Lock SulenW, et al.Improvement of the deposition efficiency and adhesion strength of cold sprayed fluoropolymer coating by laser surface texturing of the substrate. Surf Coat Technol2024; 478: 130489.
5.
MuthulingamJ, et al.Molecular weight controls interactions between plastic deformation and fracture in cold spray of glassy polymers. ACS Omega2023; 8: 3956–3970.
6.
MuthulingamJSinghNKJhaR,et al.Modeling cold spray deposition of thermoplastic polymers: effects of impact angle and temperature. In: Proceedings of the American Society for Composites—37th Technical Conference, ASC 2022, 2022 [Online].
7.
KhalkhaliZRothsteinJP. Characterization of the cold spray deposition of a wide variety of polymeric powders. Surf Coat Technol2020; 383: 125251.
8.
RaviKSulenWLBernardC, et al.Fabrication of micro-/nano-structured super-hydrophobic fluorinated polymer coatings by cold-spray. Surf Coat Technol2019; 373: 17–24.
9.
Sundara RajanKRothsteinJP. Cold spray deposition of high-density polyethylene polymer particles on metal substrates. J Therm Spray Technol2022; 31: 1765–1775.
10.
GnedenkovASNomerovskiiADTsvetnikovAK, et al.Cold-sprayed composite metal-fluoropolymer coatings for alloy protection against corrosion and wear. Materials2023; 16: 918.
11.
SinghNKUddinKZMuthulingamJ, et al.Analyzing the effects of particle diameter in cold spraying of thermoplastic polymers. J Therm Spray Technol2021; 30: 1226–1238.
12.
BushTBKhalkhaliZChampagneV, et al.Optimization of cold spray deposition of high-density polyethylene powders. J Therm Spray Technol2017; 26: 1548–1564.
13.
TanKMarkovychSHuW, et al.On the characteristics of cold spray technology and its application in aerospace industries. IOP Conf Ser Earth Environ Sci2021; 719: 032023.
14.
RaviKIchikawaYDeplanckeT, et al.Development of ultra-high molecular weight polyethylene (UHMWPE) coating by cold spray technique. J Therm Spray Technol2015; 24: 1015–1025.
15.
BachaTWBrennanDATiitmaÜ, et al.Effects of powder feedstock pre-heating on polymer cold spray deposition. J Therm Spray Technol2023; 32: 488–501.
16.
Sundara RajanKRothsteinJP. Cold spray deposition of high-density polyethylene polymer particles on metal substrates. J Therm Spray Technol2022; 31: 1765–1775.
17.
KhalkhaliZRajanKSRothsteinJP. Peening effect of glass beads in the cold spray deposition of polymeric powders. J Therm Spray Technol2020; 29: 657–669.
18.
RaviKIchikawaYOgawaK, et al.Mechanistic study and characterization of cold-sprayed ultra-high molecular weight polyethylene-nano-ceramic composite coating. J Therm Spray Technol2016; 25: 160–169.
19.
TillmannWZajaczkowskiJF. Investigation of low-pressure cold-gas dynamic spraying of polyamide-12 (PA12) on steel surfaces. IOP Conf Ser Mater Sci Eng2019; 480: 012009.
