Form-control of shell structures generated from hanging models with target heights

Abstract

Shell structures generated from hanging models have structurally efficient forms. Form-control of these shells, which aims to obtain structural forms with single- and multiple target heights due to some architectural requirements, is discussed in this article. First, the vector form intrinsic finite element method is applied to generate the equilibrium form of hanging membranes and thus shell structures. Subsequently, the form-control problem is discussed, which aims to generate a structural form subject to given target height constrains. By introducing the Local Linearization Method to adjust Young’s modulus of the initial structural model, a form-control strategy to generate the equilibrium structural form with a single target height is proposed. By introducing the Inverse Iteration Method to adjust the geometry of the initial model, a form-control strategy to generate the equilibrium structural form with several target heights is proposed. Moreover, to verify the effectiveness of the vector form intrinsic finite element method and form-control strategies, structural analyses and shell behavior assessment of these shells are conducted. These strategies are effective and efficient, which can help architects or engineers to determine structurally efficient geometries in the design process much more easily.

Keywords

Form-control hanging models Inverse Iteration Method Local Linearization Method shell structures vector form intrinsic finite element

Get full access to this article

View all access options for this article.

References

Veenendaal

Block

An overview and comparison of structural form finding methods for general networks. Int J Solids Struct 2012; 49(26): 3741–3753.

Heyman

Structural analysis: a historical approach. Cambridge: Cambridge University Press, 1998.

Ramm

Shape finding of concrete shell roofs. J Int Assoc Shell Spat Struct 2004; 45(1): 29–39.

Tomlow

Gaudí’s reluctant attitude towards the inverted catenary. Engineer Hist Herit 2011; 164(4): 219–233.

Chilton

The Engineer’s contribution to contemporary architecture: Heinz Isler. London: Thomas Telford Publishing, 2000.

Ramm

Heinz Isler shells—the priority of form. J Int Assoc Shell Spat Struct 2011; 52(3): 143–154.

Nerdinger W With

Meissner

et al . (eds). Frei Otto complete works: lightweight construction, natural design. Beijing, China: China Architecture & Building Press, 2010.

Rippmann

Funicular shell design: geometric approaches to form finding and fabrication of discrete funicular structures. PhD Thesis, ETH Zurich, Zurich, 2016.

Day

AS.

An introduction to dynamic relaxation. Engineer 1965; 29(2): 218–221.

10.

Linkwitz

Schek

HJ.

Einige Bemerkungen zur Berechnung von vorgespannten Seilnetzkonstruktionen. Ingenieur Archiv 1971; 40: 145–158.

11.

Schek

HJ.

The force density method for form finding and computation of general networks. Comput Method Appl M 1974; 3: 115–134.

12.

Haug

Powell

. Finite element analysis of nonlinear membrane structures. In: IASS Pacific symposium part II: on tension structures and space frames, Tokyo, Japan, 1972, pp. 93–102.

13.

Bletzinger

K-U

Ramm

Form finding of shells by structural optimization. Eng Comput 1993; 9: 27–35.

14.

Ting

Shih

Wang

. Fundamentals of a Vector Form Intrinsic Finite Element: part I. Basic procedure and a plane frame element. J Mech 2004; 20(2): 113–122.

15.

Ting

Shih

Wang

. Fundamentals of a Vector Form Intrinsic Finite Element: part II. Plane solid elements. J Mech 2004; 20(2): 123–132.

16.

Shih

Wang

Ting

EC.

Fundamentals of a Vector Form Intrinsic Finite Element: part III. Convected material frame and examples. J Mech 2004; 20(2): 133–143.

17.

Block

Ochsendorf

Thrust network analysis: a new methodology for three dimensional equilibrium. J Int Assoc Shell Spat Struct 2007; 48(3): 167–173.

18.

Vizotto

Computational generation of free-form shells in architectural design and civil engineering. Automat Constr 2010; 19: 1087–1105.

19.

Adriaenssens

Block

Veenendaal

et al . (eds). Shell structures for architecture: form-finding and optimization. London: Routledge, 2014.

20.

Ting

EC.

Large deflection analysis of 3D membrane structures by a 4-particle quadrilateral intrinsic element. Thin Wall Struct 2008; 46: 261–275.

21.

Lien

Chiou

Wang

et al . Vector Form Intrinsic Finite Element analysis of nonlinear behavior of steel structures exposed to fire. Eng Struct 2010; 32: 80–92.

22.

Wang

Tsai

Lin

BZ.

Extremely large displacement dynamic analysis of elastic-plastic plane frames. Earthq Eng Struct D 2011; 40: 1515–1533.

23.

TY.

Dynamic nonlinear analysis of shell structures using a Vector Form Intrinsic Finite Element. Eng Struct 2013; 56: 2028–2040.

24.

Zhao

Wang

Peng

Membrane element based on Vector Form Intrinsic Finite Element and its application in wrinkling analysis of membrane structures. J Build Struct 2015; 36(1): 127–135 (in Chinese).

25.

et al . Form-finding of shell structures generated from physical models. Int J Space Struct 2017; 32(1): 11–33.

26.

Brew

Lewis

WJ.

Free hanging membrane model for shell structures. Int J Numer Meth Eng 2007; 71: 1513–1533.

27.

Vouga

Höbinger

Wallner

et al . Design of self-supporting surfaces. ACM T Graphic 2012; 31(4): 87.

28.

Liu

Pan

Snyder

et al . Computing self-supporting surfaces by regular triangulation. ACM T Graphic 2013; 32(4). Available at: https://dl.acm.org/citation.cfm?id=2461927

29.

Block

Lachauer

Three-dimensional funicular analysis of masonry vaults. Mech Res Commun 2014; 56: 53–60.

30.

Tang

Sun

Gomes

et al . Form-finding with polyhedral meshes made simple. ACM T Graphic 2014; 33(4). Available at: https://dl.acm.org/citation.cfm?id=2601213

31.

Shen

Computational morphogenesis method for space structures based on principle of inverse hanging experiment. J Build Struct 2014; 35(4): 41–48 (in Chinese).

32.

Ting

Duan

TY.

Vector mechanics of structures. Beijing, China: Science Press, 2012 (in Chinese).

33.

Wang

Theory and application of thin shell element based on the Vector Form Intrinsic Finite Element method. PhD Thesis, Zhejiang University, Hangzhou, China, 2013.