Approaches to estimation of light-weight foam physico-mechanical characteristics are discussed; stochastic models are suggested followed by their computer study. Calculations result in macrostress diagrams in an ensemble of foam system gas structural elements. Model versions of varying density foam systems are considered and their programme implementation examined.
Get full access to this article
View all access options for this article.
References
1.
BerteI.V., CregersA.F., The Rigidity of Lightweight Open-Cell Plastic Foams, Mekhanika kompositnikh materialov, No. 1, 1987, p. 30–37.
2.
BerlinA.A., ShutovF.A., Chemistry and Technology of Gas-Filled High Molecular Polymers, Moscow, Nauka Publishers, 1980.
3.
BlagonadezhinV.L., VorontsovA.N. and MurzakhanovG.H., The Technological Targets of the Mechanics of Structures made of Composite Materials, Mekhanika kompositnikh materialov, No. 5, 1987, p. 859–877.
4.
BondarevG.S., DeminaA.I., , Automated Systems of Physico-Mechanical Analysis, Plasticheskiye massi, No. 2, 1987, p. 53.
5.
ValuyskikhV.P., ProkofiyevV.Yu., The Stochastic Simulation Model of an Open-Cell Foamed Plastic, Primeneniye Sluchaynogo poiska pri reshenii prikladnikh zadach, Kemerova State University, 1985, p. 45–46.
6.
ValuyskikhV.P. and MavrinaS.A., Constructing an Adequate Simulation Model of a Plastic Foam of Open Polyhedron Structure, Mekhanika kompositnikh materialov, No. 4, 1987, p. 28–30.
7.
ValuyskikhV.P., MavrinaS.A. and ProkofiyevV.Yu., Simulation Models of Structural Plastic Foams of Open Polyhedron Structure, Mekhanika kompositnikh materialov, No. 5, 1987, p. 808–812.
8.
VaninG.A., The Basics of Statistical Mechanics of Composite Systems, Mekhanika kompositnikh materialov, No. 1, 1988, p. 21–30.
9.
VorobiyevV.A., KivranB.K. and KoryakinV.P., The Use of Physico-Mechanical Methods in Studying Concrete Properties, Moscow, Stroyizdat Publishers, 1977.
10.
DementyevA.G. and TarakanovO.G., The Structure and Properties of Foamed Plastics, Moscow, Khimiya Publishers, 1983.
11.
ManinV.N., GromovA.N. and GrigoriyevV.P., The Defects and Performance Properties of Polymeric Materials, Leningrad, Khimiya Publishers, 1986.
12.
Methods of Research into the Structure of High Dispersion and Porous Bpdies, Ed. by DubininM.M., Moscow, USSR Academy of Sciences Publishers, 1953.
13.
ObraztsovI.F. and TomashevskyV.T., The Scientific Foundations and Problems of Technological Mechanics of Structures made of Composite Materials, Mekhanika kompositnikh materialov, No. 4, 1987, p. 671–699.
14.
OvchinskiyA.S.A Method of Structural and Simulation Modelling on Computer and its Use in Solving Composite Mechanics Problems, Mekhanika kompositnikh materialov, No. 3, 1987, p. 433–439.
15.
PopovN.N., KrinitskyA.K. and KhomutininYu.V., Automation of Processing of High Rate Materials Testing, Zavodskaya Laboratoriya, No. 10, 1986, 38–40.
16.
Mechanics of Cellular Plastics, Ed. by HilyardN.C., Moscow, Mir Publishers, 1985.
17.
RomanenkovI.G., The Physico-Mechanical Properties of Foamed Plastics, Moscow, Goskomstandart Publishers, 1970.
18.
SandinovD.S. and BartenevG.M., The Physical Properties of Unordered Structures, Novosibirsk, Nauka Publishers, 1982.
19.
SaundersD.H. and FrischK.C., Polyurethanes Chemistry, Moscow, Khimiya Publishers, 1968.
20.
SolomatovV.I., PotapovB.B. and BalakhnoV.M., Computer-Aided Study of Composite Materials Structure, Issledovaniye i praktika zavodskogo proizvodstva zhelezobetona, Trudy NIIZHB, Moscow, 1982, p. 140–143.
21.
KhoroshunL.P. and MaslovB.P., The Methods of Automated Calculation of Physico-Mechanical Constants of Composite Materials, Kiev, Naukova dumka Publishers, 1980.
