Cardioplegia heat exchanger design modelling using computational fluid dynamics

Abstract

A new cardioplegia heat exchanger has been developed by Sorin Biomedica. A three-dimensional computer-aided design (CAD) model was optimized using computational fluid dynamics (CFD) modelling. CFD optimization techniques have commonly been applied to velocity flow field analysis, but CFD analysis was also used in this study to predict the heat exchange performance of the design before prototype fabrication. The iterative results of the optimization and the actual heat exchange performance of the final configuration are presented in this paper. Based on the behaviour of this model, both the water and blood fluid flow paths of the heat exchanger were optimized. The simulation predicted superior heat exchange performance using an optimal amount of energy exchange surface area, reducing the total contact surface area, the device priming volume and the material costs. Experimental results confirm the empirical results predicted by the CFD analysis.

Get full access to this article

View all access options for this article.

References

Miyazoe Y , Sawairi T , Ito K , Yana J. Development of the small caliber centrifugal blood pump . Artif Organs 1998; 22: 461-465 .

Inzoli F , Di Martino E , Dubini G , Redaelli A , Fumero R. A new pulsatile blood pump for adult cardiopulmonary bypass: design criteria and preliminary fluid dynamic evaluation . Artif Organs 1996; 19: 359-366 .

Anderson JD Jr. Computational fluid dynamics, the basics with applications. New York: McGraw-Hill , 1995.

Webb RL. Principles of enhanced heat transfer. New York: John Wiley , 1994.