SiCf/SiC-Ti3SiC2 composites with different Ti3SiC2 contents were prepared by slurry impregnation and in-situ reaction in this study. Microstructure analysis showed that the matrix of the coposites was mainly composed of Ti3SiC2, SiC, TiSi2 and little amount of residual Si and C. The composites achieved the highest mechanical performance when the Ti3SiC2 content was the highest. The high-temperature oxidation results indicated that even after 100 h of oxidation at 1300°C, the bending strength of the composite material can still maintain 83% of its initial strength compared to other composites. This may be due to the formation of SiO2 and TiO2 oxide layers by partial oxidation of Ti3SiC2 in the matrix, which will protect the composite material from further oxidation.
MorscherGNCawleyJD. Intermediate temperature strength degradation in SiC/SiC composites. J Eur Ceram Soc2002; 22: 2777–2787.
2.
DuanSCZhuDMJiaHY, et al.Enhanced mechanical and dielectric properties of SiCf/SiC composites with silicon oxycarbide interphase. Ceram Int2018; 44: 631–637.
LiMZhouXBYangH, et al.The critical issues of SiC materials for future nuclear systems. Scripta Mater2018; 143: 149–153.
5.
SunXNYinXWFanXM, et al.Oxidation resistance of SiC/SiC composites containing SiBC matrix fabricated by liquid silicon infiltration. J Eur Ceram Soc2018; 38: 479–485.
6.
YangHTLuZLBieBX, et al.Microstructure and damage evolution of SiCf/PyC/SiC and SiCf/BN/SiC mini-composites: a synchrotron X-ray computed microtomography study. Ceram Int2019; 45: 11395–11402.
7.
WhitmarshCKInterranteLV. Carbosilane polymer precursors to silicon carbide ceramics. U.S. 5153295, 1992-10-6.
8.
KohyamaAKotaniMKatohY, et al.High-performance SiCf/SiC composites by improved PIP processing with new precursor polymers. J Nucl Mater2000; 283-287: 565–569.
9.
FitzerEHegenD. Chemical vapor deposition of silicon carbide and silicon nitride-chemistry's contribution to modern silicon ceramics. Angew Chem Int Ed1979; 18: 295–304.
10.
LamourouxFBourratXSevelyJ,et al.Structure/oxidation behavior relationship in the carbonaceous constituents of 2D-C/PyC/SiC composites. Carbon N Y1993; 31: 1273–1288.
11.
SuyamaSKamedaTItohY. Development of high-strength reaction-sintered silicon carbide. Diam Relat Mater2003; 12: 1201–1204.
12.
SayanoASutohCSuyamaS, et al.Development of a reaction-sintered silicon carbide matrix composite. J Nucl Mater1999; 271-272: 467–471.
13.
LeeSPKatohYKohyamaA. Microstructure analysis and strength evaluation of reaction sintered SiCf/SiC composties. Scripta Mater2001; 44: 153–157.
14.
ZhangJWuTWangL, et al.Microstructure and properties of Ti3SiC2/SiC nanocomposites fabricated by spark plasma sintering. Compos Sci Technol2008; 68: 499–505.
15.
LenzFKrenkelW. Fabrication of fiber composites with a MAX phase matrix by reactive melt infiltration. IOP Conf Ser Mater Sci Eng2011; 18: 202030.
16.
LiSBXieJXZhangLT, et al.Mechanical properties and oxidation resistance of Ti3SiC2/SiC composite synthesized by in situ displacement reaction of Si and TiC. Mater Lett2003; 57: 3048–3056.
17.
FanXMYinXWZhangL, et al.Processing, microstructure and ablation behavior of C/SiC–Ti3SiC2 composites fabricated by liquid silicon infiltration. Corros Sci2013; 74: 98–105.
18.
FanXMYinXWZhangL, et al.Fabrication of Ti3SiC2 modified C/C-SiC composites by liquid silicon infiltration. Acta Materiae Compositae Sinica2012; 29: 104–110.
19.
ZhangJFWangLJWanJ, et al.High temperature oxidation behavior and mechanism of Ti3SiC2–SiC nanocomposites in air. Compos Sci Technol2008; 68: 1531–1538.
20.
BarsoumMWHo-DucLHRadovicM, et al.Long time oxidation study of Ti3SiC2, Ti3SiC2/SiC, and Ti3SiC2/TiC composites in air. J Electro Chem Soc2003; 150: B166–B175.
21.
YaghobizadehOSedghiABaharvandiHR. Mechanical properties and microstructure of the C-C-SiC, C-C-SiC-Ti3SiC2 and C-C-SiC-Ti3Si(Al)C2 composites. Mater Sci Eng A2018; 731: 446–453.
22.
CaoMSSongWLHouZL, et al.The effects of temperature and frequency on the dielectric properties, electromagnetic interference shielding and microwave-absorption of short carbon fiber/silica composites. Carbon N Y2009; 48: 788–796.
23.
FanXM. Investigation on the properties of Ti3SiC2 modified C/SiC composites. PhD dissertation, Northwestern Polytechnical University, Xi'an, 2015.
24.
WuPFLiuYXuSW, et al.Mechanical properties and strengthening mechanism of SiCf/SiC mini-composites modified by SiC nanowires. Ceram Int2021; 47: 1819–1828.
25.
ShiYXiuYLKochD. Investigation of statistical distribution of C/C-SiC composite's mechanical properties. Key Eng Mater2019; 809: 131–139.
26.
YaghobizadehOSedghiABaharvandiHR. Investigation of the effect of various parameters on the amount and morphology of nano-laminate MAX phase in cf-C-SiC-Ti3SiC2 composite. Int J Refract Met Hard Mater2018; 71: 292–300.
27.
ZhouYRJiaoJJiangZY, et al.Toughening mechanisms of Ti3SiC2-and TiB2-toughened SiC matrix prepared via reactive melt infiltration. J Mater Res2021; 36: 4963–4973.
28.
KeroITegmanRAnttiML. Effect of the amounts of silicon on the in situ synthesis of Ti3SiC2 based composites made from TiC/si powder mixtures. Ceram Int2010; 36: 375–379.
29.
FanXMYinXWMaYZ, et al.Oxidation behavior of C/SiC-Ti3SiC2 at 800–1300°C in air. J Eur Ceram Soc2016; 36: 2427–2433.
30.
SunGLYinHFDongLB, et al.Study on high temperature oxidation resistence of Ti3SiC2 /SiC composites. Bull Chin Ceram Soc (in Chinese)2011; 5: 1019–1021.
