The concept of symmetry is applied to the design of some existing as well as some new deployable space structures. Through the use of axis or plane symmetry, including anti-symmetry, a bay of a deployable structure may be reduced to an equivalent simple kinematic linkage. This axis of symmetry may be in the direction of deployment of the structure so that by providing a fictitious sliding joint along this axis, the problem of the design and analysis of such deployable structures can be simplified to the study of a plane or a face of the given structure. Such axis or plane of symmetry can also be used for the synthesis of new concepts. As an aid to synthesis, platonic solids can also be used for determining the orientation of these symmetric planes. Several examples are considered. A brief discussion on structural symmetry observed in graphs and dual graphs of some deployable structures will also be presented.
Get full access to this article
View all access options for this article.
References
1.
AdamsL.R., The X-Beam as a Deployable Boom for the Space Station, NASA CP-2506, 1988, pp. 59–66.
2.
CoynerJ.V., Box Truss Development and its Applications, Proceedings of Large Space Antenna Systems Technology-1984, Dec.4–6, 1984, pp. 213–233.
3.
KeggC.M., Thermally Stable Deployable Structure, NASA CP-2506, 1988, pp. 45–57.
4.
RhodesM.D., New Concepts in Deployable Beam Structures, Proceedings of Large Space Systems Technology 1984, Dec. 4–6, 1984. pp. 331–348.
5.
RhodesM.D., and MikulasM.M.Jr., Deployable Controllable Geometry Truss Beam. NASA TM-86366. 1985, pp. 1–10.
6.
TakamatsuK., OnodaJ. and HiguchiK., New Concepts of Deployable Truss Units for Large Space Structures, Copyright AIAA, Inc., 1987, pp. 695–704.
7.
KuwaoF., MotohashiS., YoshiharaM., TakaharaK. and NatoriM., The Design and Development of a Two-Dimensional Adaptive Truss Structure, NASA CP-2470, 1987, pp. 19–34.
8.
WardenR.W., Folding Articulated, Square Truss, NASA CP-2470, 1987, pp. 1–17.
9.
RosenfeldY., and LogcherR.D., New Concepts for Deployable-Collapsible Structures, International Journal of Space Structures, Vol. 3, 1988 pp. 20–32.
10.
JewellR.E., Deployable Platform System Development, Large Space Systems Technology-1981, NASA CP-2215, Nov. 16–19, 1981, pp. 219–233.
11.
MikulasM.M.Jr., and BushH.G., Advances in Structural Concepts, Large Space Systems Technology-1982, Nov. 30-Dec. 3, 1982, NASA LaRC, Hampton, VA.
12.
GreenbergH.S. and EnglerE.E., Development of Deployable Structures for Large Space Platform Systems, Vo1. 1, Interim Report, NASA CR-170689, Aug.1982, Rockwell International Corporation.
13.
CoxR.L. and NelsonR.A., Development of Deployable Structures for Large Space Platform Systems, NASA CR-170690, Oct.1982, Vought Coporation.
14.
HedgepathJ.M., Primary Design Requirements for Large Space Structures, Second AIM Conference on Large Space Platforms, Feb. 2–4, 1981, San Diego, CA.
15.
WarnaarD.B., and ChewM., “Conceptual Design of Deployable-Foldable Truss Structures using Graph Theory, Part I: Graph Generation, Part II: Generation of Deployable Truss Module Design Concepts,” Proceedings of the 21st Bienial Mechanisms Conference, Chicago, IL, 1990, DE-Vol. 26, pp. 107–125. Also accepted for publication in the Journal of Mechanical Design.
16.
SohnW.J., and FreudensteinF., An Application of Dual Graphs to the Automatic Generation of the Kinematic Structures of Mechanisms, Journal of Mechanisms, Transmissions, Automation in Design, Vol. 108, 1986, pp. 392–398.
17.
LoebA.L., Space Structures: Their Harmony and Counterpoint, Addison-Wesley Publishing Company, Massachusetts, 1976.
18.
HoldenA., Shapes, Space and Symmetry, Columbia University Press, New York, 1971.
19.
BorregoJ., Space Grid Structures. The MIT Press, Cambridge, Massachusetts, 1968.
20.
KumarP., A Systematic Procedure for the Analysis and Design of Deployable Space Structures, M.S. Thesis, Old Dominion University, May1990.
21.
WarnaarD.B., ChewM., “Generation of all Folded Configurations of Deployable-Foldable Truss Structures using Graph Theory”, Presentation at the 33rd Structures, Structural Dynamics and Materials Conference in Dallas, TX. April 13–15, 1992.
22.
WarnaarD.B., ChewM., “A Method for Detecting Isomorphism in Graphs using Vertex Degree Correspondence with Partitioning”, Presentation at the 22nd ASME Biennial Mechanisms Conference in Phoenix, AZ, September 13–16, 1992.
23.
WarnaarD.B., ChewM., “Theory on Joint Specification in the Design of Deployable Truss Structures”, Presentation at the 22nd ASME Biennial Mechanisms Conference in Phoenix, AZ, September 13–16, 1992.
24.
WarnaarD.B., ChewM., “An Explosion-Implosion Technique for the Conceptual Synthesis of Deployable Truss Structures”, presented at the 1st Aerospace Design Conference, in Irvine, CA. February 3–6, 1992.
25.
WarnaarD.B., ChewM., “An Expert System Approach to the Selection of Conceptual Designs of Deployable Truss Structures” Presented at the 1st Aerospace Design Conference, in Irvine, CA. February 3–6, 1992.
