This paper describes the influence of initial shape imperfections of lattice shells on their general stability. An adequate mathematical model for the analysis of the shell instability by using a direct method (FEM) and a shell analogy method is presented. The reduction coefficient k for calculation of the critical load is derived. An illustrative example is used for comparison of the results calculated by the two numerical methods.
Get full access to this article
View all access options for this article.
References
1.
DaviesR. M. (ed.), Space Structures, Proceedings of the First International Conference on Space Structures, University of Surrey, Guildford, 1966, John Wiley and Sons, New York, 1967.
LivesleyR. K., Matrix Methods of Structural Analysis, 2nd edn, Pergamon, Oxford, 1975.
4.
ZienkiewiczO. C., The Finite Element Method in Engineering Science, 1st edn, McGraw-Hill, London, 1971.
5.
StricklinT. A.HaislerW. E.RiesemannA. V., Geometrically nonlinear structural analysis by direct stiffness method, J. Struct. Div. ASCE, 97 (1971), 2299–314.
6.
ZingaliA. E., Analisi non lineare e post-buckling delle coperture reticolari (Nonlinear analysis and post-buckling of reticulated roofs), Istituto di Scienza delle Costruzioni, Report No. 215/1977, University of Rome, 1977.
7.
SumecJ., Regulárne mriežkové dosky a škrupiny (Regular Lattice Plates and Shells), 1st edn, VEDA Publishing House, Bratislava, 1984.
8.
ZingaliA. E., Contributo allo studio dell'instabilita per ‘snap-through’ delle cupole geodetiche a maglie triangolari (Contribution to the instability of ‘snap-through’ of geodesic dome), Istituto di Scienza delle Costruzioni, Report No. 234/1978, University of Rome, 1978.
9.
TimoshenkoS. P.KriegerS. Woinowski, Theory of Plates and Shells, 9th edn, McGraw-Hill, New York, 1959.
10.
WrightD. T., Membrane forces and buckling in reticulated shells, J. Struct. Div. ASCE, 91 (1965), 173–201.
11.
SumecJ., Influence of initial imperfection of a spherical reticulated dome on its stability, Acta Technica ČSAV, 28 (1983), 206–17.