The Measurement of Low Frequency Impedance Using an Impedance Tube

Abstract

An accurate and reliable prediction of car interior noise would be a significant step towards improving the design of car body panels and trim for a quieter vehicle. Automobile noise is dominated by low frequencies, from 50 to 300 Hz and therefore a technique is necessary to measure acoustic impedance of the trim materials at low frequencies. This paper presents the use of a two-microphone technique to measure impedance at low frequencies. A purpose built impedance tube has been developed based on theoretical analysis of the influence of microphone location on the estimate of impedance. It has been found that the location of the two microphones is crucial to the accuracy of measurement. Analytical results have shown that the ideal microphone location is with both the microphone spacing and the distance from the tested material to the nearest microphone taking the value of a quarter wavelength. Microphone spacing of a half wavelength should be avoided.

Get full access to this article

View all access options for this article.

References

Kitahara

Terada

Watanabe

Study on effective application of soundproofing materials through low noise prototype car development, Int. J. Veh. Design, 5, (4), pp. 490–504 (1984)

Vandenbroeck

Hendricx

W. S. F.

Interior road noise optimization in a multiple input environment. Vehicle NVH and Refinement. Proceedings of Institution of Mechanical Engineers, London, ISBN 0 85298 905 9, pp. 53–58 (1994)

ASTM C 384: Standard test method for impedance absorption of acoustical materials by the impedance tube method. American Society for Testing and Materials. (1990)

Singh

Schary

Acoustic impedance measurement using sine sweep excitation and known volume velocity technique. J. Acoust. Soc. Am., 64, (4), pp. 995–1003 (1978)

Powell

J. G.

Van Houten

J. J.

A tone-burst technique of sound-absorption measurement. J. Acoust. Soc. Am., 48, (6), pp. 1299–1303 (1970)

Chu

W. T.

Impedance Tube Measurements – A Comparative-study of Current Practices. Noise Control Engineering Journal 1991, 37, (1), pp. 3744 (1991)

Seybert

A.F.

Ross

D. F.

Experimental determination of acoustic properties using a two- microphone random-excitation technique. J. Acoust. Soc. Am., 61, (5), pp. 1362–1370 (1977)

Chung

J. Y.

Blaser

D. A.

Transfer function method of measuring in-duct acoustic properties. I. Theory. J. Acoust. Soc. Am., 68, (3), pp. 907–913 (1980)

Chung

J. Y.

Blaser

D. A.

Transfer function method of measuring in-duct acoustic properties. ll. Experiment. J. Acoust. Soc. Am., 68, (3), pp. 914–921 (1980)

10.

ASTM E 1050: Standard test method for impedance absorption of acoustical materials using a tube, two microphones, and a digital frequency analysis system. American Society for Testing and Materials. (1990)

11.

Chu

W. T.

Further experimental studies on the transfer-function technique for impedance tube measurements. J. Acoust. Soc. Am., 83, (6), pp. 2255–2260 (1988)

12.

Bodén

Åbom

Influence of errors on the two-microphone method for measuring acoustic properties in ducts. J. Acoust. Soc. Am., 79, (2), pp. 541–549 (1986)

13.

Banks

L. P.

Peng

Length error analysis for impedance tube measurements. J. Acoust. Soc. Am., 85, (4), pp. 1769–1772 (1989)

14.

Saha

Baker

R. N.

Sound absorption study for automotive carpet materials. SAE Paper 870988, (1987)

15.

Chung

J. Y.

Blaser

D. A.

Transfer function method of measuring acoustic intensity in a duct system with flow. J. Acoust. Soc. Am., 63, (3), pp. 1570–1577 (1980)

16.

Abom

Bodén

, Error analysis of two-microphone measurements in ducts with flow. J. Acoust. Soc. Am., 83, (6), pp. 2429–2438 (1988)

17.

Chu

W. T.

Extension of the 2-microphone transfer-function method for impedance tube measurements. J. Acoust. Soc. Am., 80, (1), pp. 347–348 (1986)

18.

Mills

C. A.

Spiekermann

C. E.

Evaluating acoustic absorption-coefficients by comparative-analysis – Theory Part. J. Acoust. Soc. Am., 91, (2)pp. 696–703 (1992)

19.

Mills

C. A.

Spiekermann

C. E.

Evaluating acoustic absorption-coefficients by comparative-analysis – Experimental Part. J. Acoust. Soc. Am., 91, (2), pp. 704–712 (1992)

20.

Whear

F. R.

An investigation of the structurally induced acoustic field in a car passenger compartment. PhD Thesis, Oxford Brookes University, UK. (1994)