An introduction to the use of inkjet for tactile diagram production

Abstract

The three common methods for producing tactile diagrams are mixed-media, swell paper and thermoform. This paper describes a new innovative method for producing tactile diagrams using piezoelectric inkjet technology that overcomes some of the limitations of these methods. A photocuring acrylic polymer ink is repeatedly printed onto a thermoplastic substrate and exposed to ultraviolet light which bonds the ink to the substrate and cures it to a hard state. The speed and precision of the process means that diagrams with fine, yet easily discriminated tactile features will be available to the user relatively cheaply. The process is allied to work in the printed circuit board and rapid prototyping industries, which are using similar inkjet technology to engineer highly toleranced components. It is hoped that the newly available tactile maps will facilitate psychological, psychophysical and cartographic research.

Get full access to this article

View all access options for this article.

References

Bentzen, B.L. (1997) 'Orientation Aids'. In B. B. Blasch , W. R. Wiener & R. L. Welsh (Eds), Foundations of Orientation and Mobility. New York: American Foundation for the Blind.

Clay, K. , Gardner, I. , Bresler, E. , Seal, M. & Speakman, S. (2002) 'Direct Legend printing (DLP) on printed circuit boards using piezoelectric inkjet technology'. Circuit World , 28 (2), 24-31.

Cooley, P. , Wallace, D. & Antohe, B. (2001) Applications of Inkjet Printing Technology to BioMEMS and Microfluidic Systems. Paper presented at the SPIE Conference on Microfluidics and BioMEMS. Adelaide , Australia.

Gardner, J. (1987) Tiger 1000 Personal Tactile Graphics Embosser. Oregon State University, Department of Physics, USA. Retrieved 15/8/02, from the World Wide Web: http://dots.physics.orst.edu/tiger_project.html

Hayes, D.J. , Cox, W.R. & Grove, M.E. (1998) 'Micro-Jet Printing of Polymers and Solder for Electronics Manufacturing'. Journal of Electronics Manufacturing , 8 (3 and 4), 209-16.

Horsfall, B. (1997) 'Tactile Maps: New Materials and Improved Designs' . Journal of Visual Impairment and Blindness, 91 (1), 61-5.

Hudd, A. & Willis, M. (2001) Ink Jet Academy: Theory of Inkjet Technology. Kingfield, ME: Information Management Institute.

Jaquiss, R.S. (2001) Announcement of Tactile Printer Evaluation. International Braille Research Centre. Retrieved 14/04/02, 2002, from the World Wide Web: http://www.nfbnet.org/weblist/aebteam/msg00021.html

Korol, S. & Greb, C. (2000) Solid Ink Printing with Dynamic Drop Size Modulation . Paper presented at NIP16: International Conference on Digital Printing Technologies, Vancouver, Canada.

10.

LaMotte, R.H. & Whitehouse, J. (1986) 'Tactile detection of a dot on a smooth surface: peripheral neural events'. Joumal of Neuroscience, 56 (4), 1109-28.

11.

Lange, M.O. (1998) 'PRINT - Non-Impact Printer and Plotter for Braille/Moon and Tactile Graphics'. Paper presented at the CSUN International Conference on Technology and Persons with Disabilities, Los Angeles, CA.

12.

Lederman, S.J. & Taylor, M.M. (1972) 'Fingertip force, surface geometry, and the perception of roughness by active touch'. Perception and Psychophysics , 12 (5), 401-08.

13.

Morley, S. & Gunn, D. (2002) Making Tactile Graphics. National Centre for Tactile Diagrams, University of Hertfordshire, Hatfield, Herts. AL10 9AB, UK. Retrieved 15/8/02, from the World Wide Web: http://www.nctd.org.uk

14.

Nolan, C.Y. & Morris, J.E. (1963) Tactual symbols for the blind (Final Report: OVR-RD-587) Louisville, KY: American Printing House for the Blind.

15.

Peiffer, R. (no date) Uses of Polymer in Tactile Graphics. EASI: Equal Access to Software and Information, PO Box 18928, Rochester NY 14618 (716) 244-9065. Retrieved 15/8/02, 2002, from the World Wide Web: http://www.rit.edu/∼easi/easisem/pfeiff.html

16.

Pierron, P. , Auboussier, E. , Schlemer, C. & Galley, N. (2000) 'Influence of Transducer Control in DOD Printing' . Paper presented at the NIP16: International Conference on Digital Printing Technologies, Vancouver, Canada.

17.

Pike, E. , Blades, M. & Spencer, C. (1992) 'A comparison of two types of tactile maps for blind children'. Cartographica, 29 (3 and 4), 83-8.

18.

Roffey, C.G. (1982) Photopolymerisation of surface coatings. New York: John Wiley and Sons.

19.

Sengun, M.Z. (1997) 'Impact of Ink Evaporation on Drop Volume and Velocity' . Paper presented at NIP13: International Conference on Digital Printing Technologies, Seattle, Washington, USA.