recycling end-of-life vehicles. Technovation, 20, 677-690.
16.
RECAP. (1997). Recovery and reuse of plastic materials derived from automobile production and scrapping (Final report, Eureka Project). Milan, Italy: Author.
17.
Schenk, M. (1998). Automobilrecycling. Deutschen Universitäts-Verlag, Germany.
18.
Smart Product Systems. (n.d.). The resource cycle (Slide show). Technical University of Delft, Netherlands.
19.
Staudinger, J., & Keoleian, G. A. (2001). Management of end-of-life vehicles (ELVs) in the U.S. (Rep. No. CSS01-01). Ann Arbor, MI: Center for Sustainable System, University of Michigan.
20.
Tessieri, M. (1997, May). Overview of automotive aluminum scrap recycling in North America. Alumitech ‘97 Proceedings (2nd International Aluminum Conference and Trade Exposition). Atlanta, GA.
21.
Vanderburg, W. H. (2000). The labyrinth of technology. Toronto, Ontario, Canada: University of Toronto Press.
22.
Zoboli, R., Barbiroli, G., Leoncini, R., Mazzanti, M., & Montresor, S. (2000). The impact of EU regulation on innovation of European industry: Regulation and innovation in the area of end-of-life vehicles. Milan, Italy: The European Commission JRCIPTS and Enterprise DG.
