GuoZSangLWangZ, et al.Deposition of copper thin films by plasma enhanced pulsed chemical vapor deposition for metallization of carbon fiber reinforced plastics. Surf Coat Technol2016; 307: 1059–1064.
2.
MaurerCSchulzU. Erosion resistant titanium based PVD coatings on CFRP. Wear2013; 302: 937–945.
3.
MaurerCSchulzU. Solid particle erosion of thick PVD coatings on CFRP. Wear2014; 317: 246–253.
4.
RezzougAAbdiSKaciA, et al.Thermal spray metallisation of carbon fibre reinforced polymer composites: effect of top surface modification on coating adhesion and mechanical properties. Surf Coat Technol2018; 333: 13–23.
5.
CheHVoPYueS. Metallization of carbon fibre reinforced polymers by cold spray. Surf Coat Technol2017; 313: 236–247.
6.
ArchambaultGJodoinBGaydosS, et al.Metallization of carbon fiber reinforced polymer composite by cold spray and lay-up molding processes. Surf Coat Technol2016; 300: 78–86.
7.
SaitoH, et al.Direct copper metallization of carbon fiber-reinforced thermoplastic polymers for lightning strike protection using low-pressure cold spray. J Therm Spray Technol2025; 34: 231–249.
8.
de JuanSGordoEJiménez-MoralesA, et al.Response of electroless copper coated CFRP laminates to emulated lightning strikes. Compos A Appl Sci Manuf2021; 140: 106184.
9.
ChenJHsuY-IAsohT-A, et al.Surface modification of carbon-fiber-reinforced plastic by using photo-activated chlorine dioxide radicals as pretreatment of electroless plating. Surf Interf2023; 37: 102644.
10.
KishiNMatsushimaHUedaM. Carbon fiber-reinforced plastic surface modification by Al electroplating in AlCl3–EmImCl ionic liquids. Electrochem2025; 93: 25‐00008.
11.
WangYWangJLiuZ, et al.Nanocone-shaped Ni-electroplated carbon fiber composite films for electromagnetic shielding applications. J Mater Res Technol2023; 27: 4625–4632.
12.
RafailovićLD, et al.Selective Cu electroplating enabled by surface patterning and enhanced conductivity of carbon fiber reinforced polymers upon air plasma etching. J Alloys Compd2024; 992: 174569.
13.
OliveiraVSharmaSPde MouraMFSF, et al.Surface treatment of CFRP composites using femtosecond laser radiation. Opt Lasers Eng2017; 94: 37–43.
14.
DightonCRezaiAOginSL, et al.Atmospheric plasma treatment of CFRP composites to enhance structural bonding investigated using surface analytical techniques. Int J Adhes Adhes2019; 91: 142–149.
15.
MundMLippkyKBlassD, et al.Influence of production based surface topography and release agent amount on bonding properties of CFRP. Compos Struct2019; 216: 104–111.
16.
FallahPAlidokhtSAVoP, et al.Properties of multilayered metallic coatings deposited on carbon fiber-reinforced polymers (CFRPs) through electrochemical and cold spray processes. J Therm Spray Technol2023; 32: 234–248.
17.
ChenJHsuY-IAsohT-A, et al.Surface modification of carbon-fiber-reinforced plastic by using photo-activated chlorine dioxide radicals as pretreatment of electroless plating. Surf Interf2023; 37: 102644.
18.
FantuzziNDibABabamohammadiS, et al.Mechanical analysis of a carbon fibre composite woven composite laminate for ultra-light applications in aeronautics. Compos C Open Access2024; 14: 100447.
19.
KimHKimJLeeJ, et al.Thermal barrier coating for carbon fiber-reinforced composite materials. Compos B Eng2021; 225: 109308.
20.
QiangXWangKJiangX, et al.Effect of fireproof coatings on the post-fire behavior of CFRP composite sheets. Appl Sci2023; 13: 10369.
21.
BourbigotSGardelleBDuquesneS. Intumescent silicone-based coatings for the fire protection of carbon fiber reinforced composites. Fire Safety Sci2014; 11: 781–793.
22.
LiuAGuoMGaoJ, et al.Influence of bond coat on shear adhesion strength of erosion and thermal resistant coating for carbon fiber reinforced thermosetting polyimide. Surf Coat Technol2006; 201: 2696–2700.
23.
SemmlerCGyoktepeliler-AkinEKillingerA. Plasma sprayed ceramic coatings for the thermal protection of carbon fiber reinforced plastics (CFRP): thermal and mechanical properties of YSZ, aluminum titanate, cordierite and mullite coatings. Surf Coat Technol2023; 462: 129509.
24.
JuL, et al.A hybrid ceramic-polymer composite fabricated by co-curing lay-up process for a strong bonding and enhanced transient thermal protection. Ceram Int2018; 44: 11497–11504.
25.
DelkowskiMSmithCTGAnguitaJV, et al.Radiation and electrostatic resistance for ultra-stable polymer composites reinforced with carbon fibers. Sci Adv2023; 9: eadd6947. doi: 10.1126/sciadv.add6947
26.
XuL, et al.Development of grid-reinforced carbon fiber mirrors using high-precision optical replication technology. Opt Eng2018; 57: 093110.
