Micro-arc oxidation coatings were prepared on the surface of TC4 by adding different contents of rare-earth compound Pr(NO3)3 to the aluminate and phosphate-based electrolyte. The results showed that the change in oxidation voltage increased at first and then decreased with the raised of Pr(NO3)3 addition. At 0.05 g L−1, the oxidation voltage reached the maximum, the number of discharge micropores decreased, while the size increased, the thickness and hardness of the coatings reached the peak values. The coatings mainly included Al2TiO5, anatase, γ-Al2O3 and a little of Pr2O3. Pr(NO3)3-doped coatings showed excellent corrosion resistance in 3.5% NaCl electrochemical workstation and oilfield simulation fluid containing 5% NaCl, and the corrosion resistance of the coatings reached the best at 0.05 g L−1.
VolozhYAAbukovaLARybalchenkoVV, et al.Formation of oil and gas fields in deep hydrocarbon systems: outline of a universal search concept. Geotectonics2022; 56: 586–606.
2.
KawanoTEguchiKIshiguroY, et al.Passivity of martensite-based stainless steel oil country tubular goods in sour environment. Corrosion2016; 72: 1556–1564.
3.
MubarakGElkhodbiaMGadalaI, et al.Failure analysis, corrosion rate prediction, and integrity assessment of J55 downhole tubing in ultra-deep gas and condensate well. Eng Failure Anal2023; 151: 107381.
4.
ZhuSDWangKMaHX, et al.Adsorption characteristics between Ti atoms of TiO2(100) and corrosive species of CO2-H2S-Cl− system in oil and gas fields. Materials2023; 16: 3129.
5.
LiuQLiNShenZX, et al.Calculation model and experimental study of the collapse strength of titanium alloy tubing and casing. Sci Rep2022; 12: 1–14.
6.
PustodeMDRajaVSDewanganB, et al.Effect of long term exposure and hydrogen effects on HSSCC behaviour of titanium alloy IMI 834. Mater Des2015; 86: 841–847.
7.
KhayatanNGhasemiHMAbediniM. Synergistic erosion-corrosion behavior of commercially pure titanium at various impingement angles. Wear2017; 380–381: 154–162.
8.
YumakNAslantasK. A review on heat treatment efficiency in metastable beta titanium alloys: the role of treatment process and parameters. J Mater Res Technol2020; 9: 15360–15380.
9.
MiahMHSingh ChandDMalhiGS, et al.Influence of laser scanning power on microstructure and tribological behavior of Ni-composite claddings fabricated on TC4 titanium alloy. Aircr Eng2023; 95: 1165–1171.
10.
WangPXiaoYTZhouZH, et al.Effect of MgO microparticles on characteristics of microarc oxidation coatings fabricated on pure titanium. Int J Electrochem Sci2019; 14: 287–300.
11.
DouJHChenYYuHJ, et al.Research status of magnesium alloys by micro-arc oxidation: A review. Surf Eng2017; 33: 731–738.
12.
DudarevaNZaynullinaLKiselevaS, et al.The influence of alloy microstructure on corrosion resistance and other properties of coatings formed by microarc oxidation. Mater Chem Phys2022; 288: 126379.
13.
WheelerJMCollierCAPaillardJM, et al.Evaluation of micromechanical behaviour of plasma electrolytic oxidation (PEO) coatings on Ti–6Al–4V. Surf Coat Technol2010; 204: 3399–3409.
14.
LiuJWWangPTangYT, et al.Effect of Bi2S3 on characteristics of micro-arc oxidation coating formed on TC4 alloy. Int J Electrochem Sci2021; 16: 150919.
15.
ZhuLJLiHZMaQM, et al.The mechanism for tuning the corrosion resistance and pore density of plasma electrolytic oxidation (PEO) coatings on Mg alloy with fluoride addition. J Magnesium Alloys2021; 11: 2823–2832.
16.
ZhangXJLuoXOuWX, et al.Effect of Er on the characteristics of an oxide coating prepared by micro-arc oxidation on a 7075 aluminum alloy. Int J Electrochem Sci2020; 15: 3445–3452.
17.
DiSCGuoYPLvHW, et al.Microstructure and properties of rare earth CeO2-doped TiO2 nanostructured composite coatings through micro-arc oxidation. Ceram Int2015; 41: 6178–6186.
18.
ZhangMYGaoPJiaXB, et al.The effect of trace rare earth on grain size and properties of copper coating. J Phys: Conf Ser2023; 2587: 012013.
19.
Brachetti-SibajaSBDomínguez-CrespoMATorres-HuertaAM, et al.Bath conditions role in promoting corrosion protection on aluminum alloy using rare earth conversion coatings. J Electrochem Soc2012; 159: C40–C57.
20.
WangXZhuMGXiaF, et al.Effects of grain boundary ternary alloy doping on corrosion resistance of (Ce, Pr, Nd)-Fe-B permanent magnets. J Rare Earths2021; 39: 979–985.
21.
Sheng-LinZXiao-LinZHua-HuiC, et al.The role of rare earth nitrate (REN) in phosphating of aluminum alloy. Met Finish2007; 105: 39–45.
22.
ZouYCWangYMSunZD, et al.Plasma electrolytic oxidation induced ‘local over-growth’ characteristic across substrate/coating interface: Effects and tailoring strategy of individual pulse energy. Surf Coat Technol2018; 342: 198–208.
23.
ClyneTWTroughtonSC. A review of recent work on discharge characteristics during plasma electrolytic oxidation of various metals. Int Mater Rev2019; 64: 127–162.
24.
ParkY-JKimW-YKangY-B. Phase equilibria of Al2O3–TiOx system under various oxygen partial pressure: emphasis on stability of Al2TiO5–Ti3O5 pseudobrookite solid solution. J Eur Ceram Soc2021; 41: 7362–7374.
25.
NiuGHildebrandtESchubertMA, et al.Oxygen vacancy induced room temperature ferromagnetism in Pr-doped CeO2 thin films on silicon. ACS Appl Mater Interfaces2014; 6: 17496–17505.
26.
SongSJYanHCaiM, et al.Superhydrophobic composite coating for reliable corrosion protection of Mg alloy. Mater Des2022; 215: 110433.
27.
MamaevAIMamaevaVABeletskayaEY, et al.A theory of a collective microplasma process for formation of nanostructural inorganic nonmetallic coatings through localization of high-energy flows in the nanolayers of the metalelectrolyte interface. Mathematical modeling. Part 1. Russ Phys J2013; 56: 959–969.
28.
KaseemMFatimahSNashrahN, et al.Recent progress in surface modification of metals coated by plasma electrolytic oxidation: principle, structure, and performance. Prog Mater Sci2021; 117: 100735.
