This work thoroughly investigated the electrochemical corrosion behaviors of Cu-14Fe-(0, 0.05) Ce alloys. Experimental findings revealed that the addition of Ce did not change the phase constituent, but refined α-Fe phase particle from 0.30 ± 0.04 to 0.22 ± 0.03 μm and increased its content from 1.24% to 2.17%. With the increase of corrosion time, adding Ce could increase the linear polarization resistance by up to 3 times, and correspondingly the corrosion rate was reduced to half. Moreover, Ce addition contributed to the densification of corrosion products. The α-Fe phase preferentially underwent anodic dissolution reaction, generating corrosion product Fe2O3. The increase of soaking time resulted in the occurrence of anodic dissolution of Cu-matrix phase, along with the formation of Cu2O and Cu2Cl(OH)3.
LiuZZZhangQWZhangBW, et al.Investigation on mechanical properties and corrosion behavior of laser powder bed fusion 70/30 copper-nickel alloy. Corrosion Science2024; 232: 112040.
2.
ZarebidakiASayarPT. Long-term corrosion behavior of Cu-10Ni and Cu-20Ni alloys in simulated seawater. Journal of Materials Engineering and Performance2024. 10.1007/s11665-023-09048-0
3.
WuLMaALYanDJ, et al.Effect of Pre-immersion Temperature on Corrosion Product Films and Their Erosion Corrosion Resistance on 90/10 and 70/30 Copper-Nickel Tubes in 1 wt.% NaCl Solution. Journal of Materials Engineering and Performance2024. 10.1007/s11665-024-09216-w
4.
HuangSNiuWYHuaFA, et al.Effect of cryorolling on microstructure evolution and mechanical properties of spray deposited Cu-Fe alloy. Journal of Alloys and Compounds2024; 984: 173996.
5.
YuXYRenJWGuKH, et al.Synergistic improvement of mechanical properties and electrical conductivity of Cu-Fe alloys by rare earth metals Sc and Y addition. Journal of Alloys and Compounds2024; 979: 173569.
6.
XuJGuanBFuR, et al.Tailoring the microstructure and mechanical properties of Cu–Fe alloy by varying the rolling path and rolling temperature. Journal of Materials Research and Technology2023; 27: 182–193.
7.
BorisovYSVigilianskaNVIantsevitchCV,et al.Corrosion resistance of pseudoalloy copper-iron coatings obtained by electric arc spraying. Materials Science2023; 59: 223–227.
8.
XuJGuanBFuR, et al.The effect of multi-directional compression on mechanical properties and corrosion properties of Cu–Fe composite. Journal of Materials Research and Technology2024; 28: 1497–1503.
9.
GuanBLiXXuJ, et al.Mechanical and corrosion behavior of a composite gradient-structured Cu-Fe alloy. Metals2023; 13: 1304.
10.
NakagawaY. Liquid immiscibility in copper-iron and copper-cobalt systems in the supercooled state. Acta Metallurgica1958; 6: 704–711.
11.
MoonHJYeoTMLeeSH, et al.Effect of Zr addition on metastable liquid-liquid phase separation of Cu-Fe alloys. Scripta Materialia2021; 205: 114218.
12.
DebarajSBiswajitMAtulS, et al.Study on the composition effect upon the microstructure development in Cu-Fe alloys prepared using a W-wire method. Materials Characterization2023; 199: 112768.
13.
YangJZBuKZhouYJ, et al.Microstructure, residual stress, and mechanical properties evolution of a Cu–Fe–P alloy under different conditions. Journal of Materials Research and Technology2023; 24: 7896–7909.
14.
LiuSCJieJCGuoZK, et al.A comprehensive investigation on microstructure and magnetic properties of immiscible cu-Fe alloys with variation of Fe content. Materials Chemistry and Physics2019; 238: 121909.
15.
LiuSCJieJCDongBW, et al.Novel insight into evolution mechanism of second liquid-liquid phase separation in metastable immiscible Cu-Fe alloy. Materials & Design2018; 156: 71–81.
16.
ZhouCTongYGHuYL, et al.Interactions between hard phase, twins and dislocations strengthen dual-phase Cu-Fe alloys. Materials Today Communications2024; 38: 108238.
17.
SahooDPaliwalMSrivastavaA, et al.Study on the composition effect upon the microstructure development in Cu-Fe alloys prepared using aerodynamic levitation. Materials Today Communications2023; 37: 107288.
18.
QiuYTRenPWenCY, et al.High-temperature oxidation behavior of Cu-Fe-based immiscible alloy produced by laser powder bed fusion. Corrosion Science2024; 226: 111637.
19.
WangMYangQRJiangYB, et al.Effects of Fe content on microstructure and properties of Cu–Fe alloy. Transactions of Nonferrous Metals Society of China2021; 31: 3039–3049.
20.
LiuSCXuSSJieJC, et al.Microstructure evolution and magnetic properties of metastable immiscible Cu-Fe alloy with micro-alloying B element. Journal of Alloys and Compounds2021; 888: 161627.
21.
YueSPQuJPLiGL, et al.A comprehensive investigation of carbon micro-alloying on microstructure evolution and properties of metastable immiscible Cu-Fe alloy. Journal of Alloys and Compounds2022; 921: 166163.
22.
LuoXZengHYuanDW, et al.Effect of the rare earth element Ce on the microstructure, properties and thermal stability of Cu-5Fe alloy. Materials Today Communications2023; 36: 106824.
23.
LiHHZhangSHChenY, et al.Effects of small amount addition of rare earth ce on microstructure and properties of cast pure copper. Journal of Materials Engineering and Performance2015; 24: 2857–2865.
24.
WangWYPanQLWangXD, et al.Improved heat and corrosion resistance of high electrical conductivity Al-Mg-Si alloys by multi-alloying of Ce, Sc and Y. Corrosion Science2024; 226: 111695.
25.
GuanQZhongFShaJB. Effect of Ce addition on hot corrosion behaviours of a cast γ′-strengthened Co–Al–W–Mo–Ta–B alloy at 800°C. Progress in Natural Science: Materials International2022; 32: 463–471.
26.
ZhangZCLanADZhangM, et al.Effect of Ce on the pitting corrosion resistance of non-equiatomic high-entropy alloy Fe40Mn20Cr20Ni20 in 3.5wt% NaCl solution. Journal of Alloys and Compounds2022; 909: 164641.
27.
YueSPQuJPLiGL, et al.A comprehensive investigation of carbon micro-alloying on microstructure evolution and properties of metastable immiscible Cu-Fe alloy. Journal of Alloys and Compounds2022; 921: 166163.
28.
ZhangCZChenCGLiuXH, et al.High strength and high electrical conductivity in Cu–Fe alloys with nano and micro Fe particles. Materials Science and Engineering: A2022; 143948: 855.
29.
LuoXWangLHYuanDW, et al.Influences of Sn on Fe phase segregation and properties of Cu-5Fe alloy. Materials Science and Technology2023; 39: 2191–2204.
30.
RogalŁ. Semi-solid processing of the CoCrCuFeNi high entropy alloy. Material & Design2017; 119: 406–416.
31.
PourshadlooMJameelMFRomero-ParraRM, et al.Synthesis of TiO2/rGO composite coatings on titanium alloys with enhanced anticorrosion performance in palmitic acid-incorporated physiological solutions. Ceramics International2023; 49: 33598–33606.
32.
WangJYLiuLWYangM, et al.Modification effect of graphene oxide on oxidation coating of Ti-3Zr-2Sn-3Mo-25Nb near-β titanium alloy. Journal of Alloys and Compounds2022; 901: 163561.
33.
NiXQKongDCDongCF. Corrosion of Copper with Nickel or Zinc Addition in a Typical Marine Atmospheric Environment. Journal of Materials Engineering and Performance2023. 10.1007/s11665-023-08778-5
34.
LuJCWangZBHuHX, et al.Understanding localized corrosion mechanism of 90/10 copper-nickel alloy in flowing NaCl solution induced by partial coverage of corrosion products films. Corrosion Science2024; 227: 111716.
35.
LiuHXZhangWQZhaoZL, et al.Broken passive film and subsequent pitting corrosion behavior of 2205 duplex stainless steel induced by marine fungus Aspergillus terreus in artificial seawater. Corrosion Science2023; 218: 111147.
36.
YangYZengHTXinSS, et al.Electrochemical corrosion behavior of 2205 duplex stainless steel in hot concentrated seawater under vacuum conditions. Corrosion Science2020; 165: 108383.
37.
MaALJiangSLZhengYG, et al.Corrosion product film formed on the 90/10 copper–nickel tube in natural seawater: composition/structure and formation mechanism. Corrosion Science2015; 91: 245–261.
38.
YangRWenJBZhouYJ, et al.An investigation of the corrosion mechanisms of Cu-7Ni-3Al-1Fe-1Mn alloy in chloride-containing environment. Journal of Materials Engineering and Performance2019; 28: 2866–2872.
39.
Metikoš-HukovićMBabićRŠkugorI, et al.Copper–nickel alloys modified with thin surface films: corrosion behaviour in the presence of chloride ions. Corrosion Science2011; 53: 347–352.
40.
WeiXDongCFYiP, et al.Electrochemical measurements and atomistic simulations of Cl−-induced passivity breakdown on a Cu2O film. Corrosion Science2018; 136: 119–128.
