British Tests and Controls to Limit the Fire Risks of the Contents of Buildings

Abstract

The past decade has seen the rapid development within the UK of tests and performance specifications to determine and/or control the ignition and burning behaviour of upholstered furniture, mattresses and bed assemblies in domestic, public and institutional premises. The test procedures were based on considerable research including full-scale fire tests and field reports. The resultant tests were almost invariably based on composite specimens except where single material tests were sometimes used for quality control work. Early tests were relatively crude ad hoc procedures, but have been progressively refined and developed. British Standard ignition tests for upholstered seating have been published (BS 5852, Parts 1 and 2) and ignition tests for mattresses and bed assemblies, and burning tests for upholstered furniture, mattresses and bed assemblies are being used within industry and government areas. The rapid development of these tests and their application has led to some overlapping, while many tests are currently being revised or replaced. This paper attempts to outline the current ‘state of the art’ within the UK for fire tests for upholstered furniture, mattresses and bed assemblies.

Get full access to this article

View all access options for this article.

References

British Standard 476, Part 7, Surface spread of flame tests for materials, 1933.

Fire statistics, United Kingdom, 1981, Home Office, London, 1981.

Harland

W. A.

and Woolley

W. D.

, Fire fatality study, BRE IP 18/79, University of Glasgow, 1979.

Palmer

K. N.

and Taylor

, Fire hazards of plastics in furntiure and furnishings, ignition studies, Current Paper 18/74, Building Research Establishment, Garston, UK, 1974.

Palmer

K. N.

, Taylor

and Paul

K. T.

, Fire hazards of plastics in furniture and furnishing, characteristics of burning, Current Paper 3/75. Building Research Establishment, Garston, UK, 1975.

Palmer

K. N.

, Taylor

and Paul

K. T.

, Fire hazards of plastics in furniture and furnishings, fires in furnished rooms, Current Paper 21/76, Building Research Establishment, Garston, UK, 1976.

Flexible polyurethane foam – its uses and misuses, British Rubber Manufacturers' Association, London, 1976, Revised 1983.

Wilson

W. J.

, J. Fire Flammability, 7 (1976) 112.

Report of the technical sub-committee on the fire risks of new materials, Home Office Fire Department, London, 1978.

10.

FMVSS 302, Flammability of interior materials, passenger cars, multi-purpose passenger vehicles, trucks and buses, US Dept. of Transportation, Washington DC, 1972.

11.

CAA 8, Flame resistance testing for aircraft interior materials, Civil Aviation Authority, London, 1974.

12.

AST 1000.001, Preliminary combined fire hazard standard test procedure for non-metallic parts to be installed or employed in the pressurised portion of the fuselage of transport category aircraft. Flammability, smoke emission, toxicity, European Airbus Industrie, Toulouse, 1983.

13.

NES 711, Determination of the smoke index of the products of combustion from small specimens of materials, Issue 02, Ministry of Defence, Bath, 1981.

14.

NES 713, Determination of the toxicity index of the products of combustion from small specimens of materials, Issue 02, Ministry of Defence, Bath, 1981.

15.

NES 714, Determination of the oxygen index of small specimens of material, Issue 02, 1981.

16.

NES 715, Determination of the temperature index of small specimens of material, Issue 02, 1981.

17.

Paul

K. T.

, Chemistry and Industry, 17 (1983) 63–72.

18.

Furniture — an approach to reducing fire hazards, British Plastics Federation, London, 1976.

19.

British Standard DD58, Tests for the ignitability of upholstered seating, British Standards Institution, London, 1978.

20.

British Standard 5852, Part 1, Methods of test for the ignitability of upholstered composites for seating by flaming sources, British Standards Institution, London, 1979.

21.

British Standard 5852, Part 2, Methods of test for the ignitability of upholstered composites for seating by flaming sources, British Standards Institution, London, 1982.

22.

Fire Retardant Specifications nos. 2, 3, 4, 5, 6, 7, 10 and 14; Fire Technical Specifications nos. 5 and 15; Department of the Environment/Property Services Agency (DOE/PSA), London.

23.

Christian

S. D.

, Textile Institute and Industry, 17 (1979), 403–4.

24.

Method of test for ignitability of mattresses in the form of bed assemblies, National Bedding Federation, London, 1982.

25.

Textile Flammability, Part I Fire Hazard of Upholstered Furniture, Merseyside County Fire Brigade, 1982.

26.

Consumer protection, the upholstered furniture (safety) regulation 1980, HMSO, London, 1980.

27.

Consumer protection, the upholstered furniture (safety) (amendment regulations) 1983, HMSO, London, 1983.

28.

Fire Precaution Act 1971, HMSO, London, 1971.

29.

Draft guide to fire precautions in existing residential care premises; Draft guide to fire precaution in hospitals; Home Office, Scottish Home and Health Departments, 1983.

30.

Anderson

and Magnusson

S. E.

, Report 80–4, Lund Institute of Technology, 1980.

31.

Palmer

K. N.

, Paul

K. T.

and Taylor

, BRE Report No. 82/K4.4, HMSO, London, 1979.

32.

Brabrauskas

, J. Fire Sciences, 1 (1983), 9–33.